Tender For Procurement And Installation Of Aluminium Partitions And Pvc Ceiling For Improvement Of Sheep And Goat Clinic, Nowshera.(Adv. Cost Rs. 5.98 Lacs) (Incl Cost Of Material+Gst)
Tender Value
5.98 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
6 days left
EMD
11960
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Procurement And Installation Of Aluminium Partitions And Pvc Ceiling For Improvement Of Sheep And Goat Clinic, Nowshera.(Adv. Cost Rs. 5.98 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto 50meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 3 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 4 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 5 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand 20mm nominal size crushed stone agg.) |
| 6 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 8 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Ordinary cement without any pigment. |
| 9 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 10 | Structural steel welded in built up sections trusses and framed work incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete |
| 11 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 12 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 13 | Providing and fixing PP Based soil, waste and vent pipes (Silencio as per DIN4109) suitable to rubber ring joints, which includes bends, rubber ring, jointing, junctions, clean out plug, cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self-cleansing design .etc. complete including jointing. For Under Ground Sewage System in the Existing Excavated Trench of approved/standard Makes to be certified by the Engineer in charge 110 mm dia. PPSWR socketed pipe with rubber ring joint s. |
| 14 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion . Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) |
| 15 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 16 | P/F ACP 3mm multi colored (fire retardant) in partitions ceilings, shutters etc incld cost of rubber, neoprene gasket, taping , water proof silicon sealant or as required at site complete job as per EIC |
| 17 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 18 | Providing and fixing aluminum casement windows fastner of required length for aluminum windows with necessary screws etc. Complete Powder coated minimum thickness 50 micro aluminum |
| 19 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 75 mm |
| 20 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD(SDR-7.4) |
| 21 | Electric :p/fixing of conduit pipe of 2mm thick 25 mm as per requirement and as desired by site incharge |
| 22 | CONCEAL BOX FOR coceal LIGHT of approved brand and manufacture complete jo |
| 23 | DEEP JUNCTION BOX for fan of approved brand and manufacture complete job |
| 24 | p/fixing of FAN point including wiring for FAN point in 1.5mm sq.mm pvc insulated copper wire and 2.5MMmm sq pvc INCLUDING InsulatATION OF 1200MM/CIELING FAN/225MM EXHAUST FAN multistrand copper wire for FAN POINT WITH 350 WATT FAN DIMMER sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends junction boxes etc, 10 Amp S.pole 32 MCB, 10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE (divisional office building) |
| 25 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction ofEngineer-in-charge |
| 26 | /F of exhaust fan of approved brand havels or equivalent with all necessary fixtures(wiring.mcb) as directed by EIC incl. shutter complete job.300 mm dia |
| 27 | P/F of HEATING point including wiring for HEATING point in 2.5mm sq.mm pvc insulated copper wire and 4MMmm sq pvc insulated multistrand copper wire for HEATING POINT sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends junction boxes etc, 10 Amp S.pole 32 MCB, 10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE |
| 28 | p/fixing of lighting point including wiring for lighing point in 1.5mm sq.mm pvc insulated copper wire and 2.5mm sq pvc insulated multistrand copper wire for lightingsub mains 6 amp one way switch.2mm thick pvc conduit/channael with bends junction boxes etc,6Amp S.pole MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCB AND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender