Supply Of AUSTENITIC STEEL COIL 1.7X1100MM

Sharing tender

Supply Of austenitic steel coil 1.7x1100mm , austenitic steel coil 1.7x1100mm., as per drawing: rdso spec. no. c-k201, grad e x5crni1810 (304) table 1&2, heat treatment condition 2b as per table-5., packing instructio n: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic stee l) coils. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest min imum: i) coil should be wrapped with a layer of water proof paper through out whole l ength. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered wi th card board sheet. v) after this whole coil should be wrapped with biodegradeable p lastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edge of the coil should be wrapped wi th gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coi l should be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil f orm for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of c oil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness b elow 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) th e sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/ plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plast ic sheet of suitable thickness. a metal protection in edges should also be provided. ii) a ll bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packi ng under neath) to facilitate handling. mechanical damange & corrosion during transi t if any shall be at the cost of supplier. , proction procedure: covered in pi, quality plan: n.a. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]