Tender For Repair/Replacement Of Foot Path Tiles, Interlocking Paver Blocks, Chequered Tiles, Parking Tiles, Hard Standing Etc., At Area C & D At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
80 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
22 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Foot Path Tiles, Interlocking Paver Blocks, Chequered Tiles, Parking Tiles, Hard Standing Etc., At Area C & D At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / boulder masonry built in cement mortar including removal of debries outside of Dockyard premises complete all as specified and directed. |
| 2 | M&L for Pre cast cement concrete type 1:3:6 type C-1 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and getting debris outside dockyard premises all as specified and directed. |
| 4 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for preparation of new surfaces and applying three coats of white wash complete all as specified and directed. |
| 7 | M&L for preparation of new plastered surfaces of walls and M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 8 | M&L for wall care puty of 2mm thick complete all as specified and directed. |
| 9 | Dismantling tiles/paver block of any description or thickness in floors, aprons etc.of and removing debris outside from the Dockyard premises all as specified and directed |
| 10 | M&L for Re-fixing of interlocking paver block (Material obtain from Item No-9) with grey cement and pigment any shape and size , laid over sand cushioning complete all as specified and directed. |
| 11 | M&L for Complete removal of existing treatment on walls surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 12 | M&L for moorum filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering all as specified and directed. |
| 13 | M&L for 50mm thick sand filling under floor or in foundation including watering consolidation complete all as specified and directed. |
| 14 | M&L for machine pressed precast cement concrete interlocking paver block with grey cement and pigment any shape and size of 60mm thickness , M-35 graded laid over sand cushioning complete all as specified and directed. |
| 15 | M&L for Hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 16 | M&L for 40 mm thick Plain cement concrete (PCC) 1:2:4 type B- 0, (12.5mm graded aggregate) as in sub floors, sub bases, and pavings etc complete all as specified and directed. |
| 17 | M&L for providing, cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 18 | Demolition of cement concrete in ground floors and pavings/ drain bedding not exceeding 15 cm thickness (below or above ground level) etc and disposing off the debris out side naval Dockyard premises complete all as specified and directed. |
| 19 | M&L for 75mm thick Cement concrete type B- 2,1:2:4 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed. |
| 20 | M&L for decorative (Endura tiles / stair tiles) area exc 0.09 sqm but n.exc. 016 sqm, 7 to 8 mm thickas in treads / rise / landing of stair laid over 15 mm thick cement screed (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the tiles complete all as specified and directed. |
| 21 | M&L for chequered cement concrete tiles with grey and any pigments area exc 0.09sqm but n.exc 0.16 sqm of 25mm thick, set, jointed and pointed in neat cement slurry in floors and incl cement screed 15mm thick in 1:6 all as specified and directed |
| 22 | Demolition of reinforced cement concrete in any position and removal of rubbish outside Dockyard premises complete all as specified and directed. |
| 23 | M&L for precast cement concrete Type B1 (1:2:4) (20mm graded aggregate) in manhole covers setting in cement mortar (1:4) complete all as specified and directed. |
| 24 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 26 | M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) as in sub floors, sub bases, and pavings etc complete all as specified and directed. |
| 27 | M&L for 25mm thick Plain Cement concrete (PCC) 1:2:4 type B- 0, (12.5mm graded aggregate) as in sub floors, sub bases, and pavings etc complete all as specified and directed. |
| 28 | M&L for forming 12mm thick expansion joints for thickness of slab 100mm filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed. |
| 29 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound and sealed with sealing compound, Grade ‘A’ complete all as specified and directed. |
| 30 | M&L for finishing surface of concrete roads, pavements, by brooming complete all as specified and directed. |
| 31 | M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 32 | M & L for cement concrete 1:2:4 type B- 2, (40mm graded aggregate) as in surface channels and drains complete all as specified and directed. |
| 33 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 34 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,manhole covers, duct covers and similar work conforming to Fe-290.Gde-E-165 complete all as specified and directed. |
| 35 | S&F for rolled mild steel chequered plate as covers confirming to Fe 290.Gde-E-165 welded to supporting of duct covers complete all as specified and directed. |
| 36 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of zinc chromate primer all complete all as specified and directed. |
| 37 | Material and labour for hot applied thermo setting road marking paint 1mm to 2mm thick in shapes/signs as required exceeding 10cm to 50cm width (Including Zebra crossing & speed breaker marking), white or golden yellow in colour including preparaton of exising surfaces and glass beads retro reflective type as per ASTM standards complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender