Tender For Construction Of New Bus Stand At Madhiyahun, District-Jaunpur
Tender Value
8.47 Crore
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
16.94 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaunpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Bus Stand At Madhiyahun, District-Jaunpur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 2 | All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 5 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 6 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 7 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 8 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor: |
| 9 | With Chlorpyriphos E.C. 20% with 1% concentration |
| 10 | Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 11 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 13 | Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) |
| 14 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources :6 graded stone aggregate 20 mm nominal size derived from naturalsources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 16 | Foundations, footings, bases for columns |
| 17 | Centring and shuttering including strutting, propping etc. and removal of form for : |
| 18 | Foundations, footings, bases of columns, etc. for mass concrete |
| 19 | Suspended floors, roofs, landing, balconies and access platform. |
| 20 | Shelves ( Cast in situ) |
| 21 | Lintels,beams,plinth beams,girders, bressumer sand cantilevers. |
| 22 | Columns,Pillars, Piers, Abutments, Posts and Struts |
| 23 | Edges of slabs and breaks in floors and walls |
| 24 | Under 20 cm wide |
| 25 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Above Plinth Level . |
| 26 | Upto plinth level |
| 27 | Thermo Mechanically Treated bars. |
| 28 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Above Plinth Level |
| 29 | Above plinth level |
| 30 | Thermo Mechanically Treated bars. |
| 31 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. |
| 32 | (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). |
| 33 | All works upto plinth level |
| 34 | Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 35 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. |
| 36 | (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). |
| 37 | All works above plinth level upto floor V level |
| 38 | Concrete of M30 grade with minimum cement content of 350 kg/cum |
| 39 | PILE Work |
| 40 | Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). |
| 41 | Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). |
| 42 | Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing.Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge |
| 43 | Single pile above 50 tonne and upto 100 tonne Safe capacity |
| 44 | Initial test (Test Load 2.5 times the Safe capacity) |
| 45 | Routine test (Test Load 1.5 times the Safe capacity) |
| 46 | Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS :14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge. |
| 47 | Note :- The inclusion of the above item in the schedule of work shall be judiciously decided by the technical sanctioning authority, keeping in view the quality control, type of soil strata & importance of the project. |
| 48 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 49 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 50 | Brick work with common burnt clay F.P.S.( non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in: |
| 51 | Cement mortar 1:6 (1cement :6 coarse sand) |
| 52 | Half brick masonary with common burnt clay F.P.S.(non modular) bricks fo class designation 7.5 in supperstructure above plinth level up to floor V level. |
| 53 | Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 54 | Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. |
| 55 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 56 | Granite stone slab of colour black, Cherry/Ruby red |
| 57 | Area of slab upto 0.50 sqm |
| 58 | Area of slab over 0.50 sqm |
| 59 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 60 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 61 | Extra for providing lipping with 2nd class teak wood battens 25 mmminimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 62 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 63 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 64 | Frame size 50 x 100 mm |
| 65 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proofand fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 66 | 30 mm thick |
| 67 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 68 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 69 | 300x16 mm |
| 70 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 71 | 250x10 mm |
| 72 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 73 | 200x10 mm |
| 74 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 75 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 76 | Providing and fixing zinc alloyed (powder coated) Domal / Touch lock for Aluminium sliding window with necessary screws etc. complete. |
| 77 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. |
| 78 | 80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 79 | Providing and fixing ball bearing for rolling shutter |
| 80 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up Sliding 2 Track or 3 Track and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 81 | For Fixed portion |
| 82 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 83 | For shutters of doors, windows & ventilators including providing and fixing Sliding Rail / Roller and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 84 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 85 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 86 | Upto 5 mm depth and 5 mm width |
| 87 | Providing and fixing 12 mm thick toughened glass in door,windows, partition & Frame. |
| 88 | Providing and fixing Door lock for Frameless Door |
| 89 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 90 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 91 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 92 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 93 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 94 | Hot finished seamless type tubes |
| 95 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 96 | Providing and laying Full body homogenous vitrified slab infloor/jamb/dado/window/cooking platform etc. of minimum thickness 15 mm with water absorption less than 0.08% and conforming to IS:15622, of approved make the slab must be cut with the zero-chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, levelling system and rubber mallet for placing the slab gently and easily. Size of the tile 800x2600mm & 3000x800mm of all colours and shades. Premium large format ceramic slabs of size 800x2600 mm and 15 mm thickness, matt finish, manufactured using advanced CONTINUA+ 2000 continuous compaction system ensuring superior density, dimensional accuracy and consistent quality in large- format slabs, and produced using advanced FCS (Fast Cooling/Firing System) firing technology for enhanced mechanical performance, durability and structural integrity, having minimum breaking strength and conforming to applicable international standards for heavy-duty porcelain/ceramic slabs (breaking strength >6,000 N), of. |
| 97 | approved make, brand and manufacturer, having high load-bearing capacity with excellent resistance to impact and mechanical stress, low porosity, dimensional stability, weather resistance and stain resistance, suitable for both interior and exterior applications including wall cladding, façades, countertops, worktops, commercial spaces and high-traffic areas, laid/fixed on suitable base/bedding as per manufacturer’s specification and direction of Engineer-in-Charge, jointing with grey cement slurry/approved adhesive including grouting the joints with matching pigments etc., complete in all respects. |
| 98 | approved make, brand and manufacturer, having high load-bearing capacity with excellent resistance to impact and mechanical stress, low porosity, dimensional stability, weather resistance and stain resistance, suitable for both interior and exterior applications including wall cladding, façades, countertops, worktops, commercial spaces and high-traffic areas, laid/fixed on suitable base/bedding as per manufacturer’s specification and direction of Engineer-in-Charge, jointing with grey cement slurry/approved adhesive including grouting the joints with matching pigments etc., complete in all respects. |
| 99 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 100 | Size of Tile 600x600 mm |
| 101 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 102 | Size of Tile 600x600 mm |
| 103 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 104 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 105 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : |
| 106 | Light shade pigment using white cement |
| 107 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colour and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 108 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 109 | In 75x75 mm deep chase |
| 110 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mminterval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, |
| 111 | as per specifications, drawings and as directed by Engineer-in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. |
| 112 | 0.91 mm, Aluminium Colour coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000 mm. |
| 113 | Providing and fixing of Pre-coated colour or mill finish AluminiumRoofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]. For colour, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50 mm with 3 mm thick EPDM seal and SS plain washer complete : |
| 114 | Precoated/mill finish aluminium Ridges plain (500- 600mm) |
| 115 | Precoated/mill finish aluminium Gutter (600 mm over all girth) |
| 116 | 12 mm cement plaster of mix : |
| 117 | 1:6 (1 cement: 6 coarse sand) |
| 118 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 119 | 1:6 (1 cement: 6 coarse sand) |
| 120 | 6 mm cement plaster of mix : |
| 121 | 1:3 (1 cement : 3 fine sand) |
| 122 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 123 | New work (two or more coats) over and including waterthinnable priming coat with cement primer having VOC contentless than 50 gram/litre |
| 124 | Finishing walls with textured exterior paint of required shade : |
| 125 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 126 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 127 | Two or more coats on new work |
| 128 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 129 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 130 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: |
| 131 | Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. |
| 132 | Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs |
| 133 | After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge. |
| 134 | Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. |
| 135 | The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge. |
| 136 | With average thickness of 120mm and minimum thickness at khurra as 65 mm. |
| 137 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 138 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 139 | W.C. pan with ISI marked white solid plastic seat and lid |
| 140 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 141 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 142 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 143 | Providing and fixing toilet paper holder : |
| 144 | C.P. brass |
| 145 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 146 | a) 15 mm nominal bore |
| 147 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 148 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 149 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 150 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 151 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. |
| 152 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 153 | Providing & fixing S.S. Towel ring round with round flange |
| 154 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 155 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms. |
| 156 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 157 | Kitchen sink without drain board |
| 158 | 610x510 mm bowl depth 200 mm |
| 159 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality& make as approved by Engineer in charge. |
| 160 | 15 mm nominal dia |
| 161 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 162 | Providing & fixing S.S. Towel rail in bathing area. |
| 163 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 164 | 150 mm diameter |
| 165 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 166 | 15 mm nominal bore |
| 167 | Providing and fixing unplasticised PVC connection pipe with brass unions. |
| 168 | 45 cm length |
| 169 | 15 mm nominal bore |
| 170 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 171 | 15 mm nominal bore |
| 172 | Providing & fixing S.S. Grating with cockroack trap. |
| 173 | INTERNAL SOIL, WASTE & RAIN WATER DRAINAGE SYSTEM |
| 174 | Providing and fixing UPVC pipes complete with fittings including cutting and making good the walls etc. |
| 175 | UPVC SWR Single socket pipe type-B 40 mm dia |
| 176 | UPVC SWR Single socket pipe type-B 100 mm dia |
| 177 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 178 | a) 100mm inlet & 100mm outlet. |
| 179 | Single tee without door |
| 180 | 100 mm dia |
| 181 | Bend 87.5 degree |
| 182 | 40 mm dia |
| 183 | 100 mm dia |
| 184 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 185 | 75 mm |
| 186 | 110 mm |
| 187 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. |
| 188 | Coupler |
| 189 | 110 mm |
| 190 | Single tee without door |
| 191 | 110x110x110 mm |
| 192 | Bend 87.5 degree |
| 193 | 110 mm Bend |
| 194 | Shoe (Plain) |
| 195 | 110 mm Shoe |
| 196 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 197 | 110 mm |
| 198 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. |
| 199 | INTERNAL WATER SUPPLY SYSTEM |
| 200 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 201 | Concealed work including cutting chases and making good the walls etc. |
| 202 | 15 mm nominal dia pipes |
| 203 | 20 mm nominal dia pipes |
| 204 | 25 mm nominal dia pipes |
| 205 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 206 | Internal work-Exposed on wall |
| 207 | 20 mm nominal dia pipes |
| 208 | 25 mm nominal dia pipes |
| 209 | 32 mm nominal dia pipes |
| 210 | 40 mm nominal dia pipes |
| 211 | 50 mm nominal dia pipes |
| 212 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 213 | 20 mm nominal bore |
| 214 | 25 mm nominal bore |
| 215 | 32 mm nominal bore |
| 216 | 40 mm nominal bore |
| 217 | 50 mm nominal bore |
| 218 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 219 | EXTERNAL SEWERAGE & RAIN WATER DRAINAGE SYSTEM |
| 220 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. |
| 221 | All kinds of soil |
| 222 | Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. |
| 223 | Providing and laying Non pressure NP2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. |
| 224 | 150 mm dia. R.C.C. pipe |
| 225 | 250 mm dia. R.C.C. pipe |
| 226 | 300 mm dia. R.C.C. pipe |
| 227 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : |
| 228 | 150 mm. dia. Pipes |
| 229 | 250 mm. dia. Pipes |
| 230 | 300 mm. dia. Pipes |
| 231 | Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 232 | 180x150 mm size P type |
| 233 | With Sewer bricks conforming to IS : 4885 |
| 234 | Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : |
| 235 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 236 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 237 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 238 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 239 | Extra depth for circular type manhole 0.91m internal dia (at bottom)beyond 0.91 m to 1.67 m |
| 240 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 241 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : |
| 242 | 0.91 m deep with S.F.R.C. cover and frame (heavy duty,HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : |
| 243 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 244 | Extra depth for circular type manhole 0.91m internal dia (at bottom)beyond 0.91 m to 1.67 m |
| 245 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 246 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 247 | EXTERNAL WATER SUPPLY & IRRIGATION SYSTEM |
| 248 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 249 | External work |
| 250 | 25 mm nominal dia pipes |
| 251 | 32 mm nominal dia pipes |
| 252 | 40 mm nominal dia pipes |
| 253 | 50 mm nominal dia pipes |
| 254 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 255 | 25 mm nominal bore |
| 256 | 32 mm nominal bore |
| 257 | 50 mm nominal bore |
| 258 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 259 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 260 | RAIN WATER HARVESTING PIT (MODULAR) |
| 261 | SITC of Rainwater Harvesting Pit of required capacity including excavation, supply & fixing of modular tank units/recharge media, geotextile wrapping, multi-stage filtration unit, UPVC/HDPE piping (110–160 mm), civil works, chamber covers, backfilling, testing and commissioning complete as per specifications and direction of Engineer-in-Charge. |
| 262 | 50 CUM capacity |
| 263 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. |
| 264 | All types of soil |
| 265 | 300 mm dia |
| 266 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. |
| 267 | 150 mm nominal size dia |
| 268 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 269 | 150 mm nominal size dia |
| 270 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 271 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 272 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: |
| 273 | 150 mm dia |
| 274 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. |
| 275 | 150 mm clamp |
| 276 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). |
| 277 | 150 mm dia |
| 278 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 279 | 50 mm dia nominal bore |
| 280 | Supply & installation of 300 LPM , 50 m Head , 5 H.P Submersible Pump for clear water pumping suitable to operate on 415+5% volt 50 Hz, 3 Phase A.C supply (As per IS 8034-1989) |
| 281 | FIRE FIGHTING PUMPS AND ACCESSORIES |
| 282 | [A] Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)[B] Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520[C] Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325[D] M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.[E] Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 283 | 900 lpm at 35 m Head |
| 284 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 285 | 25 mm. Dia |
| 286 | 80 mm. Dia |
| 287 | 100 mm. Dia |
| 288 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 289 | Single headed Gunmetal |
| 290 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 291 | 80 mm dia |
| 292 | 100 mm dia |
| 293 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 294 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 295 | 100 mm dia |
| 296 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
| 297 | 100 mm dia |
| 298 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : |
| 299 | Gun Metal |
| 300 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. |
| 301 | 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 |
| 302 | 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. |
| 303 | Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 304 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 305 | Gun metal |
| 306 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 307 | 2 way-100 mm dia M.S. Pipe |
| 308 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 309 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 310 | Pressure Gauge |
| 311 | Fireman Axe |
| 312 | Supply of ABC (Stored Pressure type) duly ISI marked conforming to IS: 15683:2006 squeeze grip release valve, discharge pipe locking arrangement, pressure gauge, operation manual, and bracket. Suitable for wood, paper, cloth, plastic, diesel, petrol, paint, LPG, CNG, PNG, electrically started fire. |
| 313 | Capacity 4 Kg. |
| 314 | Providing & fixing ISI marked (IS:2878) portable CO2 type fire extinguisher type 4.5 kg capacity. Including valve, discharge hose of not less than 10 mm dia & 1 M long complete in all respects including initial filled with CO2 gas confirming to IS:307-1966 & filled to a filling rate of not more than 0.667 and wall suspension bracket. |
| 315 | Providing & fixing Galvanized Mild Steel Fire Buckets conforming to IS 2546 10 Litre with painted Mild Steel frame as per approval of Engineer-in-charge.Set of 3 buckets filled with sand hanged on the frame to be placed at strategic locations. |
| 316 | ELECTRICAL WORKS |
| 317 | Required clearances from the concerned statutory authorities are in the scope of this work.Statutory fees paid will be reimbursed on production of original receipts in the name of Client |
| 318 | Please follow the GRIHA / Indian Green Building Council Norms for luminosus efficacy, lighting levels, illumination level etc.without extra cost. |
| 319 | COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT |
| 320 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 321 | Group A |
| 322 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 323 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 324 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 325 | SUBMAIN AND CONTROL WIRING |
| 326 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 327 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (For Light Ckt Wiring/Computer Points/ Split AC Units) |
| 328 | 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 329 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 330 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire (From Panel to DB ) |
| 331 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 332 | 20 mm |
| 333 | 25 mm |
| 334 | 32 mm |
| 335 | 40 mm |
| 336 | 50 mm |
| 337 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 338 | 5/6 amps switch |
| 339 | 2 way 5/6 amps switch |
| 340 | 15/16 amp switch |
| 341 | 3 pin 5/6 amp socket outlet |
| 342 | 6 pin 15/16 amp socket outlet |
| 343 | Telephone socket outlet |
| 344 | TV antenna socket outlet |
| 345 | HDMI Port |
| 346 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 347 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 348 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. |
| 349 | 1 or 2 Module (75mmX75mm) |
| 350 | 3 Module (100mmX75mm) |
| 351 | 4 Module (125mmX75mm) |
| 352 | 6 Module (200mmX75mm) |
| 353 | 8 Module (125mmX125mm) |
| 354 | 12 Module (200mmX150mm) |
| 355 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch and 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 356 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos 3 pin 5/6 amps modular socket outlet and 1 No 5/6 amps modular switch and 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 357 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 358 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 359 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.(For AC Units) |
| 360 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 361 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 362 | Group A |
| 363 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. |
| 364 | Supplying, installation, testing and commissioning of recess mounting, TPN TIER Per Phase Isolation , 415 volts, prewired, distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of tinned copper insulated bus bar, common neutral link, earth bar, din bar for mounting MCBs, detachable gland/kNosck out plate and with built in loose wire box and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FRLS PVC insulated copper conductor up to the terminal connector/neutral link and ready for installation of following ways complete with connections, testing and commissioning etc. as required. DB's shall have a dedicated Earthing link fixed on insulated supports, which will be in addition to body earth link. DB shall be designed with provision for 8 module as incomer, 2 module as subincomer & SP MCBs as outgoing as per requirement. Inside each DB, a DB chart is to be fixed indicating all out going circuits. |
| 365 | Notes:- |
| 366 | 1.MCBs shall be minimum 10 KA breaking capacity (Type –C) |
| 367 | 2. Blanking Plates shall be included in scope of work. |
| 368 | 3. DB shall be of standard readymade type as per catalouge Nos from approved manufacturers as indicated in preferred makes of material. |
| 369 | 4. Wire way & cable end box also end & locking plates shall be provided. |
| 370 | All Electrical component should have IS mark |
| 371 | 12 way, IP43, DD DB |
| 372 | 8 way, IP43, DD DB |
| 373 | 4 way, IP43, DD DB |
| 374 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 375 | Single pole |
| 376 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 377 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 378 | 40 amps |
| 379 | 63 amps |
| 380 | 100 amps |
| 381 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 382 | 25 amps |
| 383 | 40 amps |
| 384 | 63 amps |
| 385 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 386 | Supply, Installation, Testing and Commisioning of LED in 15 W Surface / Recess Mounted Downlighter Round Shape with minimum system lumen efficacy of 100 lm/W and system lumen 1200 lm with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 ,THD, including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. |
| 387 | Supply, Installation, Testing and Commisioning of IP40 LED fixture 24 W with Surface Mounted 4 Feet with Polycarbonate diffuser with aluminium housing having minimum system lumen efficacy of 125 lm/W with minimum system lumen output 5000 lumens with P.F.>0.95 with THD,including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. |
| 388 | Supply, Installation, Testing and Commisioning of LED fixture 600mmX600mm decorative type 24 W+/- 1W Recess or Suspension Mounted Fixture having system efficacy of minimum 90 lm/W Light Light engine and diffuser only on the edges and hollow in between with Drop Down HET PMMA diffuser with extruded aluminium housing. with P.F.>0.95 with THD,including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. |
| 389 | Supply, Installation, Testing and Commisioning of LED fixture 600mmX600mm decorative type 36 W+/- 1W Recess or Suspension Mounted Fixture having system efficacy of minimum 90 lm/W Light Light engine and diffuser only on the edges and hollow in between with Drop Down HET PMMA diffuser with extruded aluminium housing. with P.F.>0.95 with THD,including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. |
| 390 | Supply, Installation, Testing and Commisioning of LED fixture Surface Square 300 x 300 mm 12 W Recess or Suspension Mounted Fixture having system efficacy of minimum 90 lm/W ,Die cast aluminum housing, High performance di user for better light transmission and pure effect with P.F.>0.95 with THD,including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. |
| 391 | Supply, Installation, Testing and Commisioning of LED fixture Surface Square 170 x 170 mm 18 W+/- 1W Recess or Suspension Mounted Fixture having system efficacy of minimum 90 lm/W ,Die cast aluminum housing, High performance di user for better light transmission and pure effect with P.F.>0.95 with THD,including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd. |
| 392 | Supplying, Installation, Testing & Commissioning of mirror light integrated IP20 Batten Led fixture 600 mm 20 W +/- 1W with Surface Mounted with aluminium housing and Polycarbonate diffuser,minimum system efficacy of 100lm/W with P.F.>0.95 with THD<20% ,CCT6500 K,CRI 80,Surge Protection 2 Kv, IP20.The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 270V including making suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required complete as reqd. |
| 393 | Supplying, Installation, Testing & Commissioning of mirror light integrated IP20 Batten Led fixture 600 mm 40 W +/- 1W with Surface Mounted with aluminium housing and Polycarbonate diffuser,minimum system efficacy of 100lm/W with P.F.>0.95 with THD<20% ,CCT6500 K,CRI 80,Surge Protection 2 Kv, IP20.The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 270V including making suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required complete as reqd. |
| 394 | Supply, Installation, Testing and Commisioning of IP65 Bulkhead led fixture 10 W +/- 1 W Wall Mounted with minimum system lumen efficacy of 100 lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 with THD,including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd.C |
| 395 | Supply, Installation, Testing and Commisioning of Wall Bracket led fixture 10 W +/- 1 W Wall Mounted with minimum system lumen efficacy of 100 lm/W and P.F.>0.95 with THD,including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd.C |
| 396 | LIGHTING CONTROLS |
| 397 | Supplying, installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor with day light dimming (lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high performance, regulating programmable type, suitable for connected load upto 10Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. |
| 398 | Supplying, Installation, Testing & Commissioning of 300 mm sweep, 900 rpm heavy duty exhaust fans with suitable louvers / bird screen protection and all accessories complete with Aerodynamically designed & Balanced Blade, Dynamically balanced impellers for smooth & vibration-free operation,Pre-lubricated double ball bearing for maintenance free running suitable for operation on single phase AC supply complete connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required as reqd. |
| 399 | Supplying, Installation, Testing & Commissioning of 250 mm sweep fresh air ventilating fan with aerodynamically designed & balanced blades suitable for operation on 230 v single phase AC supply complete connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required as reqd.with all accessories as required |
| 400 | BLDC FANS & WALL FANS |
| 401 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos blades, 30 cm long down rod, 2 Nos caNospies, shackle kit, safety rope, copper winding, Power Factor Nost less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 402 | 1200 mm sweep |
| 403 | Supply and Installatoon of 2.5 m dia , 6 blades HVIS fan Havels Make or Eqv. Complete in all respects. |
| 404 | Supply and installation of wall fan complete in respects 400 mm dia |
| 405 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 406 | 10 sq. mm 4 core |
| 407 | 16 sq. mm 4 core |
| 408 | 25 sq. mm 3-1/2 core |
| 409 | 35 sq. mm 3-1/2 core |
| 410 | 50 sq. mm 3-1/2 core |
| 411 | 95 sq. mm 3-1/2 core |
| 412 | 120 sq. mm 3-1/2 core |
| 413 | 150 sq. mm 3-1/2 core |
| 414 | 185 sq. mm 3-1/2 core |
| 415 | 240 sq. mm 3-1/2 core |
| 416 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 417 | 4 X 10 sq. mm (25mm) |
| 418 | 4 X 16 sq. mm (28mm) |
| 419 | 3.5 X 25 sq. mm (28mm) |
| 420 | 3.5 X 35 sq. mm (32mm) |
| 421 | 3.5 X 50 sq. mm (35mm) |
| 422 | 3.5 X 95 sq. mm (45mm) |
| 423 | 3.5 X 120 sq. mm (45mm) |
| 424 | 3.5 X 150 sq. mm (50mm) |
| 425 | 3.5 X 185 sq. mm (57mm) |
| 426 | 3.5 X 240 sq. mm (62mm) |
| 427 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. |
| 428 | 100 mm Dia |
| 429 | 150 mm dia |
| 430 | 250 mm dia |
| 431 | 300 mm dia |
| 432 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. |
| 433 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 434 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 435 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 436 | 160 mm dia (CD-160 mm & ID-135 mm nominal) |
| 437 | Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. |
| 438 | CABLE TRAYS |
| 439 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 440 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 441 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 442 | 200 mm width X 50 mm depth X 1.6 mm thickness |
| 443 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 444 | Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. CAT-AAA |
| 445 | Supply, Installation, Testing and Commisioning of 120 W LED street Light luminaire, cradle mounted, Al Pressure Die cast Housing having minimum system lumen efficacy of 110 lm/W with minimum system lumen output of 4400 lumens. The luminaire shall have IP66 protection with Beam angle of 60 degree, CCT of 5700K and CRI 80. The LED shall be compliant with Useful L70 life of >50000 Hrs.Driver efficiency should be 85%, THD0.95 in input voltage range of 140V to 300V (nominal rated voltage – 240V) with 5 KV internal surge protection and 10KV External protection |
| 446 | SITC of SMD 200W LED, IP66, IK07 protection Floodlight fixture with System efficacy of 120 lm/W (24000 lumens). Luminaire shall be made up of die cast Aluminium housing with PC lens diffuser. Luminaire shall be designed with street optic LENS for uniform light distribution. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be potted, Integrated type, Multistage, Isolated, APFC Constant Current operated driver with range 140-300V AC Driver Efficiency > 85% & 5 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Similar to Wipro Make : LF40-272-060-57-HE or Equivalent to Trilux or Regent |
| 447 | Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100mm, Bottom dia 200 mm and base plate 16mm thik) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. |
| 448 | Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100mm, Bottom dia 200 mm and base plate 16mm thik) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. |
| 449 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A |
| 450 | Supply, Installation, testing and commissioning of 2 TR Hi-Wall BEE rated 5 star invertor technology split Air-Conditioners with full function cordless remote with auto restart feature, with indoor and outdoor units, gas charge, copper condensor coils and copper cooling coils, company provided refrigerant pipe, suitable for 230V +10% of 50 Hz, single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with rotary / Scroll compressor. |
| 451 | Supply, Installation, testing and commissioning of 1.5 TR Hi-Wall BEE rated 5 star invertor technology split Air-Conditioners with full function cordless remote with auto restart feature, with indoor and outdoor units, gas charge, copper condensor coils and copper cooling coils, company provided refrigerant pipe, suitable for 230V +10% of 50 Hz, single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with rotary / Scroll compressor. |
| 452 | Supply and installation of robust MS angle,MS flat fabricated floor/wall mounting stand suitable for outdoo runits of Split ACs, painted with one coat of primer and two coats of synthetic enamel outdoor typepaint including its grouting and making good of damages, complete in all respects. |
| 453 | Supply, installation, testing and commissioning of insulated copper refrigerant piping set (suction and discharge) duly insulated by nitrile rubber for 2/ 1.5/ 1TR HI-wall split AC. Size(thickness and diameter) of both Copper pipes should be as per recommendation of AC manufacturer's technical specification. |
| 454 | Supplying, Installation, Testing and commissioning of rigid UPVC drain Piping of size 25 mm dia with elbows, T- joints, sockets duly insulated with nitrile rubber insulation with adequate supports as per specifications and instructions of Engineer‐in charge i/c Charges for the work of brick and surface cutting / chiseling for the purpose of recessed PVC drain /copper pipe and making the wall in good condition by cement plaster etc as per site requirement including all raw material |
| 455 | Supply and fixing of 2.5 sq mm 4 core electrical cable 1.1KV grade flexible multistand with PVC conduit pipe 25 mm with accessories and fittings for installation of Split AC units as per site requirement. |
| 456 | WATER COOLER & RO SYSTEM |
| 457 | Supplying, installation, testing & commissioning of 80 Ltrs. water storage capacity & 40 Ltrs/hr. cooling capacity full stainless steel body heavy duty water cooler, 4 Nos. taps complete with copper wound rotary compressor, Drain pipe etc. including mechanical and electrical connections with suitable size 3 core copper wire and plug complete as required. |
| 458 | Supply, Installation, Testing and Commisioning of Water Filter/ Purifier UV Suitable for Online Purification with following specificationsPre FilterPre Carbon block filterPost Carbon block filterFully automatic operation with auto-on and Auto–Off facility |
| 459 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 460 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 461 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 462 | With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 |
| 463 | Construction of dry lean cement concrete sub base over a prepared subgrade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in- charge. |
| 464 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. |
| 465 | Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer |
| 466 | Providing and fixing in position pre-moulded joint filler in expansion joints. |
| 467 | Providing and filling in position rubberized bitumen hot sealing compound for sealing expansion joints in roads / pavements all complete as per direction of the Engineer -in - charge. |
| 468 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 469 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 470 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 471 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 472 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 473 | With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 |
| 474 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 475 | 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. |
| 476 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 477 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 478 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 479 | construction of boundary wall with grill(as per dpr) |
| 480 | construction of boundary wall (As per dpr) |
| 481 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 482 | HORTICULTURE & LANDSCAPE |
| 483 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 484 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 485 | Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm |
| 486 | Fine dressing of the ground |
| 487 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.. |
| 488 | Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). |
| 489 | With grass Turf |
| 490 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge |
| 491 | SUPPLY OF PLANTS |
| 492 | Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. |
| 493 | Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. |
| 494 | Providing and Displaying Washingtonia filifera palm plant well developed 90 to 105 cm ht. having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot as per direction of the officer-in-charge. |
| 495 | Providing and Displaying Phoenix roebelenii palm plant well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in-charge. |
| 496 | Providing and Displaying Bismarkia Palm plant 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 497 | Providing and Displaying Cycus cirsnallis plant well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 498 | Providing and Displaying Topiary plant of Ficus Nuda well developed with fresh & healthy foliage from Top to Bottom with single piller 75 to 90 cm spread, 195 to 210 cm ht. in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge. |
| 499 | Supply and stacking of Grevillea robusta (Silver Oak) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-incharge. |
| 500 | Supply and stacking of Plumeria acutifolia plant of height 150-165 cm. with 3-4 branches in big size HDPE bag as per direction of the officer-in-charge |
| 501 | Supply and stacking of Chorisia speciosa plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 502 | Supply and stacking of Polyalthia pendula (Ashok Pendula) plant of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-incharge. |
| 503 | Provind laying and making kerb channel 30 cm wide and 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources :6 graded stone aggregate 20 mm nominal size derived from naturalsources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 504 | Construction brick masonry chamber for underground c.i inspection chamber and bends with bricks in cement mortar 1:4 (1 cement :4 coarse sand)c.i cover with frame ( light duty )455*610 mm internal dimerions total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg) R.C.C top slab with 1:1.5:3 mix (1 cement :1.5 fine sand :3 graded stone aggregate 20mm nominal size |
| 505 | Inside dimensione 455*610mm and 45cm deep for single pipe |
| 506 | With common burnt clay F.P.S (non modular ) brick of class designation 7.5 |
| 507 | GST AS PER APPLICABLE 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender