Tender For special Repairs Of Bldg No P-23 & P-24 (Jcos Md Accn) At Malhotra Enclave For 54 Med Regt At Ch Sambhajinagar Cantt
Tender Value
1.12 Crore
Estimated cost
Bid Submission
26 Oct 2026
22 days left
EMD
1.88 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs Of Bldg No P-23 & P-24 (Jcos Md Accn) At Malhotra Enclave For 54 Med Regt At Ch Sambhajinagar Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description on brick, block or stone walls etc (at any height) including racking out joints, hacking for key scrubbing down with water etc complete & removing debris outside MD land as directed. |
| 2 | M&L for rendering 10mm thick on in CM 1:6 fair faces of brick/concrete sufaces surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | M&L for 15mm thick plaster in CM 1:4 (using water proofing liquid as per manufacturers instructions) on other than fair faces of brick work masonary surface or concrete surface finished even and fair without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | Supply only liquid water proofing compound complete, ISI mark all as specified and as directed. |
| 6 | Removing the loose spalled concrete portions from Ceiling,wall ,beams,Chajja surface cleaning thoroughly by making it free of dirt, rust etc. and applying rust removing solution to exposed corroded reinforcement, applying a coat of DR. FIXIT Epoxy Zinc Primer or equivalent to the reinforcement bars, and fixing of wire mesh having 0.90 mm dia and 12 mm aperture with nails, applying 1 coat of bonding agent (DR. FIXIT Pidicrete MPB or equivalent) mixed with cement (ratio 1:1) and finally rendering the surface avg 25 mm thick with DR. FIXIT Polymer Mortar PX or equivalent complete all as specified and as directed.Note: 1. Location shall be verified and approved by the Engineer-in-charge before carrying out the treatment.2. Make of Chemical shall be approved by the GE before start of application. |
| 7 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan, exc 6 m mean redius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed. |
| 8 | M&L for preparation of new plastered internal surfaces of wall and applying two coat of acrylic distemper of required shade and colour complete including one coat of primer as per manufacturer's specifications in any colour complete all as specified and directed. |
| 9 | M&L for newly plastered wall surfaces, preparation of surface and applying applying two coats of 100% premium exterior acrylic emulsion paint (weather coat) alkali & fungal resistance, dirt resistance of required shade over and including priming coat of exterior primer complete all as specified and as directed. |
| 10 | M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed. |
| 12 | M&L for applying 1.5 mm thick of Birla/ JK wall care putty in new or old decorated surfaces of walls and sanding the surfaces till smooth finish is obtained for receiving finishes complete all as specified and as directed |
| 13 | M&L for Preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified . |
| 14 | M&L for Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified . |
| 15 | M&L for preparing of old surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying two coats of acrylic distemper in any colour complete all as specified and as directed. |
| 16 | M&L for complete removal of existing treatment on old decorated plastered suface of external walls & applying two coats of Exterior Acrylic Emulsion paint over one coat of primer including wall crack filler as required complete all as specified & directed by Engr in charge. |
| 17 | M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on old complete all as specified and directed. |
| 18 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and directed. |
| 20 | M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 21 | M & L for Non-skid coloured Ceramic tiles mat finish 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 22 | Ditto all as per itemNo 21 above but as in skirting set and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 23 | M&L for glazed coloured ceramic tiles in vertical surfaces as dado of size 450x300x6-7mm, thick set and jointed in neat cement and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on other than fair faces of brick work etc complete all as specified & as directed.Note: Color, size and shade shall be as approved by Engineer-in-charge |
| 24 | Dismantling kota, granite, cudappa stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed. |
| 25 | M&L for machine cut Kota stone flooring 18 to 22 mm thick (size of kota stone slab 22\\"x22\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 26 | All as per item No. 25 here-in-before but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick cement mortar 1:3 all as specified and as directed.Note : Riser provided to steps shall be in one piece. |
| 27 | M&L for machine cut Kota stone slabs 18 to 22 mm thick as in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed. |
| 28 | M&L for Machine cut cudappah stone slab 20-25 mm thick laid over and incl 20 mm thick bedding layer CM 1:6 incl roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab incl cutting, rubbing and finish polishing complete all as specified and directed. |
| 29 | M & L for 18-20mm thick prepolished Granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/plateform, gate pillars, cills etc or on vertical surfaces including vertical projections, including full round mouldings the edges laid over and over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture of pigments to match the shade of granite and rubbing polishing to achieve mirror finish complete all as specified & directed. Note:- Colour/shade to be decided by Engineer-in-Charge. |
| 30 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 31 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in sub base of floors and pavings all as specified and as directed. |
| 32 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed. |
| 33 | M&L for PCC 25 mm thick (1:2:4) type B-1 using 20 mm graded stone as levelling course in floors aggregate complete all as specified & directed. |
| 34 | M&L for 60mm thick, factory made, chamfered edge, cement concrete interlocking paver blocks (glossy/ rubber matt finish) of M-35 grade with approved colour, design & pattern of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.Note : Size, shape, pattern and shade shall be as approved by Engineer-in-Charge. |
| 35 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required excavation,returning filling and removal of soil complete all as specified and as directed. |
| 36 | Taking down chowkats or frames with shutters(without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed. |
| 37 | Taking down chowkats or frames with shutters(without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed. |
| 38 | Taking down shutters of any description, area exc 1 sqm & n.exc 2 sqm each leaf and complete all as specified & as directed. |
| 39 | S&F pressed steel doors frames of size 125 mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and as directed. |
| 40 | S&F pressed steel doors frames of size 105 mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and as directed. |
| 41 | M & L cement concrete type B-0 1:2:4 (12.5 mm graded agg ) as in bed block ,hold fast, coping and similar work etc complete all as specified and as directed. |
| 42 | S&F 35 mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed. |
| 43 | S&F 35mm thick IInd class hard wood glazed skelton shutters,factory made,open rebated and prepared to recive glass,guage etc,(with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat complete all as specified and as directed. |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges shall be paid separately under respective item. |
| 46 | S&F powder coated anodized aluminium frames for door, window, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.Note:- Colour shall be as approved by GE/Engineer-in-Charge. |
| 47 | S&F in repair powder coated anodised aluminium ventilator having aluminium section weighing 0.55 kg/m, including Sliding louvers,frosted 3mm thick glass,SS wiremesh including arrangement for fixing of exhaust fan and necessay joining cleats,glazing clips,screws etc complete all as specified.Note:- Shade and size to be decided by Engineer-in-Charge. |
| 48 | S & F powder coated aluminum windows, three track, made out of aluminium sections including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a) Window frame: (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m)(b) Shutter: (i) Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note : Shade shall be as approved by Engineer-in-Charge. |
| 49 | S&F in position 4.8 to 5mm thick clear float / frosted glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 50 | S&F in position 4.8 to 5mm thick clear float / frosted glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 51 | S&F mild steel framed work such as grill, gratings, guard bars etc with end of bars shouldered and/or riveted or forged into spikes, ladders, iron frame, balusters, railings, cooler stand and similar works conforming to Fe.290, Gde-E-165 including one shop coat of zinc chrome primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified. |
| 52 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand confirming to Fe-290 (Gde E165) including preparing back of chowkhat and simlar applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 53 | S&F 0.9m to 1.5m bottom door seal brown aluminium frame 38 to 45mm width all as specified and directed. |
| 54 | M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10Cm width or girth complete all as spd & directed. |
| 55 | M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 56 | S&F SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 57 | S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring ,fixed in floor over all length of cover plate 150 mm all as specified and directed. |
| 58 | S&F mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge. |
| 59 | S&F 100 mm long SS butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed. |
| 60 | S&F butt hinges medium weight cold rolled mild steel ISI marked size 100 mm size complete all as specified and directed. |
| 61 | S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed. |
| 62 | S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed. |
| 63 | S&F 100mm size stainless steel handles, for cupboard/ kitchen cabinet complete all as specified and as directed. |
| 64 | S&F for aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and directed. |
| 65 | S&F aluminum anodized barrel tower bolt of extruded section size of bolt 200mm as specified and directed. |
| 66 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed as specified and directed. |
| 67 | Taking up or down 15 mm bore dia GI steel tubing and connections complete all as specified and as directed. |
| 68 | Taking up or down 20 mm bore dia GI steel tubing and connections complete all as specified and as directed. |
| 69 | M&L for 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 70 | M&L for 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 71 | M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc,and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 72 | S&F vitreous china wash hand basin, white flat back of size 550 mm x 400 mm including brackets, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe15mm dia, PVC connection pipe 450mm long complete all as specified and as directed.Make: Cat No. S2040141 of CERA or equivalent model of makes specified. |
| 73 | S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and as directed.Make: Cat No. S3010102 of CERA or equivalent model of makes specified. |
| 74 | S&F in repairs, vitreous china wash down water closet (pedestal pattern) white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws, etc. complete all as specified and as directed.Make: Cat No. S1053102 of CERA or equivalent model of makes specified. |
| 75 | S&F in repairs 10 ltr capacity PVC valve-less, syphonic action type flushing cistern, low level, white with inlet ball valve and handle including brackets complete all as specified and as directed.Make: Cat No. B1010110 of CERA or equivalent model of makes specified. |
| 76 | S&F in repair PVC connection, 15 mm size with PTMT nuts, 450 mm long complete all as specified and directed. |
| 77 | S&F in repairs PVC waste pipe 32mm bore plain 600mm long complete all as specified and as directed. |
| 78 | S&F SS Grating with square frame (Grating thk- 1mm & frame thk- 1.5mm) of size 125mm (minimum) with waste-hole complete all as specified and directed. Note: Design of grating to be approved by Engineer-in-Charge. |
| 79 | S&F SS Grating with square frame (Grating thk- 1mm & frame thk- 1.5mm) of size 100mm (minimum) with/ without waste hole as required complete all as specified and directed.Note: Design of grating to be approved by Engineer-in-Charge. |
| 80 | S&F in repair soap dish chromium plated, fixed to plugs with chromium plated screws complete all as specified and directed. |
| 81 | S&F in repairs, Health faucet (ABS Body) suitable for 15 mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.Make: Cat No. F8030111AB of CERA or equivalent model of makes specified. |
| 82 | S&F in repairs wall mixer for mixing hot and cold water and bend for connecting to shower, 15 mm bore screwed for iron pipe and fixed complete all as specified and as directed.Make: Cat No. F1015401 of CERA or equivalent model of makes specified. |
| 83 | S&F in repairs Central hole Wash Basin Mixer for mixing hot and cold water 15 mm bore screwed for iron pipe and fixed complete all as specified and as directed.Make: Cat No. F2014461 or F1015454 of CERA or equivalent model of makes specified. |
| 84 | S&F in repair overhead shower rose 125mm size with 200mm long shower arm and wall flange complete all as specified & directed by Engr-in-charge. Make: Cat No. F7020111AB of CERA or equivalent model of makes specified. |
| 85 | S & F in repairs, stop/ angle valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.Make: Cat No. F1015201 of CERA or equivalent model of makes specified. |
| 86 | S&F in repairs, bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make: Cat No. F1015151 of CERA or equivalent model of makes specified. |
| 87 | S&F in repairs, two way bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make: Cat No. F1015161 of CERA or equivalent model of makes specified. |
| 88 | S&F in repairs towel rail 60 cm long between flanges complete all as specified and as directed.Make: Cat No. F5015103CH of CERA or equivalent model of makes specified. |
| 89 | S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed by Engr-in-Charge |
| 90 | S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass corner shelf complete all as specified and directed by Engr-in-Charge |
| 91 | S&F in repairs, stainless steel sink with drain board made of 1mm thick sheet for kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 350mm x 200 mm including CP coupling complete all as specified and as directed.Make : Cat No. SBSD 05 (RR) of JAYNA or equivalent model of makes specified. |
| 92 | S&F in repairs, kitchen plate rack of overall size 786mm x914mm x 254mm made out stainless steel sheet not less than 0.63mm thick, design and pattern as approved by GE and fixed to wall with wooden plugs with chromium plated screws and cup washers complete all as specified and as directed.Make: Prayag cat No P-348 or Cat No. SSKPR 315 of Silvershine or equivalent model of makes specified. |
| 93 | S&F in repair bevelled edge looking mirror 5.5mm thick of size 600mm x 450mm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as spfd and directed by Engr-in-charge. |
| 94 | S&F in repairs, rotational moulded polyethylene water storage tanks colour white (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as specified and as directed. |
| 95 | S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified & as directed. Please Enable Macros to View BoQ information |
| 96 | S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified & as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender