Tender For Stmc Work For 1 No. Of Road For A Length Of 23.424 Km Under Sambalpur (R And B) Division-Ii, (Package-3)
Tender Value
99.73 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
10 days left
EMD
99800
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stmc Work For 1 No. Of Road For A Length Of 23.424 Km Under Sambalpur (R And B) Division-Ii, (Package-3)
BOQ
| Sl. No. | Item Description |
| 1 | Govindpur to Garposh road from 0/000 to 23/424kmClearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes |
| 3 | Maintenance of Earthen Shoulder (filling with fresh soil)--Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment. |
| 4 | Clearing slab/ box type culverts and pipe culverts including clearing, cleaning and reshapping of upstream and down stream faces of these culverts with in right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete in all respect as per direction of Engineer In-Charge. (Frequency of cleaning will be one time in a year i.e. before start of monsoon).-- Slab/Box Type Culverts. |
| 5 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 6 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface for Transvers Bar Marking(TBM) |
| 7 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc (a) 5th KM Stone |
| 8 | Reinforced cement concrete M-15 Grade Kilometre stone of standard designs as perIRC-8-1980 ,Fixing in position including painting & printing etc complete (b) Ordinary Kilometre Stones |
| 9 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.(For Fixing of Delineator) |
| 10 | Plain Cement Concrete M-20 complete as per Drawing and Technical Specifications. stone chips including hoisting and laying including cost, conveyance taxes of all materials, labour T&P required for the work etc. complete as per specification and direction of the EIC.(For Fixing of Delineator) |
| 11 | Road Delineators (Supplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings.) |
| 12 | Supplying, fitting, fixing of roads sign board as per approve drawing including cost, conveyance, royality, taxes of all materials, labour, T & P etc. providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC: 67-2010 made of A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides as per requirement in table 6.1 of IRC-67/2010 and as per technical specifically of clause 801.3 supported on a mild steel angle iron post 75mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 40cm x 40cm x 60cm. 60cm below ground level as per approved drawing including excavation, curring etc. complete under the supervision of Engineer-in-charge.1800mmx1200mm size board. +2300mmx600mm size board. (Tripple Chevron) |
| 13 | 80 cm x 60 cm rectangular |
| 14 | 60 cm x 45 cm rectangular (Object Hazard) |
| 15 | 90 cm Octagonal (STOP) |
| 16 | Chevron (60 cm x 50 cm rectangular) |
| 17 | 60 cm circular |
| 18 | 90 cm circular |
| 19 | Providing & Laying B.U.S.G. of 75mm thick in two layer using tack coat 3.0kg/10 sqm 25mm to 40mm size B.H.G.C.B. metal of 0.45cum & 12.0kg of penetration grade of bitumen in one layer with 0.12cum of 12mm size B.H.G.C.B. chips as key stone per 10sqm and laying & spreading as per Technical Specifications and as per Clause -506 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 20 | Providing and laying semi dense bituminous concrete with100-120 TPH batch type HPM producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @4.5 to 5 percent of mix and filler |
| 21 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. |
| 22 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender