Tender For Special Repair/Replacement Of Electric Panels And Feeder Pillar Boxes At Fad (Main) At Suranussi .
Tender Value
37.81 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
1 days left
EMD
75700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Electric Panels And Feeder Pillar Boxes At Fad (Main) At Suranussi .
BOQ
| Sl. No. | Item Description |
| 1 | Taking down existing LT panel by disconnecting all incoming and outgoing cables, earthing connection, dismantling PCC and making good the disturbed surface all as directed. |
| 2 | Design, Fabrication, Supply, installing, testing and commissioning of feeder pillar, outdoor cubical type weather and vermin proof totally enclosed made out of 3 mm thick CRCA powder coated sheet machine pressed of size 1500mm x 1500mm x 500mm min (compartment box size), suitable to operate on 3 phase 4 wire system, 415 volts, 50 Hz double door with front and rear openable with locking arrangement including inner independent enclosures for all switches/ MCCBs/ metering equipments with hinged (bottle type) shutters, bottom removable gland plate with sufficient numbers of circular cable entry holes with cable glands of suitable size of cable & with suitable cable glands as per number of outgoings, prewired complete duly powder coated with 7 tank process with base frame made of angle iron 50 mm x 50 mm x 6 mm, legs 100 cm long, grouted 45 cm in PCC (1:3:6) type C-1 including brick masonary platform having openable apron on all three sides of panel 30 cm wide and all as specified and directed by Engr-in.charge, comprising of following :- |
| 3 | Bus bar: Bus bar suitable for 3 phase, 415 volts, 50 Hz, 4 wire system of rating 500 Amps made out Aluminium bus bar strip of suitable size with coloured heat shrinkable sleeves in four colours (Red, yellow, blue and black) fixed on resin cast insulators including galvanised nuts, bolts and washers etc fitted with and including the following :-(i) MCCB Four Pole 320Amps, 35 KA, Ics = 100% Icu (Incoming) - 01 Nos(ii) MCCB Four Pole 160 Amps 25 KA, Ics = 100% Icu (outgoing) - 01 Nos(iii) MCCB Four Pole 100 Amps 25 KA, Ics = 100% Icu (outgoing) - 01 Nos(iv) MCCB Four Pole 63 Amps 16KA, Ics = 100% Icu (outgoing) - 02 Nos(v) Multifunction meter with LED display able to disply Voltage, Amp, PF, kWH, KW, KVA - 01 No class 1 with RS485 port with reqd CTs set-3 of suitable rating(vi) Indicator lamp set RYB LED TYPE - Set of 03 Nos and including danger notice plate. |
| 4 | Design, Fabrication, Supply, installing, testing and commissioning of feeder pillar, outdoor cubicle type weather and vermin proof totally enclosed made out of 3 mm thick CRCA powder coated sheet machine pressed of size 1500mm x 1500mm x 500mm min (compartment bx size), suitable to operate on 3 phase 4 wire system, 415 volts, 50 Hz double door with front and rear openable with locking arrangement including inner independent enclosures for all switches/ MCCBs/ metering equipments with hinged (bottle type) shutters, bottom removable gland plate with sufficient numbers of circular cable entry holes with cable glands of suitable size of cable & with suitable cable glands as per number of outgoings, prewired complete duly powder coated with 7 tank process with base frame made of angle iron 50 mm x 50 mm x 6 mm, legs 100 cm long, grouted 45 cm in PCC (1:3:6) type C-1 including brick masonary platform having openable apron on all three sides of panel 30 cm wide and all as specified and directed by Engr-in.charge, comprising of following :- |
| 5 | Bus bar: Bus bar suitable for 3 phase, 415 volts, 50 Hz, 4 wire system of rating 250 Amps made out of Aluminium bus bar strip of suitable size with coloured heat shrinkable sleeves in four colours (Red, yellow, blue and black) fixed on resin cast insulators including galvanised nuts, bolts and washers etc fitted with and including the following :-(i) MCCB Four Pole 160 Amps, 25 KA, Ics = 100% Icu (Incoming) - 01 Nos(ii) MCCB Four Pole 100 Amps 25 KA, Ics = 100% Icu (outgoing) - 01 Nos(iii) MCCB Four pole 63 Amps 16 KA, Ics = 100% Icu (outgoing) - 01 Nos(iv) MCB DP 40 Amps 10 KA, (outgoing) - 03 Nos(v) Multi function meter with LED display able to disply Voltage, Amp, PF, kWH, KW, KVA - 01 No class 1 with RS485 port with reqd CTs set-3 of suitable rating |
| 6 | Design, Fabrication, Supply, installing, testing and commissioning of feeder pillar, outdoor cubicle type weather and vermin proof totally enclosed made out of 3 mm thick CRCA powder coated sheet machine pressed of size 1200mm x 1000mm x 400mm min (compartment box size), suitable to operate on 3 phase 4 wire system, 415 volts, 50 Hz double door with front and rear openable with locking arrangement including inner independent enclosures for all switches/ MCCBs/ metering equipments with hinged (bottle type) shutters, bottom removable gland plate with sufficient numbers of circular cable entry holes with cable glands of suitable size of cable & with suitable cable glands as per number of outgoings, prewired complete duly powder coated with 7 tank process with base frame made of angle iron 50 mm x 50 mm x 6 mm, legs 100 cm long, grouted 45 cm in PCC (1:3:6) type C-1 including brick masonary platform having openable apron on all three sides of panel 30 cm wide and all as specified and directed by Engr-in.charge, comprising of following :- |
| 7 | Bus bar: Bus bar suitable for 3 phase, 415 volts, 50 Hz, 4 wire system of rating 150 Amps made out of Aluminium bus bar strip of suitable size with coloured heat shrinkable sleeves in four colours (Red, yellow, blue and black) fixed on resin cast insulators including galvanised nuts, bolts and washers etc fitted with and including the following :-(i) Main incommer MCCB 63 Amp, 4 pole, Ics = 100% Icu - 01 Nos, (ii) Outgoing :- MCCB 40 Amp, 4 pole, Ics = 100% Icu - 01 Nos, (iii) MCB TPN 32 Amp - 02 Nos, (iv) MCB SPN 32 Amp - 02 Nos(v) Mult ifunction meter with LED display able to disply Voltage, Amp, PF, kWH,KW,KVA - 01 No class 1 with RS485 port with reqd CTs set -3 of suitable rating Please Enable Macros to View BoQ information |
| 8 | Bus bar: Bus bar suitable for 3 phase, 415 volts, 50 Hz, 4 wire system of rating 150 Amps made out of Aluminium bus bar strip of suitable size with coloured heat shrinkable sleeves in four colours (Red, yellow, blue and black) fixed on resin cast insulators including galvanised nuts, bolts and washers etc fitted with and including the following :-(i) Main incommer MCCB 63 Amp, 4 pole, Ics = 100% Icu - 01 Nos, (ii) Outgoing :- MCCB 40 Amp, 4 pole, Ics = 100% Icu - 01 Nos, (iii) MCB TPN 32 Amp - 02 Nos, (iv) MCB SPN 32 Amp - 02 Nos(v) Mult ifunction meter with LED display able to disply Voltage, Amp, PF, kWH,KW,KVA - 01 No class 1 with RS485 port with reqd CTs set -3 of suitable rating Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender