Tender For Repair, Painting And Polishing Of Wooden And Steel Furniture And Conversion Of Charpoy, Gi Pipe Nylon Newar To Charpoy Gi Ply Top At Bso (South), Mic And S And Cqa(V) Under Ge(South) Ahilyanagar
Tender Value
41 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
0 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Painting And Polishing Of Wooden And Steel Furniture And Conversion Of Charpoy, Gi Pipe Nylon Newar To Charpoy Gi Ply Top At Bso (South), Mic And S And Cqa(V) Under Ge(South) Ahilyanagar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia, medium grade ISI marked weight not less than 450 Grams of each directed. FD-220 |
| 2 | M&L for removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed . FD-220 |
| 3 | M&L for removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked of make TATA/Jindal/Swastik/Zenith including cutting, threaing at both ends and fixing all asspecified and as directed. FD-220 |
| 4 | M&L for converting the unserviceable long rail obtained from item No 3.00 above into two short rail including cutting threading at both ends and fixing all as directed. |
| 5 | M&L for removing of unserviceable short rails of GI charpoy and converting the same into two legs including cutting, threding at one end and fixing including removing of unserviceable legs all as directed. FD-220 |
| 6 | M&L for removing of existing wornout newar of GI charpoy and reweaving the same with new 50/55mm wide nylon newar of vergin quality weighing not less than 1.50 Kg per charpoy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220 |
| 7 | M&L for removing of unserviceable nylon newar from charpoy GI pipe, S & F commercial plywood of size 1980mm x 900mmx12mm thick BWR grade and fixing with 06 Nos nut with bolt of 6mm dia 60mm long to be used for fixing of plywood top including drilling holes and following arrangement completed all as specified as directed by Engr-in-charge. FD-220(a) S&F 3 Nos 25mm square MS hollow tube 16 guage wall thickness of length not less than 83.6cms each welded with fillet weld all around 3mm thick to long rails of GI pipe Charpoy at equal space to support plywood all as directed |
| 8 | Notes : (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding & MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flushed with ply top & finished with suitable fitting. (iv) Legs of the charpoy to be welded with 3mm thick 50mm dia MS circular plate duly painted with two coats of synthetic enamel paint black over coat of red oxide primer. Make : Kitply, Greenply or Archid plywood or equivalent as approved by GE |
| 9 | M&L for removing unserviceable Square tube from Table dining ORs, Table clerk steel and Table office officer steel and S&F new square tube all as per directed by Engineer-in-charge. FD-165M |
| 10 | M&L for removing unserviceable top from table dining ORs and S&F new Top made out of 18/19mm particle board including cover of 22 mm guage aluminium sheet as per specification shown on drawing and as directed.FD-165M |
| 11 | M&L for removing unserviceable wooden parts from chair wooden bottom and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete. FD- 225, 285 |
| 12 | Rear legs |
| 13 | Front legs |
| 14 | Front/side rails |
| 15 | Stiffners |
| 16 | M&L for removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.. FD-279/228/16M |
| 17 | Rear legs |
| 18 | Front legs |
| 19 | Rear/front/side rails |
| 20 | Stiffners |
| 21 | Back rest |
| 22 | M&L for removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-280, FD-250 |
| 23 | Rear legs |
| 24 | Front legs |
| 25 | Rear/front/side rails/including cane hole |
| 26 | Stiffners |
| 27 | Back rest |
| 28 | Arms rest |
| 29 | M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD -229 |
| 30 | Rear legs |
| 31 | Front/rear/rails including cane holes |
| 32 | Side rails for seat including cane holes |
| 33 | Front /rear/stiffeners |
| 34 | Side rails for back rest including cane hole |
| 35 | Upper /lower rails for back rest including cane |
| 36 | Arms rest |
| 37 | M&L for removing unserviceable plastic cane from chairs, bin soil linen and stool dressing and recanning with 2mm wide and canning boarder 3/4 wide cane all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD- 244, 229, 27M |
| 38 | M&L for removing unserviceable plywood from chair wooden bottom without arms and supply and fix new plywood seat 6mm thick commercial plywood to the existing chair WB without arms duly french polished as required and as directed. FD-225, 285 |
| 39 | M&L for removing unserviceable wooden parts from table & Teapoys and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. |
| 40 | Legs for table dining 6/8 pers FD-30, 273, 239, 232 |
| 41 | Front/rear rails of table dining 6/8 pers FD-30, 273, 239, 232 |
| 42 | Side rails for table dining 6/8 pers FD-30, 273, 239, 232 |
| 43 | Stiffeners for table dining 6/8 pers FD-30, 273, 239, 232 |
| 44 | Centre rails of table dining 6/8 persons FD-30, 273, 239, 232 |
| 45 | Leg of table 3'x2' without/ with drawer FD-283, 224 |
| 46 | Front/rear rails of table 3'x2' without/ with drawers FD-283, 224 |
| 47 | Side rails of table 3'x2' without/ with drawers FD-283, 224 |
| 48 | Drawers of table 3'x2' FD-283, 224 |
| 49 | Front /rear top/bottom rails of table writing FD-249, 275 |
| 50 | Legs of table writing FD-249/275 |
| 51 | Stiffeners of table writing FD-249/275 |
| 52 | Side rails of table writing FD-249/275 |
| 53 | Legs of table centre FD - 235, 274 |
| 54 | Front/rear rails of table centre FD - 235, 274 |
| 55 | Stiffeners of table centre FD - 235, 274 |
| 56 | Bottom rails for table centre FD - 235, 274 |
| 57 | Legs of table 2' x 2' FD-95M |
| 58 | Front/rear/side rail of table 2 x 2 FD-95M |
| 59 | Leg of table 3 x 3 HF-209 |
| 60 | Front/rear/side rails of table 3 x 3 HF-209 |
| 61 | Legs of table dining 4x3 FD-273 |
| 62 | Side rails of table dining 4x3 FD-273 |
| 63 | Legs of peg table FD-25, 236, 277 |
| 64 | Bottom rail of peg table FD-25, 236, 277 |
| 65 | Top rail of peg table FD-25, 236, 277 |
| 66 | Leg of teapoy FD-34M, 232 |
| 67 | Top rail of teapoy FD-34M, 232 |
| 68 | Bottom rail of teapoy FD-34M, 232 |
| 69 | M&L for removing unserviceable wooden parts from sofa set and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specied and as directed. FD- 281, 373 |
| 70 | Legs of sofa chairs 70 x 35 x 30mm |
| 71 | Arms rest of sofa chairs 70X35X725mm |
| 72 | Wooden bearer 40X40X670mm |
| 73 | Wooden batten 50X20X670mm |
| 74 | Wooden rails 35X100X670mm |
| 75 | Wooden frame for head 70X35X600mm |
| 76 | Wooden rails to support back frame 30X50X670mm |
| 77 | Wooden bearer 40X40X1730mm |
| 78 | Wooden rail 35X100X1730mm |
| 79 | Wooden frame for back 70X35X1660mm |
| 80 | Sofa foam cushion of size 22x21x4 inches and density 40 alongwith cover and above all as specified and as directed. Make :- Foam cushion : Sleepwell or equivalent as approved by GE.Cover : Bombay dyeing, D'Décor or equivalent as approved by GE |
| 81 | M&L for removing unserviceable wooden parts from bed hard and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-246 , 247 |
| 82 | Short rails of bed hard |
| 83 | Long rails of bed hard |
| 84 | Stiffners of bed hard |
| 85 | Front leg of bed hard |
| 86 | Rear legs of bed hard |
| 87 | M&L for removing old unserviceable head rest and supply and fix new head rest to bed hard/bed newar as per specifications and as shown in drawing all as specified and as directed. FD-246, 247 |
| 88 | M&L for removing old unserviceable foot rest and supply and fix new foot rest to bed hard/bed newar as per specifications and as shown in drawings all as specified and as directed. FD-246 , 247 |
| 89 | CHAIR SCHOOL WITH HAND BOARD - FD-E6/MAP/5 |
| 90 | M&L for replacement of hand board of chair school of all as specified and as directed.Make : Godrej or equivalent as approved by GE. |
| 91 | M&L for replacement of seat of chair school all as specified and as directed Make : Godrej or equivalent as approved by GE. |
| 92 | M&L for preparation of frame of chair school with hand board including welding wherever required and scrapping cleaning & painting with one coat of synthetic enamel paint (black colour) all specified and as directed. FD/E6/MAP/5 |
| 93 | M&L for removing of unserviceable plywood from bed hard and S&F new ply wood 12mm thick commercial all as specified and as directed. FD-247, 246Make : Kitply/Green ply/Archid/Century as approved by GE |
| 94 | M&L for removing unserviceable drawer from the table dressing gents and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drawing and applying french polish as required all as specified and as directed. FD-230 |
| 95 | M&L for removing unserviceable top frame of table dressing gents and S&F new top frame to the existing table dressing gents and applying french polish as required all as specified and shown on drawings. FD-230 |
| 96 | M&L for removing unserviceable looking mirrior with frame from the table dressing gents and S&F new mirrior with frame to the existing table dressing gents with mirror and applying french polish as required all as specified and as directed. FD-230Make of the mirror : Modi guard or equivalent as approved by GE |
| 97 | M&L for removing unserviceable back base ply from table dressing ladies with mirror and S&F new back base ply to the existing table dressing ladies with mirror duly french polished as required all as specified and as directed. Make of mirror : Modi guard or eqivalent as approved by GE. FD-32M, 251 |
| 98 | M&L for removing broken unserviceable sliding glass shutter and aluminium channel and S&F new glass shutter and aluminium channel to the existing table dressing ladies all as specified and as directed. FD-32M, 251 |
| 99 | M&L for removing unserviceable back from side board and S&F new 6mm thick plywood commercial of same size duly french polished as reqd all as specified and as directed. FD-26M, 241 |
| 100 | M&L for removing unserviceable drawers from side board and S&F new drawers made out of 12mm commercial plywood of same size and applying french polish as reqd as directed. FD-26M, 241 |
| 101 | M&L for removing unserviceable door shutter from side board and S&F new door shutter of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around all as specified and as directed. FD-26M, 241 |
| 102 | M&L for removing unserviceable knob from side board and S&F new knob with suitable screw all as specified and as directed. |
| 103 | M&L for removing unserviceable top from side board and S&F new top of size 19/18mm thick prelaminated particle board one side teak face and other side white all as per drawing all as specified and as directed. FD-26M, 241 |
| 104 | M&L for spot welding of steel furniture items of broken joints etc, not exceeding 2.5cm in length and thickness 6mm including scraping, preparing the surface of welded portion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion by sprayer complete . Note:- Make of paint shall be Apcolite by Asian paints or equivalent or as approved by GE. |
| 105 | M&L for removing the unserviceable tops from the following tables and S&F new tops made out of 18/19mm prelaminated particle board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screw incl beading all around to the tops duly french polished as specified and as directed. |
| 106 | Table writing FD-249, 275 |
| 107 | Table centre FD- 335, 274 |
| 108 | Top for teapoy verandah FD-35M, 255 |
| 109 | Table 600X600mm FD-95(M) |
| 110 | Table 3X3 HF-209 |
| 111 | Table dining 4'x3' FD-273 |
| 112 | Table peg FD-25, 236, 277 |
| 113 | Teapoy FD-34, 232 |
| 114 | Table dining 6 persons FD-30, 273, 239 |
| 115 | Table dining 8 person FD-30, 273, 239 |
| 116 | Table 3X2 without & with drawer FD-283, 231, 284 |
| 117 | M&L for removing unserviceable hasp and staple 75mm chromium plated and fixing to steel shutter and locker bed side steel with suitable rivet/nut and bolt screw as shown on drawings all as specified and as directed. FD-1029, 257 |
| 118 | M&L for removing unserviceable legs from locker bed side and S&F new legs made out of 1.00 mm thick black sheet and fixing to locker bedside steel with suitable welding the legs shall be painted with one coat of red oxide primer and two coats of synthetic enameled paint with match the existing all as specificied and and as directed. FD-1029, 257 |
| 119 | M&L for removing unserviceable shutter of locker bedside and S&F new shutter to locker bedside steel and painted with two coats of red match with existing paint as shown on drawing all as specified and as directed |
| 120 | M&L for removing unserviceable handle from almirah large steel with shelves and providing new handle for almirah large steel and almirah medium steel with shelves as per specifications and shown on drawing all as specified and as directed. FD- 189M, |
| 121 | M&L for removing unserviceable locking device of Almirah large steel with shelves and Almirah med with shelves and providing new locking device including cover as per specification and shown on drawing and for directed.FD-189M |
| 122 | M&L for removing unserviceable lock from Almirah large steel with shelves and S&F new Godrej or equivalent lock with duplicate key all as specified and shown on drawing and as directed by Engr-in-charge.FD-189M |
| 123 | M&L for removing unserviceable shelves from Almira large steel with shelves and S&F new shelves for Almirah large steel with shelves made out of 1.00mm thik black sheet as per specified and shown on drawing all as specified and as directed.FD-189M |
| 124 | M&L for removing broken glass from Almirah large steel with shelves and S&F new 3mm thick sheet glass as per specified and shown on drawing all as specified and as directed. |
| 125 | M&L for removing unserviceable legs from Almirah large steel with shelves and Almirah med steel with shelves and S&F new legs made out of 1mm thick M S black sheet as specified and shown on drawing all as specified and as directed.FD- 1032, 243 |
| 126 | M&L for removing unserviceable locks from table office clerk and table office officer steel and S&F new locks to table clerk steel and table office officer steel all as specified and as directed. FD-1003, 1004 |
| 127 | M&L for removing unserviceable legs from Almirah large steel with half portion for hanging clothes and half portion with shelves and S&F new legs made out of 1mm thick M S black sheet as specified and shown on drawing all as specified and as directed.FD- 1032, 243 |
| 128 | M&L for removing unserviceable clips and providing new clips to shelves of almirah large steel with shelves and med steel with shelves as specified and shown on drawing and as directed.FD- 1032, 243 |
| 129 | M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :- |
| 130 | Seat of chair CB steel with arms FD-75M |
| 131 | Back of chair CB steel with arms |
| 132 | M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following :- FD-75M |
| 133 | Seat of chair CB steel without arms |
| 134 | Back of chair CB steel without arms |
| 135 | M&L for removing old unserviceable seat from chair CBA spl and S&F new seat made out of 1st class hard wood Indian teak wood duly canned with 2mm plastic cane as per existing pattern and as directed. FD- 75M |
| 136 | M&L for removing old unserviceable back of chair CBA spl and S&F new back of chair made out of 1st class hard wood Indian teak wood duly canned with 2 mm plastic cane as per existing pattern and as directed . FD- 75M |
| 137 | M&L for removing unserviceable hand rest from chair CBA spl with hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished as specified and and as directed. FD- 75M |
| 138 | M&L for removing unserviceable plastic cane from chair verandah and recanning with 4/5mm half round plastic cane good quality including painting of chair verandah all as specified and as directed. FD-256, 19MMake of paint : Apcolite by asian paints (high glossy) or equivalent as approved by GE. |
| 139 | M&L labour for painting to the frame of form without back with one coat of synthetic enmal paint black to existing form without back all as per specification and shown on drawing. FD-77M |
| 140 | M&L for removing dent and bents of following steel furniture articles and applying one coat of synthetic enamel paint by sprayer including preparation of surfaces complete all as specified and as directed. |
| 141 | Almirah large steel with shelves FD- 189M |
| 142 | Almirah med/small with shelves FD-243, 1032 |
| 143 | Locker bed side steel FD-1029, 257 |
| 144 | Table with drawer steel FD-1008 |
| 145 | Table office clerk steel FD-1004 |
| 146 | Table office officer steel FD-1003 |
| 147 | Table dining ORs FD-165M |
| 148 | Chair CB steel with arms FD-75(M) |
| 149 | Chair CB steel without arms FD-75(M) |
| 150 | Chair verandah steel with white paint FD-256 |
| 151 | Chair CBA special FD-260 |
| 152 | Removing unserviceable plastic cane from seat of chair dining and supply and fix new 4mm thick PVC seat complete all as directed. (FD-279/228/16M) |
| 153 | Removing unserviceable plastic cane from seat and back of chair verandah and supply and fix new 4mm thick PVC seat and back set complete all as directed.(FD/ MAP-II/15, FD-19, FD-359, FD- 256) |
| 154 | M&L for removing existing polish of following wooden furniture and applying melamine polish by Asian Paints /Nerolac/Berger paints strictly as per manufacturers instructions all as specified and as directed.Note : Colour of polish shall be as approved by GE |
| 155 | Book shelf open small DB-1121 |
| 156 | Book shelf open large FD-4121 |
| 157 | Bed hard with ply top FD-246/ 247 |
| 158 | Chair WB without arms FD-225/285/56 |
| 159 | Chair writing FD-280/ 250 |
| 160 | Chair dining FD-279/ 16M/ 228 |
| 161 | Chair easy FD-229 |
| 162 | Sofa set 4 seater FD-281, 373 |
| 163 | Sofa set 5 seater FD-281, 373 |
| 164 | Table centre FD-29, 235 |
| 165 | Table peg FD-25, 236, 277 |
| 166 | Table dining 6 person FD-239, 30, 273 |
| 167 | Teapoy FD-34, 232 |
| 168 | Table bed side FD-248 |
| 169 | Table dressing Gents with mirror FD- 230 |
| 170 | Table dressing ladies with mirror FD-251, 32 |
| 171 | Table writing FD-249, 275M |
| 172 | Table dining 8 pers FD-30, 273, 239 |
| 173 | Bin soil linen FD-244 |
| 174 | Side Board FD-241 |
| 175 | Stool dressing CB FD-282 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender