Tender For Sub:-Fabrication Of Partition Plates Of Water Tank Body After Removal Of Broken Partition Plates And Fixing Partition Plate And Painting The Tank From Inside Of 03No Converted Watersprinklers,Dismantling/Repairing And Changing Of Water Pip
Tender Value
9.47 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
10 days left
EMD
11900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Singrauli → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sub:-Fabrication Of Partition Plates Of Water Tank Body After Removal Of Broken Partition Plates And Fixing Partition Plate And Painting The Tank From Inside Of 03No Converted Watersprinklers,Dismantling/Repairing And Changing Of Water Piping Network Of 02No Bws70kl Water Sprinklers, Fabrication Of Partition Plates Of Water Tank Body After Removal Of Broken Partition Plates And Fixing Partition Plate And Painting The Tank From Inside Of 01 No Bws70kl Namely Ws70001 And Repairing/Re-Welding, Co-Axial Line Boring Of Mounting Bracket Eye Of Ws-70001 Of Amlohri Project. Nit No:-Aml/Excv/Etn/Web-Nit/26-27/33 Dt:-28.09.2026
BOQ
| Sl. No. | Item Description |
| 1 | Scope of Work/Technical Specifications etc:-As per scope of work mentioned in NIT. |
| 2 | Job-A-Fabrication of partition plates of water tank body after removal of broken partition plates and fixing partition plate and painting the tank from inside of Converted water sprinkler |
| 3 | Fabrication of partition plates of water tank body after removal of broken partition plates and fixing partition plate and painting the tank from inside of Converted water sprinkler as per scope of work. |
| 4 | Providing GI pipe 80mm Diameter.(12 meter for each water sprinkler) |
| 5 | Making hole of 10 mm diameter in spray pipe.(300Nos in each water sprinkler) |
| 6 | Painting of water tank body from the inside.(600sq.ft for each water sprinkler) |
| 7 | Hiring charge of 01No welding machine.(20 days for each water sprinkler) |
| 8 | Job-B -Dismantling/repairing and changing of water piping network of BWS70kL water sprinkler |
| 9 | Dismantling/repairing and changing of water piping network of BWS70kL water sprinkler as per scope of work |
| 10 | Providing GI pipe 3\\" Diameter with elbows 3\\" and T joint 3\\"(50 meter for each water sprinkler) |
| 11 | Making hole of 10mm diameter in spray pipe.(300Nos in each water sprinkler) |
| 12 | Hiring charge of 01 No welding machine(8 days for each water sprinkler) |
| 13 | Job-C- Fabrication of partition plates of water tank body after removal of broken partition plates and fixing partition plate and painting the tank from inside of 01 No BWS70kL namely WS70001 |
| 14 | Fabrication of partition plates of water tank body after removal of broken partition plates and fixing partition plate and painting the tank from inside of 01 No BWS70kL namely WS70001 as per scope of work. |
| 15 | Painting of water tank body from the inside. |
| 16 | Hiring charge of 01No welding machine. |
| 17 | Job-D- Repairing/Re-welding, co-axial line boring of Mounting Bracket eye of WS-70001 |
| 18 | Cleaning of Oil Grease & Rust of Complete Job,Removal of water tank mounting bolt Water tanker mounting pin, Grease Hose, Both Steering tie rod, Steering Cylinder, center Liver , both side suspension, Radial Rod, etc. with complete attachment,Repairing / Re-welding of Mounting Bracket eye , Steering tie rod & steering cylinder (08 Nos),Bell Crank chassis eye housing (02Nos) ,Radial Rod mounting eye (08Nos) , Rear Suspension Mounting bracket eye (08Nos) differential Radius rod Mounting bracket eye housing (04 Nos),Tank Body Chassis Eye (02Nos) and Fitting of Grease Hose, Both front tie rod Steering Cylinder Center Liver , both side suspension, Radius Rod, Tie Rod, mounting bolt in tank body etc. with Complete attachment |
| 19 | Machining/Co-axial line boring of steering tie rod & steering cylinder (08 nos)Size of Housing,OD-90mm,ID-80mm,L-25mm,Volume for machining-22/7 x 1/4(9+8)x(9-8) x 2.5 cu.cm =33.39 cu.cm x08nos |
| 20 | Machining/Co-axial line boring of Bell Crank chassis eye housing (02nos) Size of Housing,OD-90mm,ID-80mm,L-80mm,Volume for machining-22/7 x 1/4(9+8)x(9-8) x 8 cu.cm =106.85 cu.cm x 2nos |
| 21 | Machining/Co-axial line boring of Tank Body chassis eye (02nos) Size of Housing,OD-105mm,ID-95mm,L-150mm,Volume for machining-22/7 x 1/4(10.5+9.5)x(10.5-9.5) x 15cu.cm =235.71 cu.cm x 2nos |
| 22 | Machining/Co-axial line boring of rear Suspention Mounting bracket eye (08nos) Size of Housing,OD-90mm,ID-80mm,L-60mm,Volume for machining-22/7 x 1/4(9+8)x(9-8) x 6 cu.cm =80.07cu.cm x 8nos |
| 23 | Machining/Co-axial line boring of differential Radius rod Mounting bracket eye housing (04 nos)Size of Housing,OD-90mm,ID-80mm,L-60mm,Volume for machining -22/7 x 1/4(9+8)x(9-8) x6cu.cm =80.14cu.cm x 4nos |
| 24 | Machining/Co-axial line boring of radial rod mouting bracket eye (08 Nos)Size of Housing,OD-90mm, ID-80mm, L-60mmVolume for machining-22/7 x 1/4(9+8)x(9-8) x 6cu.cm =80.14cu.cm x 08nos |
| 25 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender