Tender For Construction Of Sump Well For Lift Pump House Along With Installation Of 03 No. Rw Pump With Motor & All Accessories At Bbmb Water Works At Pandoh.
Tender Value
49.37 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
26 days left
EMD
98750
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sump Well For Lift Pump House Along With Installation Of 03 No. Rw Pump With Motor & All Accessories At Bbmb Water Works At Pandoh.
BOQ
| Sl. No. | Item Description |
| 1 | (A) Sump Well :-Earth work in excavation of foundations of bridges culverts, buildings including handling of material with a combined lead of 15 meters dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around: -(a) For ordinary gravel soil involving pick work |
| 2 | Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipelines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil outside/inside the town involving lead up to 15 meter complete in all respect.-(d) Exceeding 3.00 m depth up to 4.5 m depthiii) For semi-conglomerate soil of having gravel/Boulder up to 50% |
| 3 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.B. PCC Grade M20 |
| 4 | Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer asper IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure. |
| 5 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe500 grade as per IS1786-2008), for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. |
| 6 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 7 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) B. Class PN-1.6 as per ISI (f) 300mm i/d Sluice Valves flanged |
| 8 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) B. Class PN-1.6 as per ISI (i) 450mm i/d Sluice Valves flanged |
| 9 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. |
| 10 | Steel Fe-415, Fe-500, Fe-550 (ISI Marked). (Ex Shop in local Market) (o) MS sheet all gauges (for ventilator) |
| 11 | Wire Gauge 22-gauge 12x12 mesh of (140 G gauge) at site of work (for manhole) |
| 12 | Providing and fixing Manually operated chain pully of capacity 2MT including gantary girders as per latest specifications complete in all respect. |
| 13 | (B) Thrust Block & pipelines :-Excavation manually in trenches for pipelines with straight or open cutting in streets and lanes in built up area where width of street / Lane from wall to wall is less than3meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation watering, including the cost of dewatering of rain water diversion for traffic, night signals. Providing & fixing caution boards watching, fencing, etc. and removal of surplus soil from thesiteupto15meter distance complete in all respects. (a) Earthwork up to 1.5 m. Depth(ii)For Ordinary soil having gravel up to 40% |
| 14 | Cement concrete 1:4:8 (a) with stone ballast 20mm gauge i) mixing by mechanical means using concrete mixer volumetric type |
| 15 | Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. |
| 16 | Cement concrete 1:2:4 (a) With stone ballast or shingle (I) Mixing by manual means. |
| 17 | Cold twisted deformed (Ribbed/Torsteel) Bars (Fe415gradeasper IS1786-2008) for R.C.C works, where not including in the complete rate of RCC including binding &bending and placing in position complete. |
| 18 | Providing, laying, fixing, jointing and testing in trenches MS pipe of following diameters confirming to confirming to BIS3183-2007, of following grade and having wall thickness as specified below with plain end and capable of withstanding required test pressure in random length of 4 to 7 meters, including specials, short pieces, bends, reducers, tees etc. made from parent tube, providing and welding of MS flanges detailed as below. The MS flanges shall confirm to BIS6392-1971 (with latest up to date amendments) duly welded in two layers (two inner and two outer) with pipes at both ends as per relevant BIS standards along with nut sand bolts of required sizes, 3mm thick compressed asbestos fiber /synthetic rubber gaskets confirming to relevant BIS standards. The laying of pipe will include all operation such as cutting, welding, jointing, providing & fixing of MS flanges, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia. of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standard sand the damaged portion of the pipes and specials made form the parent tube shall be provided anticorrosive treatment by applying two coats of anti-corrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also include entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all lead sand lifts. (Earthwork in trenches will be measured and paid for separately).300 mm diameter M.S. pipe |
| 19 | Providing, laying, fixing, jointing and testing in trenches MS pipe of following diameters confirming to confirming to BIS3183-2007, of following grade and having wall thickness as specified below with plain end and capable of withstanding required test pressure in random length of 4 to 7 meters, including specials, short pieces, bends, reducers, tees etc. made from parent tube, providing and welding of MS flanges detailed as below. The MS flanges shall confirm to BIS6392-1971 (with latest up to date amendments) duly welded in two layers (two inner and two outer) with pipes at both ends as per relevant BIS standards along with nut sand bolts of required sizes, 3mm thick compressed asbestos fiber /synthetic rubber gaskets confirming to relevant BIS standards. The laying of pipe will include all operation such as cutting, welding, jointing, providing & fixing of MS flanges, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia. of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standard sand the damaged portion of the pipes and specials made form the parent tube shall be provided anticorrosive treatment by applying two coats of anti-corrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also include entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all lead sand lifts. (Earthwork in trenches will be measured and paid for separately). 450 mm diameter M.S. pipe |
| 20 | (C) Machinery :- Submersible raw water pump set confirming to 1S0 9906 suitable to handle turbidity up to 6000 PPM fitted with bronze impeller/suitable alloy Discharge: 52.83 LPSTotal head in Mts: -20.58 Mtrs.Motor capacity: 30 BHPTotal Quantity 3 No. X 30 HP-90 HP 2 Nos:- 30HP Star Delta Starter panel made out of 16 Gauge sheet, powder coated dust and vermin proof, wall/base mounted and front opening door type with copper insulated wiring suitable to operate 2 Nos. pumps (2 working & 1 stand by) each of the rating 30 HP through Star Delta Starter mechanism and handling the following faults like short circuit, over current, under current, over voltage, under voltage, dry run protection and phase loss with LED ON/OFF & TRIP indicators.2 Sets: Star, Delta and Mains Power Contactors2 Nos: Voltage Protection device to protect panel from over voltage and under voltage complete.2 Nos:- Single phasing and phase reversal protection device to safeguard system from single phasing and phase reversal of the supply voltage.1 No:- Multi function meter indicating different parameters like Current, Voltage.KWH, PF, THD etc with RS 485 communication.1 No :- 200A Main incomer MCCB.2 Nos :-100 A Individual Starter incomer MCCB.1 Set :- Three phase indicating lamps complete with logged switches for individual motors.2 Sets :- LED On / Off & Trip indicator and push buttons, Control and power wiring, Power capacitor, Cooling fan 230 VAC, Control terminal, Bus Bar, i.e. bolt, insulator.1 No:- Surge suppressor device with Isolating MCCB.1 No: - Control Transformer.1 Set:- Independent Control Panel with Switch Fuse Unit and Fuses.24 Mtr:- 6 sq mm 3 core Copper PVC insulated armored power cable (One cable carrying all the three phases)1 Set:- Double loop earthing with Gl plate 600mmx600x3mm thick electrode complete with material such thimbles nuts and charcoal and common salt, 25mmx5mm copper strips Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender