Tender For Reinforcement Of Gobindpur Gramatala Tw Lip Under Rasgobindpur Block In Mayurbhanj District
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
7 days left
EMD
2500
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reinforcement Of Gobindpur Gramatala Tw Lip Under Rasgobindpur Block In Mayurbhanj District
BOQ
| Sl. No. | Item Description |
| 1 | Re-Developing the TW with Air compressor continuously for adequete and clean & sand free water for each TW 8 hours including labour charges for lifting of pumpsets, pipes and dismantling of delivery fittings from TW and Lowering of the same after Re- development works with transportation of each L.I.Ps. |
| 2 | E/Work in excavation in hard soil in Fdn. Including rough dressing & levelling the bed not exceeding 0.30 m depth as per specification |
| 3 | Filling in F&P with sand wall watered and rammed. |
| 4 | Cement Concrete (1:4:8) with 40mm size of h.g. metal. |
| 5 | Filling in F&P with excavated materials quantity |
| 6 | Cement Concrete (1:2:4) with 12mm size C.B. chips including hoisting and laying |
| 7 | Brick masonary in cm (1:6) in foundation & plinth.(Fly Ash) |
| 8 | Removing of Old cement Plaster |
| 9 | 12mm thick cement plaster over brick works. |
| 10 | Rigid and smooth centering & shuttering for RCC works including tales works after dismantlling then after centering including cost of all materials in ground floor (Chhaja & Slab) |
| 11 | Cost of steel including Labour charges for cutting, bending, binding, straightening and laying grills & placing in position including cost of binding wire 18 to 20 guage for 1.2Qntl. |
| 12 | Cement Punning |
| 13 | Dismantiling and removing 2.5mm thick A.S Flooring |
| 14 | 2.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips. |
| 15 | Cost of M.S. Pannel Iron Door with M.S.Frame etc (size 1.20 mx1.98m) |
| 16 | White washing two coats to walls with shell lime of approved shade on new work to give an even shade including cost of lime & labour etc. complete. |
| 17 | Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of cement paint & labour etc complete. |
| 18 | Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete. |
| 19 | Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete. |
| 20 | Writing Charges of display board |
| 21 | Labour charges of laying and fitting of 160 mm dia PVC pipe |
| 22 | Cost of 160 mm dia PVC pipe |
| 23 | Cost of outlet |
| 24 | 80 mm dia Nominal Bore G.I.Pipe having wall thickness 4.5 mm, Electrical resistence welded of Medium Class confirming to IS 1239 ( Pt) - 1 / 2004) with latest ammendment screwed at both ends as per IS 554 with socketed at one end and other end protected with plastic thread protector including its transportation and unloading at LIP site. The socket confirming to IS - 1239 (Pt)-II / 1992 ) with latest ammendment in random length of 4 to 7 M. Each pipe should bear ISI certification and manufacturer Name / Trade marks. (as per S/R 2022) |
| 25 | 80 mm dia G.I.Bend (Medium Duty) confirming to IS No. 1239 (Pt-II/1992) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 26 | 80 mm dia GI Socket (Medium Duty) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 27 | 100 x 80 mm dia G.I Reducer |
| 28 | 80 mm dia M.S TW clamp (Pair) with ISI mark of reuted brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 29 | 100 mm dia Nominal Bore G.I.Pipe having wall thickness 4.5 mm, Electrical resistence welded of Medium Class confirming to IS 1239 ( Pt) - 1 / 2004) with latest ammendment screwed at both ends as per IS 554 with socketed at one end and other end protected with plastic thread protector including its transportation and unloading at LIP site. The socket confirming to IS - 1239 (Pt)-II / 1992 ) with latest ammendment in random length of 4 to 7 M. Each pipe should bear ISI certification and manufacturer Name / Trade marks. (as per S/R 2022) |
| 30 | 100 mm dia G.I.Bend (Medium Duty) confirming to IS No. 1239 (Pt-II/1992) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 31 | 100 mm dia GI Socket (Medium Duty) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 32 | 100 mm dia G.I Flange (Medium Duty) confirming to IS No. 6392 / 1971 with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 33 | 100 mm dia C.I. Sluice Valve Flanged type PN-1.0 as per IS 14846-2000 standard) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 34 | Cost of 160 x 160 x 160 mm dia Spigot moulded reducing UPVC Tee |
| 35 | 160x110 mm dia PVC Reducer |
| 36 | 110 mm dia PVC FTA |
| 37 | 160 mm dia PVC End cap |
| 38 | 160x160x100 mm dia G.I Outlet Tee weldless long radiuos made out of GI socket Medium 300 mm long with ID 160 mm ID (Suitable for Insert directly 160 mm dia PVC Pipe with minimum 100 mm long inside the GI socket ) Fitted with 1.95 Mtr long 100 mm dia GI Pipe as per IS 1239 Part-1 or IS - 1161 welded with 2 nos 100 mm dia GI flange in between the 1.95mtr GI pipe as per IS 1239 part-1 or IS 1161 bending with long radius GI Pipe in 90 Degree (Bending 90 Degree long radius both side without welding ) water locking arrangements made out of 1 no of 100 mm dia open flange and 1 No of 100 mm dia Blind flange with hings gaskets arrangements for waterlocking system. |
| 39 | Cost of RCC protection cover stand for Tube well |
| 40 | 6 MM Steel wire rope PVC insulated |
| 41 | Cutting , threading of 100 mm dia G.I.Pipes to proper size with required length making leak proof for flow of water and fitting it in proper position including transportation of Materials to Work site etc. complete as per the direction of the Site Engineer in Charge. |
| 42 | Installation of 6 HP Submerssible Pumpsets lowering with 100mm dia G.I.Pipe of required length jointed with Bend, socket and Delivery G.I & HDPE pipe fitting with clamp over RCC pillar support & fitted Flange with Sluice valve including transportation complete as per the direction of the Site Engineer in Charge. |
| 43 | MS Nut Bolts (1/2\\" x 5/8\\") including all cost conveyance, cess etc complete but excluding cost of GST. |
| 44 | Cost supply of 3 mm thick Rubber Insertion including all cost conveyance, cess etc complete but excluding cost of GST. |
| 45 | Stainless steel Nut & Bolt and U clamp wire rope PVC insulated |
| 46 | 6 HP / 4.5 K.W Energy Efficiency Submerssible Pumpset of total head 25 mtr having 700 LPM discharge of reputed brand with BEE 3 Star Rated energy efficiency suitable for 200 mm dia Tube well as per IS Specificaation with 2 pair U clamp and 30 Mtr of 4.00 Sqm flat cable and impeller bronze grade LTB to of IS 318/1981 confirming to IS specification including all cost, coneyance, cess etc complete but excluding cost of GST. |
| 47 | 10 HP Auto Star Delta Starter |
| 48 | 63 Amp Triple Pole Main Switch confirming to IS No-4064 (Part-1 & 2) with ISI Marking of reputed company having utilisation capacity category AC-22 reputed brand of ISI specification including all cost conveyance, cess etc complete but excluding GST. |
| 49 | 2.5mm² Submerssible (3 Core) Flat Cable ISI mark of reputed brand of ISI specification all cost, conveyance, cess etc complete but excluding GST. |
| 50 | 3 KVAR Power Shunt Capacitor with ISI mark of reputed approved brand of ISI marked including all cost conveyance, cess etc complete but excluding cost of GST. |
| 51 | 3 Core x 10mm² Insulated ( HD ) Tropoted armoured Electric Cable with Alluminium conductor for use in 3 phase power system of working voltage up to and including 1100 Volts at 50 Hz confirming to IS 7098 (Pt - 2 ) of approved brand of ISI Marked including all cost conveyance, cess etc complete but excluding cost of GST. |
| 52 | 2.5 mm² PVC Single core Copper wire with ISI mark of reputed approved brand of ISI Marked including all cost conveyance, cess etc complete but excluding cost of GST. |
| 53 | Making earthing with required earthing materials like Charcoal , Common salt , Conduit pipe, Soft solder , Alcape , Nuts & Bolts, Cable sockets etc including excavation of earth pits of size (1.20 M x 1.20 M x 1.5 M) for fixing of earthing pipes of size 37.5 mm dia x 1.5 M length with required slottings in Pipe and fitting with 37.5 mm dia G.I.Flange including excavation of earthing trench for laying of earthing G.I.Wire and filling the trench & pit after fixing of pipes on completion of earthing works including supply of all the materals, including transportation etc.complete as per the direction of the Site Engineer in Charge. |
| 54 | Installation of Starter, Capacitor, fitting of 63 AMP Kit Kat, jointed with Troppodar cable to main supply line & substation cable with making cable trench including transportation all complete as per the direction of the site Engineer in charge.. |
| 55 | Pump chamber wiring with PVC conduit pipe with fitting of necessary beds, drilling hole on the wall, fittng of bulb , clamping as per requirement complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender