Tender For Construction Of A Modernised Additional Godown Of 3400 Capacity With Electrical Installation And Road At Mettuppalayam Warehouse Complex.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Oct 2026
15 days left
EMD
2.25 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Modernised Additional Godown Of 3400 Capacity With Electrical Installation And Road At Mettuppalayam Warehouse Complex.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning scrub jungle as per standard specifications |
| 2 | Dismantling , clearing awy and carefully stacking materials usefull reuse of damaged Brick Masonry works etc.,complete complying with standard specifications and as directed by the departmental officers |
| 3 | Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting in clusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Supplying and filling in foundation, basement, etc with filling Stone Dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Supply and filling in foundation and basement with Red Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Providing, laying spreading and compacting graded stone aggregates to Wet mix macadam with specified thickness specification including premixing the materials with water at OMC mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base / Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.., complete. |
| 7 | Plain Cement Concrete 1:5:10 (one of cement, five of M.Sand and ten of course aggregate) using 40mm gauge hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and consolidated with standard specification. |
| 8 | Providing Power Trowel for flooring in Godown and Verandah complying with standard specifications |
| 9 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 10 | For column footings, column pedestals, plinth beams, grade beams,etc |
| 11 | For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. |
| 12 | For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc |
| 13 | Reinforcement Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 14 | Foundation & Basement |
| 15 | Above Basement upto 4.50m heightt |
| 16 | Above 4.50m height |
| 17 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 18 | Brick work in following Cement Mortar 1:5 (one of cement and five of M.Sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9\\" x 4-3/8\\" x 2-3/4\\" including curing, etc., complete complying with standard specifiction. |
| 19 | Foundation & Basement |
| 20 | Above Basement upto 4.50m height |
| 21 | Above 4.5m height |
| 22 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 23 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 24 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (Exterior/ Interior) of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 25 | Supplying and fixing in position air inlet windows of size 1.20M x 0.60M with 75mm x 85mm country wood frame and protected with grills made up of 12mm square M.S. bars welded to form squares at 8 cm centres fixed in the middle and providing with weld mesh 25mm x 25mm, 10 gauge on the outside and provided with four long glazed shutters 38mm thick frame with 75mm x 38mm using 14 or classes including 50mm x 6mm x 250mm long M.S. holdfasts 2 Nos. 4 Nos. oxidized steel tower – bolts 10mm long, 8 Nos. oxidized steel hinges 75mm and screws including one coat of redoxide primer etc., complete. |
| 26 | Manufacturing and supplying and fixing in position of 'Z' type ventilators of 1.50m x 0.60m size made out of 45x45x6mm MS \\"L\\" angles frames alround the ventilator. MS Flat of 25x5 mm to be fixed in between the frames at 30 cm intervals. Hold fast to be used \\"L\\" angle 23 cm length 4 Nos. 3 mm pin headed glass to be fixed in-between the angles by using Teak wood beadings of size 15x12 mm with screw, washer and nut wherever necessary. In the inclined portion, 1\\"x1\\" weld mesh to be embedded by using 25x5 mm Flat at 30 cm centre to centre. 12 mm sq. steel rods to be fixed horizontally between the frames in vertical portions at 10 cm centre to centre (approximately). The rate inclusive of transporting charge, dismantling, redoing to the original condition, one coat of red oxide primer etc., complete complying with standard specification and as directed by the departmental officers. |
| 27 | Supplying fixing pull and push type rolling shutters made only of 18G x 7.5cm old rolled mild steel laths in one piece for full width of convex corrugation complete with presses side Guides of one piece and bottom rails with interlocking arrangements for the steel laths by means of door suspension shaft made to extra strong with high tensile coil type in best workmanship. The shutter is to be supplied with top cover for a clear opening of 1.83 M x 2.60M. Each rolling shutter should be provided with quality ball bearing 2 Nos. per R.S. including one coat of red oxide primer etc.., complete. |
| 28 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 29 | Supplying fabricating, hoisting and erection of ROOF TRUSSES PURLINS AND WIND BRACING with structural steel member like angle and channel iron and M.S plates for all truss, pulin members including all cutting drilling holes, and welding and fixing of member with necessary bolts and nuts, of approved quality and hoisting, aligning and placing the trusses in position etc., complete the trusses will be manufactured as per the detailed plan. The rate should include the cost of painting with two coats of best quality of aluminium paint over one coat of red oxide primer. |
| 30 | Providing and fixing colour coated galvalume profile sheets (Make- TATA/JSW) with the depth of 30 mm and pitch of corrugation 200 mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.47 mm (TCT) total coated thickness (tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 GSM (both side inclusive) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheet should be supplied in single length as shown in drawing or as desired by Engineer in charge and shall be fixed using stainless steel Hex cap headed self drilling/ tapping stainless steel screws M6, 65 mm long with 3 mm thick EPDM seal and Stainless steel stitching screw of size 19x2.5 mm excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. All screw should be sealed with silicon sealant. |
| 31 | Supplying and fixing corrugated PolyCarbonate Sheet of 6mm thick with size 3mx1.06m on the roof in between the colour coated Galvolume sheets for proper lighting with necessary screws and EPDM rubber washers, etc. as complete Complying with standard specification and as directed and specified by the departmental officers. |
| 32 | Supplying and fixing in position 100 x 50 x 7.5 mm @ 9.4kg. channel for the face of RAT GUARD EDGING slab with MS bolts 16mm dia 45 cm long at 2m centres forming protection to the loading platform finishing in fllush with the slab with CM 1:3 ( One cement and three sand ) etc., complete including painting the exposed surface of MS channel with one coat of red oxide primer. |
| 33 | Providing expansion joint at 5mtr intervals across the platform by cutting 6mm wide and full depth of concrete by contractors own mechanical means and filling the gap with polysulphide sealent and adding admixtures recron 3s for crack free construction at the rate of 125gms pack per 50kg of cement with all lead, lift and other incidental works etc., Complete and as directed by Engineer-incharge. |
| 34 | Electrical Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for light point / fan point (for electronic regulator) |
| 35 | Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour |
| 36 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour |
| 37 | Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet |
| 38 | Supply and fixing of 3Ø 63A fabricated enclosure MCB Double door DB box of 600 x 800 x 300 with Lock & Key arrangements fixed in a suitable angle iron frame contains 3 Nos 63A 500V Fuse carriers with Netural link, 1No 63A TPN switch disconnector Fuse units in sheet steel enclosure with HRC Fuses Double break (Front Handle) and 3Nos 63A Phase selector of 1 Pole 3 Way with OFF with Indicator at incoming, 4Nos 32A DP MCB, 1No of 32A FP MCB, Neutral link, Earth link as outgoing. The panel with one coat of primary and 2 coat of enameled paint accompany with Wooden plank, interconnected with 7/20 PVC copper wire, 25x3mm copper flat with earth connections etc complete. |
| 39 | Supply and fixing of 1Ø 32 A incoming enclosure MCB DB boxand outgoing 16Amp Fabricated DB enclosure box of size 600 x 400 x 200 mm with door, Lock & key conisiting of Single Phase Energy Meter, 1No 32A DP Isolator , 7Nos 16A DP MCB, Neutral link, Earth link fixed in suitable Angle iron frame work interconnection with one coat of primary and 2 coat of enameled paint, 2.5 sq.mm PVC Copper wire and earth connection etc. complete. |
| 40 | Earthing as per the ISI specification with an earth electrode of 2.1Mtr class ‘B’ GI pipe of dia not less than 40mm, with copper plate of size 125mm×50mm×6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 41 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 42 | Supply and clamping of 3½×25 Sq.mm PVC LTUG cable on wall or on post with MS clamps. |
| 43 | Supply and laying of 3½×25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 44 | Supply and clamping of 2x16 Sq.mm PVC LTUG cable on wall or on post with MS clamps. |
| 45 | Supply and laying of 2x16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 46 | Supply and laying of 65mm dai GI Pipe for Road Crossing for proctection of UG Cable |
| 47 | Supply and fixing of brass cable gland for 3½×25 sq.mm PVC armoured LTUG cable with earth connection |
| 48 | Supply and fixing of brass cable gland for 2 x 16 sq.mm PVC armoured LTUG cable with earth connection |
| 49 | Supply and providing cable end termination of3½×25 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. |
| 50 | Supply and fixing of single Box type 4 feet 20W LED Tube light fitting complete with TW round blocks on wall or ceiling with LED tube light with PVC unsheathed Copper leads to the fitting. (Phillips/ Crompton/ Havels) |
| 51 | supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . |
| 52 | Sub total |
| 53 | GST in 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender