Tender For Repair Work In (Inspection House, Orai/Jalaun Transit Hostel) Non-Residencial Building In F.Y. 2025-26
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
1.23 Lakhs
Bank guarantee accepted
Document Fee
856
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Work In (Inspection House, Orai/Jalaun Transit Hostel) Non-Residencial Building In F.Y. 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Tile Work in Floor And roofs Laid in cement Mortar including stacking material Within 50 meters Lead For thickness of Tiles 10 mm To 25 mm. DSR (15.23.1) |
| 2 | Brick work with common burnt clay machine moulded perforated F.P.S.(non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). Above plinth level upto floor V leve DSR (6.31.2) |
| 3 | 12 mm thick cement plaster of mix 1:6 (cement 6 coarse sand) DSR (13.4.2) |
| 4 | 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived 6. from natural sources) DSR (4.1.8) |
| 5 | Reinforced cement concrete work in walls (any thickness). including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering. shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR (5.2.2) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR (5.22.1) |
| 7 | Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and 1S: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR (21.1.1.1) |
| 8 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angels 40x40x6 mm for diagonal braces DSR (10.5.1) |
| 9 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Kiln seasoned selected planks of sheesham wood 35 mm thick DSR (9.9.1.1) |
| 10 | Providing and laying (white/colored) Kajaria tiles, Ramano tiles flooring work 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing complete.in dedo 200x300 mm DSR (11.40) |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR (13.80) |
| 12 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats) DSR (13.41.1) |
| 13 | Indian sal wood wrought framed and fixed including simple mouldings, straight works as in Chaukhats, including supply of all material, labour T&P etc. required for proper completion of the work. DSR (9.1.2) |
| 14 | Supply and fixing of 32 mm thick flush doors commercial quality confirming to IS: 2202 Part 1(1983). DSR (9.21.1) |
| 15 | Supply and fixing galvanized mosquito proof heavy quality iron wire guage of expanded metal of heavy quality over window and including supply and fixing of Indian sal wood bettens 8 cm x 1 cm and including supply of necessary screw all material, labour, T&P etc. required for proper completion of the work. (As per Market Rate) |
| 16 | Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS: 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement: 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately) DSR (12.19.1) |
| 17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): DSR (21.1.1.2) |
| 18 | Supply and fixing of 50 mm dia GI pipe \\"B\\" class ISI marked DSR (18.12.6) |
| 19 | Supply and fixing of 25 mm dia GI pipe \\"B\\" class ISI marked DSR (18.12.3) |
| 20 | Supply and fixing of 20 mm dia GI pipe \\"B\\" class ISI marked DSR (18.12.2) |
| 21 | Supply and fixing of 15 mm dia GI pipe \\"B\\" class ISI marked DSR (18.12.1) |
| 22 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90` for 15mm outer dia pipe DSR (18.90A.1) |
| 23 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90` for 22mm outer dia pipe DSR (18.90A.2) |
| 24 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90`for 28mm outer dia pipe DSR (18.90A.3) |
| 25 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Sleeve/Slip Coupling/ Socket for 54mm outer dia pipe DSR (18.89A.6) |
| 26 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Sleeve/Slip Coupling/ Socket for 28mm outer dia pipe DSR (18.89A.3) |
| 27 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Sleeve/Slip Coupling/ Socket for 22mm outer dia pipe DSR (18.89A.2) |
| 28 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Sleeve/Slip Coupling/ Socket for 15mm outer dia pipe DSR (18.89A.1) |
| 29 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Equal Tee for 28mm outer dia pipe DSR (18.92A.3) |
| 30 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Equal Tee for 22mm outer dia pipe DSR (18.92A.2) |
| 31 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS: 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.Equal Tee for 15mm outer dia pipe DSR (18.92A.1) |
| 32 | Supply and fixing of 50 mm GI Union DSR (18.46.6) |
| 33 | Supply and fixing of 25 mm GI Union DSR (18.46.3) |
| 34 | Supply and fixing of 20 mm GI Union DSR (18.46.2) |
| 35 | Supply and fixing of 15 mm GI Union DSR (18.46.1) |
| 36 | Providing flanged joints to double flanged C.I./ D.I. pipes and specials. including testing of joints: 80mm diameter pipe DSR (18.30.1) |
| 37 | Providing flanged joints to double flanged C.I./ D.I. pipes and specials. including testing of joints: 100mm diameter pipe DSR (18.30.2) |
| 38 | Providing and fixing PTMT Ball cock of approved quality colour and meke complete with Epoxy coated aluminium rod with L P /H P H D plastic ball. 25 mm nominal bore weighing not less than 105 mm long. Weighing not less than 138 gms DSR (18..62.3) |
| 39 | Providing and fixing PTMT Ball cock of approved quality colour and meke complete with Epoxy coated aluminium rod with L P /H P H D plastic ball. 20 mm nominal bore weighing not less than 105 mm long. Weighing not less than 138 gms DSR (18.62.2) |
| 40 | Providing and fixing PTMT Ball cock of approved quality colour and meke complete with Epoxy coated aluminium rod with L P /H P H D plastic ball. 15 mm nominal bore weighing not less than 105 mm long. Weighing not less than 138 gms DSR (18.62.1) |
| 41 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR (18.48) |
| 42 | Supply & fixing of bross bib cock heavy quality 15 mm dia not less than 110 grams DSR (18.15.1) |
| 43 | Providing & fixing of bross bib cock heavy quality 15 mm nominal bore DSR (18.15.1) |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 90mm nominal dia pipe DSR (18.7.6) |
| 45 | Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints 150mm dia pipe DSR (18.30.4) |
| 46 | Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints 125mm dia pipe DSR (18.30.3) |
| 47 | Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints 80mm dia pipe DSR (18.30.1) |
| 48 | Providing and fixing C.I. sluice values (with cap) complete with bolts, nuts, rubber insertions etc. 100 mm diameter DSR (18.31.1.1) Class 1 |
| 49 | Higher charges of excavator in diffret work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender