Tender For Preventive Repairs/Maintenance To Reinforced Cement Concrete Structural Members, Walls, Floors And Connected Works To Enhance The Service Life Of Certain Buildings Of Area C & D At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
90 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
27 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Preventive Repairs/Maintenance To Reinforced Cement Concrete Structural Members, Walls, Floors And Connected Works To Enhance The Service Life Of Certain Buildings Of Area C & D At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises and removing debris out side Dockyard complete all as specified and directed. |
| 2 | M&L for coloured non skid ceramic tiles area of each tiles exceeding 0.11 but not exceeding 0.18 sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including cement screed 15 mm thick in 1:6 complete all as specified and directed. |
| 3 | M&L for coloured glazed ceramic tiles (300 x 450) x 7-8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl rendering in CM 1:4, 10 mm thick complete all as specified and directed. |
| 4 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement morter including roughning surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. |
| 5 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 6 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 7 | M&L for rounding to edges of granite stone slabs one edge such as in steps, cooking plateform or any location etc., complete all as specified and as directed. |
| 8 | Demolition of RCC work of any description and in any position not otherwise specifically provided and removing debris out side Dockyard complete (reinforcement cut as required to facilitate demolition) all as specified and directed. |
| 9 | M&L reinforced cement concrete 1:11/2 :3 type A1 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers posts, beams and struts and simillar work etc including form work complete all as specified and directed. |
| 10 | M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as reinforcement complete all as specified and directed. |
| 11 | Material & labour for chipping (30mm to 75mm) of existing damaged, spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete is observed by using mechanical means and manual chisels and further the surface is cleaned with water jet, again clean the surface with blower to remove all loose fine particles present in the surfaces and for removal of dust and loose particles including hoisting assembling and fixing of double layer steel scaffolding complete all as specified and directed.Note :- (i) Revmoving rubbish off the premises and deposting at outside ND land no seperate paid (ii) Work shall be carried out at any location or height i.e hills etc., cost of the work deemed to be included in items. |
| 12 | M&L for preparation of exposed of rusted steel reinforcement with metal wire brush , cleaning the rusted surfaces free from loose rust and application of rust remover cum passivator with brush to the rusted reinforcement , and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper and thoroughly washed with water with the help of pressure jet and allowing it to dry complete all as specified and directed.Note: Length of cleaned reinforcement steel bar shall be measured for payment. |
| 13 | M&L for preparation of surfaces of steel of reinforcement by cleaning and providing, mixing and applying zinc anti-rust agent as per manufacturers method of application to rebar corrosion protection system to reinforcement Fosroc or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch @3.75Kg/Sqm surface of steel reinforcement in two coats complete all as specified and directed. |
| 14 | M&L for applying a coat of polymer modified cementious bonding coat on the concrete surfaces with one part of Styrene Butadiene Rubber latex emulsion (SBR latex) manufactured by M/s Fosroc chemicals or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch with four parts of water and six parts of cement by weight. Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed. |
| 15 | M&L for providing Shear connectors and Anchoring by drilling 16 mm dia holes up to depth of 100mm in concrete surfaces and fixing 10 mm dia TMT bars L shaped anchor rods as shear connectors by using Fosroc Lokfix chemical or any other equilent make as approved by GE (Mix of base and hardener of the polyester resin) in defective concrete area of the slab / column / beams / chajjas / lintel etc or any other structural member as per site requirement after cleaning the drilled hole by using water jet and after drying clean the surface with blower to remove all loose fine particles present in the hole. The Mix of base and hardener of the polyester resin shall be prepared by thorough mixing of base & hardener by the help of spatula. After preparing the mix the holes shall be filled to a minimum depth of 1/3rd of the hole with the prepared polyester resin and the reinforced bar shall be inserted to full depth of hole and extra length of the reinforcement bar shall be bent into the concrete to maintain proper cover to the reinforcement complete all as specified and directed. |
| 16 | M&L for supply, mixing and placement of micro-concrete cement base prepacked single component chloride free, sulphate free, non-shrink flow self compacting,ready to use after mixing in proportion of sika Rep Microconcrete or renderoc-RG of fosroc in required thickness as per manufacture's instruction and all as direction. (Renderoc-RG of Fosroc Makeor equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch having a compressive strength of 50 MPA strength for reparing of RCC members like columns, Beams etc. complete all as specified and directed. |
| 17 | Material & laobur for application of polymer modified reinstatement mortar in isolated places of repair works of RCC members with Rendroc S2 of M/s Fosroc make or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch having a compressive strength of 40 MPa complete all as specified and directed. |
| 18 | M&L for applying of hingh efficiency polymeric base film forming curing agent/compound over concrete surface and maximum covarage area 5.0 sqm per litre as per manufactures instruction complete all as specified and directed. |
| 19 | Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed. |
| 20 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 194 of SSR Part -II complete all as specified and directed. |
| 21 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page no 184 of SSR Part -II complete all as specified and directed. |
| 22 | S&F stainless steel butt hinges medium weight of size 100 mm complete all as specified and directed. |
| 23 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 24 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 25 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 26 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm but not exc 4 Sqm each complete all as specified and directed. |
| 27 | S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below; each shutter having 2 Nos. ‘D’ type aluminium handles of 150 mm long, 2 Nos. aluminium tower bolts of 150 mm long and 1 No. mortice lock of 6 lever with key in duplicate; shutters are partly glazed with 5 mm thick sheet glass and partly paneled with 12 mm thick pre-laminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete.Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg./RM appx.)Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg./RM appx.) Bottom rail : 150.00 x 2.20 mm thick (2.376 Kg./RM appx.) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg./RM appx.) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg./RM appx.) |
| 28 | S&F factory made UPVC white colour sliding window three track of area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67 mm). Sliding mesh Sash (42mm x 57mm) sliding interlock (one vertical lenght in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + - 0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated ), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: the unit rate quoted by the contractor excludes cost of glass, steel wire cloth but includes all other connected accessories. Net opening will be measured for payment purpose. Please Enable Macros to View BoQ information |
| 29 | S&F factory made UPVC white colour sliding window three track of area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67 mm). Sliding mesh Sash (42mm x 57mm) sliding interlock (one vertical lenght in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + - 0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated ), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: the unit rate quoted by the contractor excludes cost of glass, steel wire cloth but includes all other connected accessories. Net opening will be measured for payment purpose. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender