Tender For Repair/Replacement Of Fencing, Jally Walls, Security Wall And Misc Works Etc At Area South & North Avenue At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
96 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
5 days left
EMD
1.69 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Fencing, Jally Walls, Security Wall And Misc Works Etc At Area South & North Avenue At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | Corrigendum 01 | BOQ | 26-Oct-2026 |
| 2 | 17-Oct-2026 | Corrigendum 01 | BOQ | 02-Nov-2026 |
| 3 | 26-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement concrete Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Supply and fixing for providing precast cement concrete louvres and jallies, 50 mm thick (measured solid) type B0 (1:2:4 using 12.5mm stone aggregate) set in cement mortar 1:4 , including all mouldings but excluding frame complete all as specified and directed.Note :- Pre cast frame shall be measured separately. |
| 3 | M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20mm sotne aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 4 | M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20mm sotne aggregate as Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 5 | M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20mm sotne aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 6 | M&L for Form work for flat rough finish surface of concrete(square or rectangular or polygonal) for sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 7 | M&L for Formwork to rough finished surfaces of concrete (flat) sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed. |
| 8 | M&L for Form work for flat rough finish surface of concrete(square or rectangular or polygonal) forFormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | All as per item No. 9.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 11 | Excavation in trenches not exceeding 1.5 M deep for foundation etc and getting out in soft / loose soil all as specified and directed. |
| 12 | M&L for cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in foundation, filling and mass concrete all as specified and directed. |
| 13 | Demolition of brick work or stone / boulder masonry built in cement mortar including removal of debries outside of Dockyard premises complete all as specified and directed. |
| 14 | M&L for Pre cast cement concrete type 1:3:6 type C-2 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 17 | M&L for chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray cement and pigments and incl cement screed bed15mm thick in 1:4 all as specified and directed. |
| 18 | S&F in repair precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 (1:2:4 using 12.5mm stone aggregate) set in cement mortar 1:4 , including all mould-ings but excluding frame all as specified and directed.Note :- Pre cast frame shall be measured separately. |
| 19 | Material & labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed. |
| 20 | Returning, filling in, including spreading, levelling, waering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. |
| 21 | Removing excavated material outside of Naval dockyard premises complete all as specified and directed. |
| 22 | Dismantling posts or struts (wood, steel or R.C.C.) any section embeded cement concrete, brick work masnory, ect, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 23 | Excavating in post holes (or similar holes) each not exc 0.5 CuM, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil all as specified and directed. |
| 24 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation and mass concrete all as specified and directed. |
| 25 | Supply and fix rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed. |
| 26 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome complete all as specified and directed. |
| 27 | Dismantling fencing wire mesh, any type all as specified and directed. |
| 28 | S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped,wired and laid in position,including closing after filling or cages straining and fixing to RCC/MS fencing post complete all as specified and directed. |
| 29 | Supply and fix mild steel screw bolts of 5 to 10mm dia of shank (machine made ) with hexagonal or square heads at one end and scewed the other each screwed end to be fitted with washers and one hexagoal or square nut, eceedinng 10cm ad not exceeding 15cm long all as specified and directed. |
| 30 | Supply only Mild steel round bars 10mm dia and over for Fe-410-W, (Gde.E-250) quality-A or Fe 290 (Gde -E-165) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 31 | M&L for providig providing precast cement concrete solid building blocks (type C1 1:3:6, using 20mm stone aggregate) set in cement mortar 1:4 or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls complete all as specified and directed. |
| 32 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using Extra Cement complete all as specified and as directed. |
| 33 | M&L for preparation of new plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 34 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 35 | M&L for providing cement concrete (type B0 1:2:4, using 12.5 stone aggregate) as in coping complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 days
Nov 02, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender