Rural Development Government Departments Closing in 13 days TDR #57761876

Tender For Construction Of R.I. Office Cum Residential Building At Balisira Under Asika Tahasil, Ganjam_Building

Issued by Government Departments · Ganjam, Odisha
Tender Value
48.45 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
13 days left
EMD
48460
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of R.I. Office Cum Residential Building At Balisira Under Asika Tahasil, Ganjam_Building

BOQ

Name of Work:- Construction of R.I. Office cum Residential building at Balisira under Asika Tahasil, Ganjam_building
Sl. No. Item Description
1Dismantaling and removing RCC columns,beams,slab,staircase, landing, lintels including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. complete.[A/R-2006,Page-221, Item no.24]
2Dismantaling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. complete.[A/R-2006,Page-214, Item no.3]
3Dismantaling & removing doors windows & ventilators including removal of frames, hinges, fastening & stacking the same for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. complete. [A/R-2006,Page-219, Item no.18]
4Earth work in excavation of foundation in hard soil with in intial lead and lift including rough dressing and levelling the bed etc complete
5Filling F&P with sand well watered and rammed
6Cement Concrete (1:3:6) using 4cm size B.H.G.H.B. metal including cost conveyance royalaties Taxes of all materials etc complete
7Flyash Brick masonary in cement mortor (1:6) in foundation and plinth including watering & curing with cost conveyance royalities taxes of all materials, labour charges, T&P etc. required for the work complete.
8Flyash Brick masonary in cement mortor (1:6) in Superstructure including watering & curing with cost conveyance royalities taxes of all materials, labour charges, T&P etc. required for the work complete. GF
9R.C.C. work of M-20 grade using 20mm & down graded bhcbg chips including cost conveyance etc. complete (a)Column in Sub-structure GF
10Column in Superstructure GF
11Plinth Beam
12Lintel GF
13Roof Beam GF
14Roof Slab GF
15Chajja GF
16Stair GF
17Straighing,cutting,bending,binding of M.S.rods/tor steel bars including grills and placing in position for R.C.C work including cost allmaterials,labour, T&P etc complete including cost of binding wire 18 to 20 gauge GF
1820mm thick cement plastering in cement mortor (1:6) to Plinth work including cost, conveyance, royalties , taxes of all materials etc complete. GF
1916mm thick cement plastering in cement mortor (1:6) to brick work including cost, conveyance, royalties , taxes of all materials etc complete. GF
2012mm thick cement plastering in cement mortor (1:6) over brick masonry including cost, conveyance, royalties , taxes of all materials etc complete. GF
21Supplying,fitting,fixing Angle Iron Door frame ,window frame with grill using A.I of size (40x40x5)mm,M.S.Flats of size(25x5) mm including priming etc. complete. GF
22Vitrified tile Flooring including cost of all materials , all labour & other materials etc complete. GF
23Vitrified tile Dados including cost of all materials , all labour & other materials etc complete. GF
24Painting two coats to new Iron work with any approved Enamel paint including sand papering & polishing the surface with cost of material,labour charges,T&P etc. required for the work complete. GF
25Wall Painting two coats with Distemper of approved shade over a coat of Priming on new work to give an even shade including cost of Distemper,primer,labour charges, T&P etc. required for the work complete. GF
26Weather coat paint of 2coats to outside wall with any approved shade over a coat of Priming with any approved (water bound) primer,labour charges,cost of materials etc. complete GF
27Labour for fitting and fixing of MS Shutters for doors,window and grill gates,Collapsible gate including filling the holes with C.C (1:3:6) etc.complete GF
28Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. GF
29Supplying and fitting fixing of Un-plasticised poly Vinyle Chloride (UPVC) (FENESTA/NCL VEKA LTD) Two Track - Two Panel Sliding Window Casement window with top fixed 60 series duly manufactured using UPVC reinforced profile PVC reinforced profile of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.25mm capable of mounting single glazing system, structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDMD 638-14/EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge. GF
30Supplying and providing Anti-termite treatment to foundation and floor of the building etc. comp.
31R.C.C. work of M-20 grade using 20mm & down graded bhcbg chips including cost conveyance etc. complete (b)Column in Superstructure FF
32Lintel FF
33Roof Beam FF
34Roof Slab FF
35Chajja FF
36Stair FF
37Straighing,cutting,bending,binding of M.S.rods/tor steel bars including grills and placing in position for R.C.C work including cost allmaterials,labour, T&P etc complete including cost of binding wire 18 to 20 gauge FF
38Fly ash Brick masonary in cement mortor (1:6) in Superstructure including watering & curing with cost conveyance royalities taxes of all materials, labour charges, T&P etc. required for the work complete. FF
3916mm thick cement plastering in cement mortor (1:6) to brick work including cost, conveyance, royalties , taxes of all materials etc complete. FF
4012mm thick cement plastering in cement mortor (1:6) over brick masonry including cost, conveyance, royalties , taxes of all materials etc complete. FF
41Supplying,fitting,fixing Angle Iron Door frame ,window frame with grill using A.I of size (40x40x5)mm,M.S.Flats of size(25x5) mm including priming etc. complete. FF
42Painting two coats to new Iron work with any approved Enamel paint including sand papering & polishing the surface with cost of material,labour charges,T&P etc. required for the work complete. FF
43Vitrified Tile Flooring in rooms including cost of all labour & other materials etc complete. FF
44Vitrified tile Dados including cost of all materials , all labour & other materials etc complete. FF
4520mm thick cement grading plaster in cement mortor (1:4) over roof slab including cost, conveyance, royalties , taxes of all materials etc complete. FF
46Wall Painting two coats with plastic emulsion paint of approved shade over a coat of Priming on new work to give an even shade including cost of Distemper,primer,labour charges, T&P etc. required for the work complete. FF
47Weather coat paint of 2coats to outside wall with any approved shade over a coat of Priming with any approved (water bound) primer,labour charges,cost of materials etc. complete FF
48Labour for fitting and fixing of MS Shutters for doors,window and grill gates,Collapsible gate including filling the holes with C.C (1:3:6) etc.complete FF
49Supplying and fitting fixing of Un-plasticised poly Vinyle Chloride (UPVC) (FENESTA/NCL VEKA LTD) Two Track - Two Panel Sliding Window Casement window with top fixed 60 series duly manufactured using UPVC reinforced profile PVC reinforced profile of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.25mm capable of mounting single glazing system, structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDMD 638-14/EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge. FF
50Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. FF
51Providing P.C.C ( 1:2:4) with 12 size stone aggregates Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57761876
AUTHORITY Government Departments
TENDER VALUE 48.45 Lakhs
LAST DATE 13-10-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of R.I. Office Cum Residential Building At Balisira Under Asika Tahasil, Ganjam_Building
Basic Detail
Tender No Online Tender/09/RWDBNJ/2026-2027
Bidding Type Tender
Location
City Ganjam
State Odisha
Key Dates
Publish Date 29 Sep 2026
Submission Date 13 Oct 2026
Open Date 14 Oct 2026
Finance
Tender Value 48.45 Lakhs
Tender Fee 6000
EMD 48460
Exemption Available
Document List
b857bc6d-9c8c-4d99-a89d-9ad062ca3efb.html
BOQ_610866.xls
Tendernotice_1 (22).pdf
Tendernotice_2 (6).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Oct 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

b857bc6d-9c8c-4d99-a89d-9ad062ca3efb.html

xls

BOQ_610866.xls

pdf

Tendernotice_1 (22).pdf

pdf

Tendernotice_2 (6).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders