Tender For Comprehensive Maintenance To Otm And Md Accommodation In Pocket A & B At Basoli And Janglot Under Ge Basoli
Tender Value
60 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
24 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance To Otm And Md Accommodation In Pocket A & B At Basoli And Janglot Under Ge Basoli
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of ceiling asbestos cement board any thickness including cover fillites. |
| 2 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and directed . |
| 3 | S & F Hollow Profile PVC ceiling consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site Incl aluminium Frame, all complete and as specified. |
| 4 | Demolition of Wall boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets. |
| 5 | S & F solid PVC wall lining consisting of 5 mm thick plain colour PVC shhet inclusive of solvent cement and fixing at site on PVC frame as per spd and directed. |
| 6 | S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling insclusive of fixing on to wall to make PVC frame as per spd and directed. |
| 7 | S&F Hollow Profile PVC Wall Lining consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site, all complete and as specified. |
| 8 | M&L for cutting, grinding & polishing over terrazzo, marble/ kota stone flooring/ skirting/ dado etc., complete all as specified and directed. |
| 9 | Dismantling Stone/Kota slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and directed.. |
| 10 | M&L Granite black colour of any type 18 to 20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 11 | Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc complete all as specified and directed. |
| 12 | S&F PVC board 18-20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, weight not less than 10.50 Kg/Sqm Incl magnetic catches, Piano Hinges for kitchen cabinet doors including taking down old UNSV Wall/PVC boards of any thickness including cover and fillets complete all as specified and directed. |
| 13 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm Complete all as specified and directed. |
| 14 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each Complete all as specified and directed. |
| 15 | Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm Complete all as specified and directed . |
| 16 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length Complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 17 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter decorative type, of 30 mm size comprising of virgin polymer of K value 58-60 ,calcium carbonate and natural fibre and non toxic additives minimum compressive strenth 50 N/ mm2 ,modulas of elasticity 850 n/ mm2 and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall, complete all as specified and directed. |
| 18 | M&L For 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm complete all as specified and directed. |
| 19 | M&L For 1.25mm thick Pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm complete all as specified and directed. |
| 20 | M&L For PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats complete all as specified and directed. |
| 21 | S&F Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a). |
| 22 | S&F Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated . |
| 23 | S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and as directed. |
| 24 | S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed. |
| 25 | S&F powder Coating aluminium single or double leaf door shutter in single or two panels with standered aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make complete all as specified and directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.) |
| 26 | S&F powder coating aluminium window and ventilator shutters, side hung type without sash bars, with one side Glass shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges 2 Nos, suitable handle 2 Nos, tower bolt 2 Nos in each shutter Incl 5mm thick Glass Complete all as specified and directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.) |
| 27 | S&F For Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with one side Glass shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges 2 Nos, suitable handle 2 Nos, tower bolt 2 Nos in Each Shutter Incl 5mm thick Glass Complete all as specified and directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.) |
| 28 | S&F aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg . complete all as specified and directed. |
| 29 | M&L 12mm thick Toughned glass doors, automatic doors and similar work with SS mortice 65 mm 4 levers lock and alongwith stainless steel 2 nos handles of size 450 mm a including cutting to shape, drilling holes etc complete all as specified and directed. (Note : Design of glass as approved by Garrison Engineer) |
| 30 | Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 31 | S&F framed work such as grills, gratings etc with ends of bars souldered reveted or forged into spike framed guard bars , iron doors , gate including accessories like handles pintle hinges,sliding bolt, stops etc welded complete and similar work confirming to Fe 290 Gde E-165 |
| 32 | M&L For Painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint.complete all as specified and directed. |
| 33 | M&L for preparation of old decorated surfaces of wood work exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 34 | M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise describe applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.. |
| 35 | M&L for preparation of old decorated steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | S&F Sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sq m in each pane all complete and as specified. |
| 37 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed |
| 38 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed. |
| 39 | S&F Figured glass 3mm thick , pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed. |
| 40 | S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed by Engineer-in-Charge |
| 41 | S&F For MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 42 | Supply and fixing stainless steel handles 150mm, fixed complete all as specified and as directed. |
| 43 | Supply and fixing stainless steel barrel tower bolts size 150mm of extruded section and fixed complete all as specified and as directed. |
| 44 | Supply and fixing for stainless steel butt hinges, 100mm, complete all as specified and as directed. |
| 45 | S&F aluminium alloy , anodised ,sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and as directed. |
| 46 | S&F aluminium handle ,cast type, anodised ,75mm size. complete all as specified and directed. |
| 47 | S&F floor stopper 150mm length of aluminium alloy body and tongue, anodised, wth hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 48 | Supply & fixing 100mm hasp and staple aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and as directed. |
| 49 | Supply & fixing stainless steel peg set of six hooks fixed on patti of size 50cm to 60cm, complete all as specified and as directed. |
| 50 | S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink complete all as specified and directed. |
| 51 | S&F in repair Sinks made of stainless steel 1 mm thick kitchen with plugs ,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 495mm X 420 mm bowl size 410mm X 330mm X 160 mm all complete (sink to be fixed in granite after cutting the granite stone to required shape ) complete all as specified and directed. |
| 52 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 53 | Supply and fixing in Repair Kitchen stainless steel plate rack made out of 0.90mm thick sheet and having partitions as per sample. The over all size (60x60x22cm) fixed with steel fastners or steel screw complete all as specified and as directed. |
| 54 | S&F in Repair Stainless Steel Kitchen Sink with double bowl of overall size 1120mm x 460mm bowl size 410mm x 330mm x 160mm,1mm thickness with plug washers,and waste pipes, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and connecting union to pipe complete all as specified and directed. |
| 55 | Supply and fixing in repair 15mm bore CP fancy type long body bib taps with flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed. |
| 56 | Supply and fixing in repair angle valve / stop valve with wall flange, cast copper alloy, cast copper alloy, stop valve screwed for 15 mm iron pipe, complete all as specified and as directed |
| 57 | S&F in repair 15mm stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type complete all as specified and as directed. |
| 58 | S&F in repairs chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking includinf making connections and fixed in position complete all as specified and as directed |
| 59 | S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and as directed |
| 60 | S&F in repairs 125mm size brass chromium plated shower rose with swivel joints complete all as specified and as directed |
| 61 | S&F Fancy type Brass Chromium plated, soap dish, complete all as specified and as directed |
| 62 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm. |
| 63 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 64 | S&F in Repair 600mmx450mm beveled edge mirror of selected quality mounted on 6mm thick plywood with fancy frame of wooden of any size complete all as specified and directed |
| 65 | S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed |
| 66 | S&F in repair PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 67 | S&F in repair Vitreous china wash basin white , flat back size 550 x 400mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and directed. |
| 68 | S&F in repair brass CP mixer for mixing hot and cold water screwed down for iron pipe, 15 mm bore, complete all as specified and directed |
| 69 | S&F in repairs CP wall mixer with Hand Shower arrangement with crutch (chrome) of 15 mm bore complete all as specified and directed. |
| 70 | S&F For in repair 15mm CP center hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 71 | S&F Bathroom Cabinet with mirror plastic strong and heavy rich look 6 selves storage organiser of size 450 x 300 mm all as specified and directed. |
| 72 | S&F grating doom 100mm dia of PTMT (Minimum weight 25gms) of complete all as specified and as directed. |
| 73 | S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) of complete all as specified and as directed. |
| 74 | S&Fin repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 75 | S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed. |
| 76 | Refixing of old steel tubing and connections is in now or old positions (walls ceiling floors etc) bore of pipe 15mm and taking up or down steel water tubing and connection complete all as specified and directed. |
| 77 | S&F steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor etc and taking up or down steel water tubing and connection complete all as specified and directed. |
| 78 | Refixing of old steel tubing and connections is in now or old positions (walls ceiling floors etc) bore of pipe 20mm and taking up or down steel water tubing and connection complete all as specified and directed. |
| 79 | Supplying and laying of outer dia 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 80 | M&L for rendering 15 mm thick plaster in cement sand mortar 1:4 mixed with water proofing compound as approved as per manufacturer instruction, shall be applied both on floor and side walls. (a) The surface shall be cured and allowed to dry, all the joints of pipe shall be sealed properly as per instruction of agency who is carrying out water proofing treatment.(b) Applying a layer of modified membrane over a coat of oil bound bitumen primer@ 0.30 liter/Sqm on floor as well as on side wall as per manufacturer's instruction of make / manufaturer as in specified in zonal specification Part-II,After the treatment is over sunkun portion shall be kept full of water for atleast one weak to check that no seepage is seen from the external surfaces complete all as specified and directed. |
| 81 | S&F in repairs rotational moulded PVC water storage tank 1000 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC float valve 20 mm, all as specified in SSR Part-Icomplete all as specified and directed.Note :- Specific Weight of PVC Tank should not less then 25gm/ltr. |
| 82 | S&F in repairs rotational moulded PVC water storage tank 500 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC float valve 20 mm, all as specified in SSR Part-I complete all as specified and directed. Note :- Specific Weight of PVC Tank should not less then 25gm/ltr. |
| 83 | S&F in repair Vitreous china urinal Flat Back Half stall type (white) of Size 375x390x590mm minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe. |
| 84 | S&F in repair vitreous china urinal partition white of size 310 x 700mm. |
| 85 | S&F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 15mm bore of pipe all as specified & directed. |
| 86 | S&F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 20mm bore of pipe all as specified & directed. |
| 87 | S&F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 25mm bore of pipe all as specified & directed. |
| 88 | S&F in repair 20mm dia Stainless steel Curtain Rod with Brackets & Finials etc, Complete all as specified and directed. |
| 89 | S&F in repairs flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed. |
| 90 | Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia complete all as specified and directed. |
| 91 | S&F in repairs wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed. |
| 92 | S&F in repairs EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed. |
| 93 | Taking down cement or cement lime plaster any description including racking out joints hacking for key, scrubbing down with water etc. |
| 94 | M & L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces of walls,finished even and smooth without using extra cement complete all as specified and directed. |
| 95 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete incl taking down cement plaster on brick or stone walls or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with, water etc complete all as specified and directed.Note : Liquid WPC will be measured and paid separately.. |
| 96 | M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete as specified and directed. |
| 97 | M&L for two coats of oil bond distemper over a coat of primer on new platered surfaces of wall including pillars any description including preparation of surfaces etc over 2mm thick wall care putty coat complete as specified and directed. |
| 98 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of old plastered surfaces and applying two coats of oil bond distemper of approved tint on walls over 2mm thick wall care putty coat complete as specified and directed. |
| 99 | M&L for complete removal of existing treatment including and preparation of old plastered surfaces and applying two coats of plastic emulsion paint including alkali resisting priming over 2mm thick walls all as specified & directed. |
| 100 | M&L for preparation of new plastered surfaces and applying two coats of plastic emulsion paint including alkali resisting priming over 2mm thick on walls all as specified & directed. |
| 101 | M&L for preparation of new plastered surfaces of external walls of any description and applying two coats of apex weatherproof exterior emulsion of required shade complete as specified and directed. |
| 102 | M&L for complete removal of existing treatment including and preparation of old plastered surfaces of external walls of any description and applying two coats of apex weatherproof exterior emulsion of required shade complete as specified and directed. |
| 103 | M&L For Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified. |
| 104 | M&L For Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified. |
| 105 | M&L for preparation of old decorated surfaces of wall, plasters & cornices including brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying one coat of cement based paint complete all as specified and directed. |
| 106 | M&L preparing new plastered surfaces & applying two coat of distemper oil emulsion over alkali resistant priming paint on ceiling complete all as specified. |
| 107 | M&L Complete removal of existing treatment and applying two coat of distemper oil emulsion on old plastered surface of ceiling complete all as specified. |
| 108 | Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering all as specified and directed. |
| 109 | M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 110 | S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 111 | Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position |
| 112 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A |
| 113 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls. |
| 114 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls. |
| 115 | S&F PVC SWR Bends in any radius 110 mm bore with access door in repair. |
| 116 | S&F PVC SWR Bends in any radius 75 mm bore with access door in repair. |
| 117 | S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement. |
| 118 | S&F in repairs for 110mm dia bore PVC SWR branch piece single (Double Y) equal or unequal . |
| 119 | S&F in repairs for 75mm dia bore PVC SWR branch piece single (Double Y) equal or unequal |
| 120 | S&F PVC (SWR) Vent cowl 110 mm bore in repair. |
| 121 | Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the ward \\"CLEANED ON WITH DATE\\" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified. |
| 122 | Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word\\" CLEANED ON WITH DATE' with while paint including replacement of broken/unserviceable fitting such as Elbow, Tee, socket, nipple of any size etc complete all as specified. |
| 123 | Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor .Complete all as specified and directed. |
| 124 | M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) , all complete and as specified. |
| 125 | M&L liquid water proofing treatment to RCC roof slab including dismantling of existing roof treatment of any description such as worn-out tar felt, debris, mortar of any description & any thickness, (a) Prepare the surface by cleaning and making it free from dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated, thereafter, inspection for cracks on the surface caused by thermal expansion, contraction Cutting the grooves with suitable cutter machine in \\"V\\" groove filled with Repair mortar/micro concrete/General purpose grout as recommended proportionally as per recommendation of manufacturer. making of Gollas at all the corners with Polymer modified mortar (1:4 Cement: sand with acrylic polymer 3.5% by weight of cement) complete all as specified.(b) Laying 10mm thick rendering in Cement mortar 1:3 with liquid water proofing compound (as per manufacturer's instructions) on fair faces of concrete roof surfaces, finished even and fair to receive treatment on roof Complete. (c) Supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications.(i) Elongation of range 400% to 600%(ii) Tensile strength of 8-12 N/mm2.(iii) Crack bridging ability of 3.00-4.00mm. (iv) Hardness (Shore 'A' ASTM D2240) of range 50-70.The application shall include epoxy primer application in ratio 1:1 (resin hardener) with 100% water dilution and laying of fiber mesh 1.5 mm thick weave in leno pattern laying weight 4.5gm/Sqm and plastering it properly with overlap of 50 mm, and allowing it to dry before application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. |
| 126 | Note:-(i) The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free From leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose(ii) Work to be carried out by authorized applicator and as per manufacturer's instructions.(iii) Ponding test will be done with filling of water for continuous 48 hours if there is any leakage than entire treatment will be done again by contractor without any cost. (iv) The rate includes for filling cracks in existing roof with epoxy cement mortar using suitable bonding agent before laying cement plaster. (v) Material shall be purchased directly from the Company's Authorised Dealer only.(vi) The contractor shall submit a valid Memorandum of Understanding (MoU) executed with any one of the approved brands. |
| 127 | M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg), top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed. |
| 128 | M&L For 15mm thick screed in CM 1:4 mixed with liquid waterproofing compound in at Roof Top Surfaces for smoothening surface of laying APP Membrane and all as specified and as directed. |
| 129 | M&L For Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane of any description, over 10cm in width or girth,not otherwise described. |
| 130 | Supply only Liquid Water Proofing Compound. |
| 131 | M&L Reinforced cement concrete 1:2:4 type B-1,using 20 mm graded stone aggregate as in shelves etc including form work and demolition of existing reinforced cement concrete of any description and any position complete all as specified and directed.. |
| 132 | M&L For TMT Steel bars 8 mm dia cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips . |
| 133 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6) including dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises, etc complete all as specified and directed. |
| 134 | S&F in repairs One piece EWC S Concealed with Premium plastic seat Cover and twin Flush fittings, etc complete all as specified and directed. |
| 135 | Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 136 | M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded agg) in plinth protection etc.laid in alternate bays all complete and as specified. |
| 137 | M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded agg) as in sub base. |
| 138 | M&L PCC 1:2:4 type B1 (20mm graded stone aggregate) , 25 mm thick as in sub top layer of floor and finished rough to receive the floor tiles. |
| 139 | M&L Chequered Cement Concrete tiles 25cmX25cmX22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement & pigment in floor including 20 mm thick screed bed or beding layer in CM (1:4 )in laying fioor finishes complete all as specified and directed. |
| 140 | M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 141 | Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed. |
| 142 | M&L for 10mm thick light shade vitrified ceramic tiles in floors not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed in CM 1:6 to match shade, pattern, laying etc of tiles complete all as specified & directed. |
| 143 | M&L for 10mm thick light shade vitrified ceramic tiles on vertical surfaces such as skirtings, dados and risers to steps etc. not exceeding 0.36 sqm set & jointed in neat cement slurry including rendering 10 mm thick CM 1:4 and pointed in coloured cement of cement mortar 1:4 to match shade, pattern, laying etc of tiles complete all as specified & directed. |
| 144 | S&F Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed. |
| 145 | M&L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n . Exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 146 | Material and labour glazed ceramic coloured tiles in vertical surface 450mmx300mmx7mm thick, set and jointed in neat cement slurry and pointed white or coloured cement to match the surface over and including 10mm thick CM 1:4 Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed . |
| 147 | M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. |
| 148 | M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed. |
| 149 | S&F in repair Vitreous China, Counter top Hand wash basin size (550x400) mm complete with Single lever tall body with 150 mm Extention Body Basin Mixer without Popup Waste System with 600 mm Long Braided Hoses with 32mm CP waste coupling and water pipe necessary bracket supports,cutting of granite counter sealing around besin Complete all as specified and as directed. |
| 150 | Notes : The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender