Tender For Nctps-Ii - Civil Maintenance Circle - Civil Maintenance Division - Repair And Maintenance Works To Financial Controller Room, Accounts Section And Dsp Office Building
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
13 days left
EMD
8000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nctps-Ii - Civil Maintenance Circle - Civil Maintenance Division - Repair And Maintenance Works To Financial Controller Room, Accounts Section And Dsp Office Building
BOQ
| Sl. No. | Item Description |
| 1 | Removing and refixing the existing powder coated anodized aluminium partly Plain glazed partition works using the same materials and new materials such as rubber beedings, screws, aluminium angles etc., including cost of all materials, labour charges, all leads, lifts, T&P etc., complete and as directed by the Engineer incharge of the work |
| 2 | Dismantling the existing false ceiling with careful removal of board panels, and cutting the aluminium grid and stacking the dismantled materials complete and as directed by site Engineer incharge of the work. |
| 3 | Providing two legged scaffolding for False Ceiling, brick work, plastering and painting using 10-13 cm dia casuarina props, distance between two rows being 1.25m and spacing of posts being 2m in both rows, with two horizontal posts with 0.50m overlap on either side and braces at 2m c/c including logitudinal and transverse middle braces to step up and providing a platform with C.W.Planks of 40mm thick and 1m width etc., complete using coir and nails. |
| 4 | Brickwork in CM 1:5 using Fly ash bricks including cost of all materials, labour charges, lead, lift etc., complete. |
| 5 | Providing form work for concreting at all elevations and below GL to give medium smooth finish using steel shutters including cost of all materials, labour lead, lift etc. complete. |
| 6 | Providing, cutting, bending, tying and placing in position for an overlap of atleast 10 dia including cost of all materials, RTS rods, lead, lift, transporting, binding wire, welding operation etc. complete as instructed by the Engineer at site |
| 7 | Providing RCC 1:1.5:3 using O.P Cement and 12 to 20mm HBG metal including cost of all materials, lead, lift, labour charges, etc., complete. |
| 8 | Chipping the old damaged plastering and roughening the surface of walls including cost of all materials, labour, lead, lift, etc., complete. |
| 9 | Plastering with CM 1:3, 12mm thick including cost of all materials, T&P, lead, lift, curing etc., complete and as directed by site Engineer incharge of the work. |
| 10 | Providing, fixing in position of 8mm thick Calcium Silicate Board with Aluminium powder coated Tee and angle section (Saint cobain) and supporting the false ceiling using 6mm MS rods/G.I wire with required with hold fast at 0.60m intervals. The rates including cost of all materials, labour, lead, lift, T&P, etc., complete and as directed by the site Engineer incharge of the work. |
| 11 | Providing and fixing of false ceiling LED Light fitting complete including the cost of all materials, lead, lift, labour, T&P etc., complete and as directed by the Engineer Incharge of the work. |
| 12 | Providing single Phase, 230V supply sources including wiring, cable laying fixing of box 8 X 4 module with switches and sockets and extension of supply with suitable for Fan and light point as directed by the engineer at site. |
| 13 | Providing and fixing of wall mount fan including cost of all materials, T&P, lead, lift, etc., complete and as directed by the engineer at site. |
| 14 | Dismantling of existing damaged windows and devoluting the scrap materials to the store, including cost of all materials, cutting equipments, welding equipments, all leads, lifts etc., complete. |
| 15 | Providing and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. |
| 16 | Providing, fabricating and fixing in position powder coated anodized aluminium partly glazed single leaf door using aluminium box section of size 45 x 45 x 2 mm for top, middle and sides, 100 x 45 x 2mm for bottom, partly panelled with 9mm prelaminated board (Novapan or equivalent) and partly glazed with 5mm thick plain glass (saint gobain or equivalent) lock, 'D' type handles on both sides, hinges at top and bottom, door stopper, door closure etc., including the cost of all materials, labour, lead, lift, T & P, etc., complete and as directed by the Engineer incharge of the work. |
| 17 | Providing and fixing of Hydraulic Door closer including the cost of all materials, labour, lead, lift, T & P, etc., complete and as directed by the Engineer incharge of the work. |
| 18 | Providing & fixing in position of 25mm dia UPVC pipes of Ashirvad or equivalent quality with ISI monogram for water line including cost of pipe, fixing UPVC specials, cost of UPVC special materials, labour, lead, lift, etc., complete. |
| 19 | 25 mm dia UPVC pipe |
| 20 | Gate valve UPVC 25mm |
| 21 | Providing and fixing of UPVC push type / Normal tap of 20/15 mm dia, including cost of materials, labour, lead lift etc. complete. |
| 22 | Providing & fixing in position of 75 mm dia PVC pipes 6 kg. per cm2 of Finolex or equivalent quality with ISI monogram for drain pipe including cost of all materials, labour, lead, lift, etc., complete. |
| 23 | Providing and fixing of PVC Specials including cost of materials, labour, lead, lift, etc., complete as directed by the Engineer in charge at site. |
| 24 | PVC 75mm Elbow |
| 25 | PVC 75mm Door Elbow |
| 26 | PVC 75mm Coupling |
| 27 | Providing and fixing Anodised aluminium Towel rail 60cm long and 20 mm dia with Brackets, including cost of all labour charges, lead, lift etc., complete and as directed by the Engineer incharge of the work. |
| 28 | Providing and fixing of 10 litre capacity PVC Low Level Flusing Tank with all internal fittings including cost of materials, labour, lead, lift, etc., complete and as directed by Engineer incharge at site. |
| 29 | Providing and fixing of health faucet including cost of materials, labour, lead, lift, etc., complete and as directed by Engineer incharge at site. |
| 30 | Providing and fixing of EWC Double Flapped Seat and Seat Cover including cost of materials, labour, lead, lift, etc., complete and as directed by Engineer incharge at site. |
| 31 | Providing and fixing of waste hose including cost of materials, labour, lead, lift, etc. complete and as directed by Engineer incharge at site. |
| 32 | Providing synthetic red carpet 5mm thick of required size including cost of all materials, transporting, labour, lead, lift etc., complete. |
| 33 | Colour washing with two coats of interior emulsion paint including the cost of all materials, lead, lift, labour, T&P etc., complete and as directed by the Engineer Incharge of the work. |
| 34 | Colour washing with one coats of Exterior primer two coats with Exterior Emulsion paint for outside wall including cost of all materials, labour, lead, lift, T & P etc. complete and as directed by the Engineer at site. |
| 35 | Painting two coats of synthetic enamel paint for iron works after through scrapping of rust including cost of all materials, Labour, lead, lift, T&P etc. complete and as directed by the engineer at site. |
| 36 | Fabrication and fixing of Sunshade using MS Square tube,MS Flat for supporting angle including cost of cutting, welding and fixing in position, and one coat of red oxide primer and two coat of enamel paint, all materials, labour charges, all leads, lifts etc. complete. |
| 37 | Providing and fixing of Galvalume roof sheet with reputed make Galvalume sheet such as JSW or equivalent brand of 0.47 mm thick including cost of cutting, fixing in position, all materials, labour charges, all leads, lifts etc. complete. |
| 38 | Writing of letter using painting in outer wall with two coat of enamel paint for background and writing letter of size 15cm bordering allround including cost of paint, labour, lead, lift, etc., complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender