Tender For Renovation Work Of Service Road From Km 38.800 To Km 39.500 Of Thekma Rajwaha.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Oct 2026
5 days left
EMD
1.05 Lakhs
Bank guarantee accepted
Document Fee
766
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Azamgarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work Of Service Road From Km 38.800 To Km 39.500 Of Thekma Rajwaha.
BOQ
| Sl. No. | Item Description |
| 1 | W.B.M (Grade-2) Providing, laying, spreading and compacting stone aggregates of specific size (63mm to 45mm) to Water Bound Macadam (G-2) specification including spreading in uniform thickness hand packing. rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming, Stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting 7.50cm thickness to the required density Grading 2 as per Technical Specification Clause 405 and direction of Engineer-in-charge. |
| 2 | Providing and laying brick on edge 7.00 cm. wide on both side of the road with M-150 bricks complete work as per SI. No. 765 |
| 3 | W.B.M (Grade-3) Providing, laying, spreading and compacting stone aggregates of specific size (53mm to 22.4mm) to Water Bound Macadam (G-3) specification including spreading in uniform loose thickness hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, Stone dust to fill-up the interstices of coarse aggregate, watering and compacting 7.50cm thickness to the required density Grading 3 as per Technical Specification Clause 405 and direction of Engineer-in-charge. |
| 4 | Providing and applying Prime Coat with Bitumen Emulsion(SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.85 kg/sqm using mechanical means as per technical specification clause 502 and direction of Engineer-in-charge. |
| 5 | Providing and applying Tack Coat with bitumen VG-10 using bitumen distributor @ 0.275 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503 and direction of Engineer-in-charge. |
| 6 | Providing, laying and rolling of open graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 (13.2mm & 11.20mm in 2:1) mm aggregates @0.27cum per 10 sqm either using penetration grade bitumen VG-10 @1.46kg per sqm to required line, grade and level to serve as wearing course on a previously prepared base, with paver finisher including mixing in a Hot Mix Plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by as per Technical Specification Clause 508 and direction of Engineer-in-charge. |
| 7 | Seal Coat Type - C Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C seal coat with bitumin (S-90) @ 6.50 kg/10 sqm as per Technical Specification Clause 510 and direction of Engineer - in - charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender