Tender For Kharika 2Nd Ward Vrandavan Awas Vikas Colony Near Community Centre/Water Tank Near Sector-5 Park No P-9 Providing Footpath Interlocking And Austerity Facilities All Around The Park
Tender Value
15.73 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
2 days left
EMD
78700
Bank guarantee accepted
Document Fee
1475
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Kharika 2Nd Ward Vrandavan Awas Vikas Colony Near Community Centre/Water Tank Near Sector-5 Park No P-9 Providing Footpath Interlocking And Austerity Facilities All Around The Park
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 3 | Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. (SI No. 504) (Sanction Rate) |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting and propping and removal of items for: Foundations, footings, base of columns, etc DSR 2023/5.9.1 |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand) |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :, Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 11 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:, New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 12 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge., 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 13 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause-401 (Sanction Rate) |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 15 | CHEST PRESS DIMENSIONS: PRODUCT AREA:3.6 FT X 2.8 FT SAFE PLAY AREA :7.6 FT X 6.8 FT FUNCTIONS: STRENGTHENS GLUTES, CHEST, SHOULDER. UPPER & MID ABS, FORE ARM & TRICEPS TECHNICAL SPECIFICATIONS: CENTER FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME: 40 NB & 32 NB GI B-CLASS PIPE JINDAL MAKE HANDLE FRAME: 32 NB & 25 NB GI B-CLASS PIPE-JINDAL MAKE CONNECTING PIPE: 32 NB & 25 NB & 40 NB GI B-CLASS PIPE- JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 |
| 16 | \\"PROVIDING AND FIXING OF SHOULDER PRESS FUNPLAY FNF 005 HAVING DIMENSION: • PRODUCT AREA :3.6 FT X 2.3 FT • SAFE PLAY AREA :7.6 FT X 6.4 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS UPPER BACK, SHOULDER, BICEPS & CORE TECHNICAL SPECIFICATIONS: CENTRE PIPE : 100 NB GI C-CLASS PIPE- JINDAL MAKE SEAT FRAME : 32 NB GI B-CLASS PIPE- JINDAL MAKE MAIN FRAME : 40 NB GI B-CLASS PIPE- JINDAL MAKE HANDLE FRAME: 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\"\\" X 1.5\\"\\". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN :SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached\\" |
| 17 | \\"PROVIDING AND FIXING OF STEP TRAINER FUNPLAY FNF 007 HAVING DIMENSION: • PRODUCT AREA : 5 FT X 2 FT • SAFE PLAY AREA :9 FT X 6 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHEN LEG MUSCLES, INCREASE CARDIO VASCULAR ENDURANCE, & IMPROVES REFLEXES TECHNICAL SPECIFICATIONS: SAFE AREA : 2.5 M X 1.6 M MAIN FRAME : 100 NB G.I.C- CLASS PIPES -JINDAL MAKE FOOT REST PIPE : 40 NB G.I. B CLASS PIPE JINDAL MAKE FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\"\\" X 1.5\\"\\". HANDLE : 40 NB & 25 NB GI B CLASS PIPE JINDAL MAKE HANDLE COVER: NEOPRENE RUBBER. BEARINGS : REPUTED MAKE (FAG/SKF) PIPE CAP: GALVANISED CAP. NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached |
| 18 | \\"PROVIDING AND FIXING OF FUN ROWER FUNPLAY FNF 003 HAVING DIMENSION: • PRODUCT AREA : 4.7 FT X 2.5 FT • SAFE PLAY AREA : 8.7 FT X 6.5 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS BACK MUSCLES, SHOULDER ARM MUSCLES AND ABDOMEN, ALSO IMPROVES CARDIO VASCULAR ENDURANCE. TECHNICAL SPECIFICATIONS: MAIN FRAME: 80 NB GI B-CLASS PIPE JINDAL MAKE SEAT FRAME:50 NB GI B-CLASS PIPE -JINDAL MAKE HANDLE FRAME:32 NB GI B-CLASS PIPE -JINDAL MAKE PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS BEARINGS:PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached |
| 19 | \\"PROVIDING AND FIXING OF LEG PRESS DOUBLE FUNPLAY FNF 006D HAVING DIMENSION: • PRODUCT AREA : 6.6 FT X 1.8 FT • SAFE PLAY AREA : 10.6 FT X 5.8 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS LEG MUSCLES TECHNICAL SPECIFICATIONS: CENTRE PIPE: 100 NB GI C-CLASS PIPE -JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\"\\" X 1.5\\"\\". FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\"\\" X 1.5\\"\\". PIPE CAP:GALVANISED CAPS BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN:SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) STOPPER: PU ROD. 50MM DIA. NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached |
| 20 | 'Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 22 | Supplying and Fixing of Fun Walker Single excercise equipment (Model No. PGOFT 06, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 23 | CYCLE DIMENSION: PRODUCT AREA: 3.2 FT X 2.2 FT SAFE PLAY AREA:7.2 FT X 6.2 FT FUNCTIONS: STRENGTHEN UPPER & LOWER LIMB, IMPROVES BODY CONSISTENCY & EGIBILITY, IMPROVE LUNGS & HEART EFFICIENCY AND STRENGTHENS HEART. TECHNICAL SPECIFICATIONS: MAIN FRAME: 25 NB & 40 NB GI B-CLASS PIPE -JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE & SEAT: LLDPE STERING IS USED PIPE CAP: GALVANISED CAP. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. |
| 24 | Supplying and Fixing of Abb Trainer - Roto outdoor excercise equipment (Model No. PGOFT 21, Make Arihant/ Kompain/Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 25 | Supplying and Fixing of Fun Rider outdoor excercise equipment (Model No. PGOFT 07 Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. |
| 26 | Supplying and Fixing of Four Seater Merry Go Round Outdoor Playing Equipment Including Necessary Fittings, T&P etc all Complete in Direction of Engineer in Charge. (Model No. FPMR11, Make Fun Play/ Kompain/ Arihant) Rate 50756.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender