Tender For Special Repair To Internal Roads At Arty Centre Nasik Road C Under Ge Nrc
Tender Value
24 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
15 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Internal Roads At Arty Centre Nasik Road C Under Ge Nrc
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm and exc 100mm but n.exc 150mm deep complete all as specified and directed. |
| 2 | M&L for laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) in two layers of 75mm each using Sensor paver, grading as pe table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and directed. |
| 3 | M&L for Preparing of unsurfaced water mix macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying prime coat providing and applying primer coat with VG-10 @ 7.5 kg/10 Sqm complete all as specified and directed. |
| 4 | Repairs to pot holes any depth n.exc 1 Sq.m area each incl sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road material) complete all as specified. |
| 5 | M&L for Premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (Paving bitumen of any penetration) of 4% by weight of total mix all as specified and directed |
| 6 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and providing and applying evenly a priming/tack coat with bituminous primer VG-10 at 5 kg per 10 sqm complete all as specified and directed. |
| 7 | M&L for preparing existing BM surfaces by brushing with wire brushes for removing caked mud etc. moistening the surface including cost and applying evenly a priming/tack coat using with bituminous primer of paving bitumen Vg - 10 at the rate of 2.5 Kg per 10 Sqm complete all as specified and directed. |
| 8 | M&L for premixed bituminous semi-dense asphaltic concrete 30 mm consolidated thickness with max 5% binder content, paving bitumen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and directed. |
| 9 | M&L preparation of road surface and applying thermoplastic reflective paint in white or any tint marking of min 2 mm thick single coat as in center line and edge line road marking of 100 mm width using ''HOT MARK\\" thermoplastic modern propelled road marking machine as directed incl all ingredients such as blinder, glass beads, Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 650.4 of MoRTH specifications incl spraying of glass beads etc all as per manufactures instructions and as directed |
| 10 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions all as specified and directed. |
| 11 | Supply and fix in repair solar cat eye aluminum alloy shall be 100% water proofing design according to 65, of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystaline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturers instructions etc all as specified and directed. |
| 12 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos, 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2;4 (150 X 150 X 300mm) type B1 complete all as specified and directed. |
| 13 | Supply and fix in repair road convex mirror having 130 degree of viewing angle made of one piece polycorbonate lense size 80 cm dia protect with any type of light ray and not produce toxic fumes in burnt, including all fixing arrangements, mounting pole and neccessary foundations complete all as specified and directed. Note:- Convex mirror supplied by the contractor shall conform to relevent road standard. |
| 14 | S&F in repair Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 15 | Excavation in post holes or similar holes) each n exc 0.5 cum getting out, returning filling and well ramming earth or broken rubble mixed with earth in layers nexc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surfaces complete all as specified and directed. |
| 16 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation and mass filling etc complete all as specified and directed. |
| 17 | M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering for road berms etc edges filling to level with surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender