Tender For Repair/Replacement To Joinery Works Including Partitions, False Ceiling, Acp Works And Other Connected Works In Buildings Of Area A & B At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
80 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
25 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Joinery Works Including Partitions, False Ceiling, Acp Works And Other Connected Works In Buildings Of Area A & B At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames exceeding 1.5 Sqm but n exc 4.00 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed. |
| 3 | Taking down shutters exc 1 sq. m and not exc 2 sq. m each all as specified and directed. |
| 4 | Taking down shutters exc exc 2 sq. m each all as specified and directed. |
| 5 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 178 of SSR Part -II complete all as specified and directed. |
| 6 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page No. 174 of SSR Part -II complete all as specified and directed. |
| 7 | S&F plain, solid, 2nd hard wood class straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with the glue pinned at joints as in doors and windows with 2nd class hardwood complete all as specified and directed. |
| 8 | M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed. |
| 9 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) as providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 11 | S&F Flush shutters, solid core construction 30 mm thick with particle board core and plywood face panels, commercial type on both sides as in doors all as specified and directed. |
| 12 | S&F 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed. |
| 13 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed. |
| 14 | S&F 100 mm butt hinges heavy weight cold rolled mild steel and fixed complete all as specified and directed. |
| 15 | S&F aluminium alloy sliding door bolt 200 mm long with hasp and staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed complete all as specified and directed. |
| 16 | S&F 150 mm aluminium anodised barrell tower bolts of extruded section and fixed complete all as specified and directed. |
| 17 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised all as specified and directed. |
| 18 | S&F in repairs door closer hydraulically ( aluminium extruded section body) regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 19 | S&F in repairs floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 20 | S&F in repair 200 mm SS handles cast type polished bright complete all as specified and directed. |
| 21 | S&F in repair aluminium alloy sliding door bolt 250 mm long with hasp and staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed complete all as specified and directed. |
| 22 | Supply and fix in repair and stick solar control film 25 microns thick on glass panes as per manufacturer’s instructions complete all as specified and directed. |
| 23 | S&F heavy duty floor door spring Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed. |
| 24 | M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 25 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 26 | M&L for 4mm thick (3Nos of ply) Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and directed. |
| 27 | M&l for french polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wooden filler on new works with two or more coats complete all as specified and directed. |
| 28 | S&F powder coated Aluminium window frame 2/3 track outer frame 92 mm x 31.75 mm x1.50 mm and guide rail of section Nos size 92 x 31.75 x1.50mm and shutter section 40 x 18 x 1.550 mm sliding type including 5.0mm thick sheet glass of selected quality and fixed with rubber beading and aluminium hardware fittings including taking down existing one complete all as specified and directed. |
| 29 | S&F anodised aluminium DG-102 (anodised transperent or dyed to require shade according to IS 1868 with minimum anodic coaing of grade AC -15) of approved design / pattern , with approved standered scetion and fixed to the existing window frame with CP brass /stainless steel screw @200 mm ceneter to center ,WT 225gm/square feet including cutting the gril to propre opening size for fixig and operation of hanmdles and fixing approvedanodised aluminum stanedre scetion around the openings , all comete as per requirement and direction of Engr-in- Charge. |
| 30 | S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 150 mm long and 1 No brass mortice lock of 6 lever with key in duplicate. Shutter shall be partly glazed with 5 mm thick sheet glass ordianry quality and partly panelled with 12mm thick particle board, pre-laminated interior grade, prelaminated one side with decorative choice lamination, on other side balancing light grey lamination fixed with glazing clips, rubber beadings and aluminium beadings complete including taking down existing one.Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx)Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg/RM appx) Bottom rail: 150.00 x 2.20mm thick (2.376 Kg/RM appx) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg/RM appx) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg/RM appx) Please Enable Macros to View BoQ information |
| 31 | S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 150 mm long and 1 No brass mortice lock of 6 lever with key in duplicate. Shutter shall be partly glazed with 5 mm thick sheet glass ordianry quality and partly panelled with 12mm thick particle board, pre-laminated interior grade, prelaminated one side with decorative choice lamination, on other side balancing light grey lamination fixed with glazing clips, rubber beadings and aluminium beadings complete including taking down existing one.Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx)Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg/RM appx) Bottom rail: 150.00 x 2.20mm thick (2.376 Kg/RM appx) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg/RM appx) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg/RM appx) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender