Tender For Providing Ordinary Repair Works To The Office Cum Shopping Complex At Ellisnagar, Madurai For The Year 2026-2027
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
13 days left
EMD
2000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Ordinary Repair Works To The Office Cum Shopping Complex At Ellisnagar, Madurai For The Year 2026-2027
BOQ
| Sl. No. | Item Description |
| 1 | Ordinary Repair Work |
| 2 | Flyash bricks in cement mortor 1:5 ( One of cement and five of M sand) using Flyash bricks of size 230 x 110 x 70 mm having minimum average crushing strength of 50Kg/sqcm in foundation & basement including dewatering wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. |
| 3 | Removing all scaled / loosed ceiling plastering and to remove all loose dust by wire brush, mixing the master bond- sbr latex chemical with sulphate resistant cement in 1:1 ratio by weight and applying with brush on the prepared surface and allow to dry for 2-3 hrs before to apply regular finishing including cost of surface , mixing & applying etc., all chemical labour for preparation of complete. |
| 4 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works |
| 5 | Above Ground level |
| 6 | Below Ground level |
| 7 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 8 | 32mm dia PVC Tee |
| 9 | 32mm dia PVC Bend |
| 10 | 32mm dia PVC Coupler |
| 11 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 12 | 32 mm dia GM Gate valve |
| 13 | Painting and lettering of the existing office name board at the front of the Tamilnadu Housing Board office / Madurai, including cleaning the existing surface, surface preparation, painting, writing the office name and address, and all labour, materials, tools, scaffolding, transportation, and incidental charges, complete as directed by the Engineer-in-Charge. |
| 14 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 15 | Providing Infiltration well |
| 16 | Earthwork excavation above water level in light or sandy or clayey soils for manhole wells, infiltration wells, suction wells etc. including levelling the site with an initial lead of 10 metres. |
| 17 | Erection of Ring well below water level including all incidental charges using special tools and plants such as air compressor helmet etc. complete and including bailing out water. |
| 18 | Providing and filling 40 mm size hard broken stone/boulders in the infiltration well, consisting of clean, durable, hard and sound stones of approved quality, free from earth, clay, organic matter, dust and other deleterious materials |
| 19 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. |
| 20 | Dismantling clearing away and carefully stacking materials useful for re-use for any thickness floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs as directed by the departmental officers |
| 21 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 22 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 23 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 24 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 25 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 26 | Supplying and fixing in position best quality SS Heavy Duty Long Body Tap 15mm etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 27 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means |
| 28 | Comprehensive maintenance and servicing of 1.5 Ton split AC General service its including Indoor unit filter cleaning, Blower wheel cleaning, Drain tray and drain pipe cleaning, Outdoor unit condenser coil water jet cleaning, Refrigerant gas pressure checking, Cooling performance & temperature checking, Electrical connections, terminal tightening & voltage checking (Period for 1 month) complete complying with standard specification and as directed by the departmental officers (Period for 1 month) 01.10.2026 to 31.10.2026 |
| 29 | Comprehensive service and maintenance of 45 Kva Generator of Engine Oil (approx. 10 litres or as per OEM recommendation), Supply and replacement of Fuel Filter, Drain old engine oil and dispose of used oil in accordance with environmental guidelines, Check engine oil level, coolant level, battery electrolyte and terminals, Inspect air filter, fan belt, hoses, fuel lines and coolant lines, Check radiator, engine for leaks, mounting bolts and vibration, Start-up, operational testing and recording of engine parameters including labour charges for complete servicing, cleaning and testing etc., complete complying with standard specification and as directed by the departmental officers.(Period for 6 month) 01.10.2026 to 31.03.2027 |
| 30 | Supplying and fixing of AC Exhaust Fan 450mm (18”) Sweep (Heavy Duty) etc., complete as per standard specificatins and as directed by the departmental officers |
| 31 | Subtotal |
| 32 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender