Tender For Repairing Of Illumination System At Okhla Stp.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Oct 2026
4 days left
EMD
23400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Illumination System At Okhla Stp.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of street light poles G.I. pipe (medium class) size- 7 M, dia.- 90 mm, with 0.75 M, bend for cable entry including bending the pipe to the required shape complete as required. |
| 2 | Supply of LED street light made up of pressure die cast housing with toughened glass and individual high-power LEDs with secondary optics, IP 66 protection and impact resistance of IK07. LED Light 70/72 W capacity & Suitable for pole Dia. Make- Bajaj/ Havells/ Crompton/ Phillips/ Any DJB approved make. DJB SOR (E&M)2024-25 Item code- 19.10.6 |
| 3 | Supply of energy saving, environmental friendly, long life, exclusive innovative die-cast aluminum IP 65 flood light suitable for highlighting architectural façade high mast. LED Light 150 W capacity. Make- Bajaj/ Havells/ Crompton/ Phillips/ Any DJB approved make |
| 4 | Supply of Aluminum conductor 16 Sq mm X 3 Core, XLPE insulated PVC inner sheathed, armoured cable. 650/1100V Grade as per IS 7908(Part 1)1988. Make: Havells/Grandlay/Gloster/ Any DJB approved make. DJB SOR (E&M)2024-25 Item code- 39.1.8 |
| 5 | Supply of PVC insulated and FR PVC round sheathed, Copper Conductor (flexible) industrial cable, 1100 volt, confirming to IS 694. Cable Size 2.5 sq.mm X 1 core. Make: Havells/Grandlay/Gloster/Any DJB approved make. DJB SOR (E&M)2024-25 Item code- 43.1.2 |
| 6 | Supply of PVC insulated and FR PVC round sheathed, Copper Conductor (flexible) industrial cable, 1100 volt, confirming to IS 694. Cable Size 2.5 sq.mm X 5 core. Make: Havells/Grandlay/Gloster/ Any DJB approved make |
| 7 | Providing & fixing of light class G.I. pipe of 50 mm dia. one meter length along with each pole for protection of underground cable. |
| 8 | Providing of 6 mm dia. steel wire rope for installation between winch and lantern carriage. The breaking load of each rope shall have factor of safety of over 5 for the system at full load no intermediate joints are acceptable in view of the required safety. |
| 9 | Providing of single Door PVC Termination box (Dust)/ water proof)/ distribution box of suitable size with danger plate for installation at street light poles including nut bolts & mounting bracket etc. |
| 10 | Providing of 32 A double pole MCBs to installation in the electric panel box for termination of power cable LED Lights poles. Make. L&T/Siemens/C&S/Havells. DJB SOR (E&M)2024-25 Item code- 43.7.4 |
| 11 | Dismantling of the damaged concrete foundation of the existing street light poles with manual means including arrangement of all tools and tackles along with all safety precautions as per the requirement of the job. |
| 12 | Making of new foundation for the metallic street light poles with cement concrete including excavation and refilling etc. including arrangement of all tools and tackles along with all safety precautions as per the requirement of the job. |
| 13 | Laying of one number 16 Sq mm X 3 Core PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. including arrangement of all tools and tackles along with all safety precautions as per the requirement of the job. DJB SOR (E&M)2024-25 Item code- 37.1.1 |
| 14 | Dismantling of old LED Lights & PVC terminal box from street light pole & high mast lights and fixing of New LED Street Lights & PVC terminal box on street light pole including termination of Power cable at the source and PVC termination box installed at each pole & MCB etc. including arrangement of all tools and tackles along with all safety precautions as per the requirement of the job. |
| 15 | Painting of complete MS Street Light Poles, GI Pipe & high mast pole with one layer of anti-corrosive Primer and two layer of paint Colour as per installation by engineer-in-charge suitable for gaseous zone. |
| 16 | Testing & commissioning of the cable, terminal box & other installed accessories and also checking all the connections prior to switching on as follows: (i) Continuity and earth testing. (ii) Checking phase to phase, neutral to body, neutral to earth and phase to earth connections. (iii) Functional test. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender