Tender For Repair / Replacement Of Distribution Pipe Lines Gi/Ms With Seamless High Carbon Steel Pipes Of Various Sizes Including Fittings And Certain Other Allied Works At Kasauli Under Ge Kasauli
Tender Value
40 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
13 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Distribution Pipe Lines Gi/Ms With Seamless High Carbon Steel Pipes Of Various Sizes Including Fittings And Certain Other Allied Works At Kasauli Under Ge Kasauli
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches hard/dence not exc 1.5 mtr wide and not exc 1.5 mtr in depth (for taking up or laying of pipes/cables) and getting out and forming bottom surface to gradient complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 3 | Removing excavated surplus soils to a distance n.exc 50 mm and deposited at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 4 | Material and Labour steel water tubing galvanised iron 100 mm bore medium grade laid in trenches/under roads/floors etc incl, tees, bends , unions , flanges, Teflon tape and all fittings including taking up or down 100mm bore steel water tubing pipe removing from site complete all as specified and as directed. |
| 5 | Material and Labour steel water tubing galvanised iron 80 mm bore medium grade laid in trenches/under roads/floors etc incl, tees, bends , unions , flanges, Teflon tape and all fittings including taking up or down 100mm bore steel water tubing pipe removing from site complete all as specified and as directed. |
| 6 | Material and Labour steel water tubing galvanised iron 50 mm bore medium grade laid in trenches/under roads/floors etc incl, tees, bends , unions , flanges, Teflon tape and all fittings including taking up or down 100mm bore steel water tubing pipe removing from site complete all as specified and as directed. |
| 7 | Material and Labour steel water tubing galvanised iron 40 mm bore medium grade laid in trenches/under roads/floors etc incl, tees, bends , unions , flanges, Teflon tape and all fittings including taking up or down 100mm bore steel water tubing pipe removing from site complete all as specified and as directed. |
| 8 | Material and Labour steel water tubing galvanised iron 25 mm bore medium grade laid in trenches/under roads/floors etc incl, tees, bends , unions , flanges, Teflon tape and all fittings including taking up or down 100mm bore steel water tubing pipe removing from site complete all as specified and as directed. |
| 9 | Material and Labour steel water tubing galvanised iron 20 mm bore medium grade laid in trenches/under roads/floors etc incl, tees, bends , unions , flanges, Teflon tape and all fittings including taking up or down 100mm bore steel water tubing pipe removing from site complete all as specified and as directed. |
| 10 | Material and Labour steel water tubing galvanised iron 15 mm bore medium grade laid in trenches/under roads/floors etc incl, tees, bends , unions , flanges, Teflon tape and all fittings including taking up or down 100mm bore steel water tubing pipe removing from site complete all as specified and as directed. |
| 11 | Supply and fixing in repairs/replacement gun metal gate valve 50 mm bore with iron wheel head screwed both ends for iron pipes including all fitting with teflon tape complete all as specified and directed. |
| 12 | Supply and fixing in repairs/replacement gun metal gate valve 25 mm bore with iron wheel head screwed both ends for iron pipes including all fitting with teflon tape complete all as specified and directed. |
| 13 | Supply and fixing in repairs/replacement gun metal gate valve 20 mm bore with iron wheel head screwed both ends for iron pipes including all fitting with teflon tape complete all as specified and directed. |
| 14 | Supply and fixing in repairs/replacement gun metal gate valve 15 mm bore with iron wheel head screwed both ends for iron pipes including all fitting with teflon tape complete all as specified and directed. |
| 15 | Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 150 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge. Note:- New pipes shall be laid first at spring area and old ones to be taken out later. |
| 16 | Supplying, laying, jointing in replacement and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 168.30 mm, with nominal wall thickness 7.11 mm and weight 28.26 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed. (iii) Any other expenses including permision from state authorities are included under this item. |
| 17 | Material & labour for MS Flange of inner dia 150 mm (outer dia 164.22mm) and 280 mm outer dia of thickness 25.3 mm having 8 drilled holes complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed. |
| 18 | Supply and Fixing in replacement joint for 150mm nominal size pipes comprising of one 3.0 mm steel reinforced compressed asbestos fibre gasket and incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, for each pipe /fittings/bends etc complete all as specified and directed. |
| 19 | Taking Down Unsv Exiting Panel and Supply, installation, testing and commissioning of Automatic Transfer Switch (ATS) Panel suitable for 220 HP (164 kW), 415 V ±10%, 3 Phase, 50 Hz induction motor, fabricated from 2.0 mm thick CRCA sheet steel, floor-mounted, dust and vermin-proof, powder-coated enclosure with PU gasket, having IP-54 degree of protection, complete with all internal wiring, busbars, control components and accessories required for satisfactory operation, comprising the following: (i) 630 Amps, 3 Pole MCCB, 50 kA breaking capacity, with rotary operating handle – 02 Nos (ii) 630 Amps Heavy Duty Automatic Transfer Switch (ATS) with adjustable transfer delay and re-transfer delay, suitable for motor duty and minimum 5 starts per hour – 01 No. (iii) Electronic Motor Protection Relay (EOCR) providing protection against overload, short circuit, single phasing, phase reversal, phase unbalance, locked rotor and under/over current – 01 No (iv) Digital Ammeter and Voltmeter (96 × 96 mm) completes with suitable Current Transformers (CTs) and ammeter selector switch – 01 Set. (v) RYB Phase Indicating Lamps with LED type indication – 01 Set. (vi) ON, OFF, TRIP and AUTO indication lamps, START/STOP push buttons and AUTO/MANUAL selector switch – 01 Set. (vii) Copper busbars of suitable rating with color-coded heat shrink sleeves, adequately supported on SMC/DMC insulators. FRLS copper internal wiring, cable alleys, gland plates, copper cable lugs, ferrules and terminal blocks.(Viii) Control Transformer complete with primary and secondary protection through MCBs.Control MCBs, auxiliary relays, timers, contactors (if required), indicating lamps (ix) MS base frame fabricated from 70 × 70 × 5 mm MS angle, complete with anti-rust primer, two coats of synthetic enamel paint, foundation bolts, anchor fasteners, grouting and all accessories required for rigid floor mounting of the ATS panel. The panel shall be factory wired, tested and commissioned, complete with all hardware, earthing terminals, name plate, circuit diagram and operating manual. The panel shall be complete in all respects and ready for satisfactory operation at site complete all as specified and directed . |
| 20 | Taking down unserviceable sluice valve from existing position and supply and fixing in replacement CI Sluice valve of 150 mm dia bore, seated gate valve with pocket less body, SS Stem (AISI 410), EPDM coated DI wedge 100% vaccum tight design with toroidal sealing rings & over 250 micron epoxy coating in PN 1.6 designed to BS:5163/IS:14846 Non-Rising stem type with gear wheel operation with including necessary arc/gas welding with flange as per existing pipe line , tail pics of MS Pipe as per site requirement not less than 350mm length, dia of tail peace as per existing pipe ,stainless steel spindle of suitable length including suitable size nuts, bolts, washer and rubber gasket all as required and directed at site. Make : Kartar/Kirloskar/BIR |
| 21 | Description all as per Srl item No.20 here in before but for sluice valve size 100 mm dia bore complete all as specified and directed. |
| 22 | Description all as per Srl item No.20 here in before but for sluice valve size 80 mm dia bore complete all as specified and directed. |
| 23 | Material and labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate for anchorage blocks for pipe line/making good the cut portion of roads/paths/hard standings etc including necessary from work where required , to support the pipe line complete all as specified and as directed. |
| 24 | Supply And Fixing in replacement and testing of high pressure, heavy duty cast steel sluice valve, nominal size 150mm, conforming to API 600, classs 600, Suitable to hydrostatic test pressure for body 156 KG /sq cm & for seat 115kg/cm, both ends flanged in existing line, after removal of old unservicable gate valve without damaging to exting pipe line complete all as specified and diected by Engr-in-charge. NOTE:- Suitable size MS Flange for exiting pipe line, joints and joining materials shall be including under this item |
| 25 | Supply, installation, testing and commissioning of chlorine dosing pump model RA-11 electromagnetic type with accessories like anti siphon valve/ discharge tubing capable to driver 10LPH @ 6 kgs/cm squ back pressure and FRP solution preparation tank capacity : 100 Ltr with lid, port hole, onlet / outlet / drain connection, level guage etc and fitted with 960 RPM motor & PVC agitator complete all as specified and directed. |
| 26 | Material and labour for removal of existing sludge from reservoir, including collection and deposition of sludge up to a distance of 100 m in compliance with environmental norms of Himachal Pradesh. The work shall further comprise cleaning and scrapping of deposits from floor and walls, followed by thorough washing of reservoir walls and floor using bleaching powder solution. Scope also includes marking of tank level and writing work with synthetic enamel paint on the reservoir wall (indicating capacity, date of cleaning, date of next cleaning, location, etc.), for following capacity of reservoir complete as specified and directed.Note- The reservoir under defect liability period/ cleaning carried out in previous year contract shall not be executed under this contract. |
| 27 | 5.00 Lakhs gallon water supply installation |
| 28 | 7.00 Lakhs gallon water supply installation |
| 29 | 3.50 Lakhs gallon water supply installation |
| 30 | 0.50 Lakhs gallon water supply installation |
| 31 | Supply and fixing in replacement of pressure booster pump 1 phase 0.5 HP, 2900 RPM No Voice and Vibration, trubble free with air vessel complete all as specified and directed. |
| 32 | Amount of credit of Rs. 328400.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender