Tender For Provision Of 01 Guard Room And 01 Visitor Room At 02 Acres Land At Icgs Gandhinagar Under Ge(I) (Cg) Gandhinagar
Tender Value
20.16 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
16 days left
EMD
40500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of 01 Guard Room And 01 Visitor Room At 02 Acres Land At Icgs Gandhinagar Under Ge(I) (Cg) Gandhinagar
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep in loose soil complete all as specified and directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, and getting out in all kind of soil complete all as specified and directed. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift from 1.5m to 3.0m, and getting out in all kind of soil complete all as specified and directed. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m getting out in all Kind of soil complete all as specified and directed. |
| 5 | Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface (Floor), complete all as specified and directed. |
| 6 | Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed. |
| 7 | Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed. |
| 8 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed. |
| 9 | M & L PCC (1:2:4) type B2 for Footing and plinth beam, complete all as specified and directed. |
| 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/Loose soil complete all as specified and directed. |
| 11 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in Soft/Loose soil, complete all as specified and directed. |
| 12 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for foundation including raft, footing as Mass Concrete, complete all as specified and directed. |
| 13 | Use & Waste formwork for rough finished surfaces of concrete measured flat for Footing, complete all as specified and directed. |
| 14 | M & L Mild steel TMT(CRS) bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 15 | All as per item here-in-above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,all as specified and directed by Egr-in-Charge. |
| 16 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for Column (Upto Plinth Top), complete all as specified and directed. |
| 17 | Use & Waste formwork for rough finished surfaces of concrete measured flat for Column finished fair flat surfaces (Upto Plinth Top), complete all as specified and directed. |
| 18 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in (1:6), Complete.,all as specified and directed. |
| 19 | M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4), Complete.,all as specified and directed. |
| 20 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for Lintel Band, roof Slab Beam complete all as specified and directed. |
| 21 | Use & Waste formwork for rough finished surfaces of concrete measured flat for Lintel Band, roof Slab Beam complete all as specified and directed. |
| 22 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for GF chajja., complete all as specified and directed. |
| 23 | Use & Waste formwork for rough finished surfaces of concrete measured flat for GF chajja.,complete all as specified and directed. |
| 24 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for roof slab,complete all as specified and directed. |
| 25 | Use & Waste formwork for fair finished surfaces of concrete measured roof slab, complete all as specified and directed. |
| 26 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for facia, Parapet Wall,complete all as specified and directed. |
| 27 | Use & Waste Form work for rough finished surfaces of concrete measured flat for facia, Parapet Wall complete all as specified and directed. |
| 28 | M & L 12mm thick cement plaster in C.M (1:6) internal finished even & smooth with wall , acomplete all as specified and directed. |
| 29 | M & L 15mm thick outside plaster- 10mm thick first coat (1:6) & 5mm thick second coat (1:4), complete all as specified and directed. |
| 30 | Supply Only water proofing compund (WPC), complete all as specified and directed. |
| 31 | S & F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 32 | M & L 35mm thick Flush shutters, particle board core construction, with block board core and plywood face panels, commercial type on both sides. And covered with decorative face veneer withlipping/frame to match on both side,complete all as specified and directed. |
| 33 | S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified, complete all as specified and directed. |
| 34 | S & F 6.0 mm thick Toughened glass, ordinary quality, Frosted and glazing with oil putty in square exc 0.5 sq. m in each pane (For Windows), complete all as specified and directed. |
| 35 | S & F 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 36 | S & F Wire netting of stainless steel wire 0.71mm dia and size of mesh 12mm fixed with tinned tacks of stainless steel wire staples, complete all as specified and directed. |
| 37 | S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as specified by the manufacturer, complete all as specified and directed. |
| 38 | S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing., complete as specified by the manufacturer ,complete all as specified and directed. |
| 39 | S & F 100mm long Butt hinges, heavy weight, cold rolled mild steel, complete all as specified and directed. |
| 40 | S & F 200 mm long 10 mm dia aluminum anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 41 | 150 mm long Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 42 | S & F 150mm Long, 16mm Dia aluminum aldropbolt, complete all as specified and directed. |
| 43 | S & F MS work such as Bands, Straps, Hold fast, Clamps, Hooks & similar Fe-410-O or Fe-310-O complete all as specified and directed. |
| 44 | M&L Preparing surfaces plastered or unplastered,Priming plastered and other surfaces with alkali resistant priming paint, Two coats of Distemper Oil Emulsion Over a coat Putty surface on Internal surface, complete all as specified and directed. |
| 45 | M & L for Three Coats Of White Wash on Ceiling, complete all as specified and directed. |
| 46 | M & L Two coats of Acrylic emulsion (Exterior Grade) Waterproof Acrylic emulsion Anti Fungal Paint Over One Coat Of Primer including preparation of new surfaces, complete all as specified and directed. |
| 47 | M & L Surfaces of any description, not otherwise described, over 10cm width or girth Two Coats of Synthetic Enamel Paint over a Coat of Pink Primer over prepared surface of Wood, complete all as specified and directed. |
| 48 | M & L Surfaces of any description, over 10cm in width or girth,not otherwise described Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Primer over prepared surface Steel, complete all as specified and directed. |
| 49 | M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 50 | M & L 75mm Thick Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), complete all as specified and directed. |
| 51 | M & L for Mirror polished Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 52 | M & L Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area ofeach tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 53 | M & L 20mm thick Screed bed or bedding layer of mortar in CM (1:4) for laying floor finishes complete all as specified and directed. |
| 54 | M & L Non - skid Ceramic colour tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 55 | M & L 15mm thick Screed bed or bedding layer of mortar in CM (1:4) for laying floor finishes, complete all as specified and directed. |
| 56 | M & L Mirror polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in Flooring.,complete all as specified and directed. |
| 57 | M & L Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neatcement slurry and pointed in white or colour cement to match, complete all as specified and directed. |
| 58 | M & L 10mm thick Screed bed or bedding layer of mortar in CM (1:3) for laying floor finishes,and app bedding, complete all as specified and directed. |
| 59 | M & L 75mm thick Plinth Protection PCC (1:3:6) type C2 using 20mm graded aggregate (0.75 m wide), complete all as specified and directed. |
| 60 | M & L APP based polymeric membrane minimum weighing 3.5kg /sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms /sqm) land on primed surface by forced application, complete all as specified and directed. |
| 61 | Supply Only Bituminous Primer all as specified and directed. |
| 62 | M & L for two Coats of Bituminous Aluminium Paint, complete all as specified and directed. |
| 63 | S & F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 litre complete all as specified and directed. |
| 64 | S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern,complete all as specified and directed. |
| 65 | S & F 110 mm PVC (SWR) WC connector bent type, complete all as specified and directed. |
| 66 | S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. |
| 67 | S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 68 | S & F Toilet paper holder, vitreous China,box type fixed to walls with chromium plated(CP) brass screws complete all as specified and directed. |
| 69 | S & F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms), complete all as specified and directed. |
| 70 | S & F Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), complete all as specified and directed. |
| 71 | S & F unplasticised PVC pipes of pressure rating 10 kgf/cSqm fixed complete to walls, ceilings or in Floors etc., any type of pipe 32mm dia, complete all as specified and directed. |
| 72 | S & F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and orcelain stopper but including brackets, complete all as specified and directed. |
| 73 | S & F C.P. Rubber or vulcanite plug (waste) with rings and fitting and fixing but including chromium plated brass or bronzechain and stay (chain n exc 50 cm in length), complete all as specified and directed. |
| 74 | Supply 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup Washers, complete all as specified and directed. |
| 75 | S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden /plastic cleats (Minimum weight 190gms), complete all as specified and directed. |
| 76 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms), complete all as specified and directed. |
| 77 | S & F Exterior type Wall mixer S.S.body with separate arrangement for Supplying hot & cold water to tap & shower, complete all as specified and directed. |
| 78 | S & F Soap dish, vitreous China white, approximate size 160x 160x90mm, complete all as specified and directed. |
| 79 | S & F PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls 110mm, complete all as specified and directed. |
| 80 | S & F PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm, complete all as specified and directed. |
| 81 | S & F PVC (SWR) vent cowl 110mm, complete all as specified and directed. |
| 82 | S & F PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls 75mm, complete all as specified and directed. |
| 83 | M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 84 | S & F PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm, complete all as specified and directed. |
| 85 | S & F PVC (SWR) bends any radius 75mm with access door, complete all as specified and directed. |
| 86 | S & F PVC (SWR) branch piece 75mm single (Double Y) equal or unequal, complete all as specified and directed. |
| 87 | M & L PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm, complete all as specified and directed. |
| 88 | Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required modules for mounting of modular switches, sockets, switch sockets, fan regulators with required modules complete all as specified and directed for the following:-.(a) One light /fan point controlled by one, one way switch. |
| 89 | (b) One 3 pin 6 Amps socket outlet on same board. |
| 90 | ( c) One 3 pin 6 Amps socket outlet on independent board. |
| 91 | M&L for Point wiring complete with 2.5 Sq mm single core PVC insulated but unsheathed multistrand copper conductor FRLS cabeI 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISi marked with wall thickness not less than 1.8 mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured including 2.5 Sq mm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board, including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets with required modules complete all as specified and directed. |
| 92 | Supply & fix modular switch 1 way, 6 Amps, 1 modular (ISI marked) complete all as specified and as directed. |
| 93 | Supply & fix modular switch 1 way, 16 Amps, 1 modular (ISI marked) complete all as specified and directed. |
| 94 | Supply & fix modular socket, 6 Amps, 2/3 pin combind 2 module (ISI marked) complete all as specified and directed. |
| 95 | Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module (ISI marked) complete all as specified and directed. |
| 96 | Supply & fix modular fan regulator, 120 watt, 2 moduler (ISI marked) complete all as specified and directed. |
| 97 | Supply & fix ceiling rose, surface bakelite, 65 x 17 mm three terminals (ISI Marked) complete all as specified and directed. |
| 98 | S & F in of wall mounted LED Tube light fitting 1 x 20W LED (6500K), 4 feet, Sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work, including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting complete all as specified and directed. Make: Wipro - CAT PT No- LL20-281-XXX-65AL1** or equivalent to Bajaj/Havells/Phillips. |
| 99 | S & F in of wall mounted LED Tube light fitting 1 x 10W LED (6500K), 2 feet, Sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work, including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting complete all as specified and directed. Make: Wipro - CAT PT No- LL20-111-XXX-65NE3* or equivalent to Bajaj/Havells/phillips |
| 100 | S & F BEE five star rated BLDC energy efficient high-speed Metalic body ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CFM with service value 6.00BEE, 28W,operating voltage 230V and frequency 50 Hz, including a downroad of suitable size, Electronic regulator and accessories with smart remot control complete all as specified and directed. |
| 101 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 102 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece anchor fasteners of suitable size, Hot & cold flexible connection pipe complete all as specified and directd |
| 103 | M&L for sub main wiring with two single core 2 x 6 Sqmm PVC (FRLS) insulated multistranded flexible copper conductor cable 660/1100 volts grade down in through including Concealed PVC Conduit with all accessories, PVC insulated 1 x 6 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. Note: Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit. |
| 104 | S & F in replacement of MCB DB 8 way SPN, double door, vertical type, IP - 53 with 200 Amps rated bus bar, Concealed and connecting up complete all as specified and directed. |
| 105 | Supply and fixing RCBOs for Earth leakage, overload & short- circuit protection up to 40A current carrying capacity, double pole 30mA earth leakage capacity complete with connection testing and commissioning complete all as specified and directed. |
| 106 | Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32A and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 107 | Supply and fixing earthed metal clad socket outlet with earthed plug top 20 Amps capacity with sheet metal enclosure and one 20 Amps MCB SPN complete all as specified and directed. |
| 108 | Cutting chases, pinning in, making good to facings where required of brick/stone wall and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed. |
| 109 | M &L for replacement for Earthing complete with GI earth plate 60cmx60cmx6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point testing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender