Tender For Repair & Maintenance Of Dharaikuri Bunglow In Ps-Maynaguri & Dt-Jalpaiguri.
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
12 days left
EMD
9683
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Dharaikuri Bunglow In Ps-Maynaguri & Dt-Jalpaiguri.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting uprooting and clearing jungles including srubs,water weeds,bushes,trees,plants,upto 30 cm.girth including removing as directed by Engineer-in-charge. |
| 2 | Plain and finished timber planks in partition, shelves etc. fitted and fixed complete as per design (butt joints) in ground floor.(i) 12mm thick planks(c) other Local wood |
| 3 | Wood work in posts, post plates, rafters, battens, truss members, purlins etc.fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.)(The quantum should be corrected upto three decimals)(i) Sal : Siliguri. |
| 4 | Item No:-1 /Page 2/ S.&.P.Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately.) (A) For Exposed Work 15 mm dia. light quality |
| 5 | 20 mm dia. light quality |
| 6 | 25 mm dia. light quality |
| 7 | 32 mm dia. light quality |
| 8 | 40 mm dia. light quality |
| 9 | 50 mm dia. light quality |
| 10 | Supplying, fitting and fixing in position G.I.pipes of TATA make for underground works with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, short piece etc. including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately.) 20 mm dia. light quality |
| 11 | 25 mm dia. light quality |
| 12 | 32 mm dia. light quality |
| 13 | 40 mm dia. light quality |
| 14 | 50 mm dia. light quality |
| 15 | Supplying, fitting and fixing shower of approved brand and make.Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar). |
| 16 | Polythene of approved make(i) 15 mm X 125 mm |
| 17 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). |
| 18 | 40 mm |
| 19 | 32 mm |
| 20 | 25 mm |
| 21 | Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar) |
| 22 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar). |
| 23 | Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) i) 15 mm |
| 24 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work15 mm |
| 25 | 25 mm |
| 26 | 40 mm |
| 27 | Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes25 mm dia. light quality |
| 28 | 32 mm dia. light quality |
| 29 | 40 mm dia. light quality |
| 30 | PLabour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.)20 mm |
| 31 | 40 mm |
| 32 | 50 mm |
| 33 | Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately)15 mm |
| 34 | 25 mm |
| 35 | 40 mm |
| 36 | Labour for fitting and fixing G.I. specials including cost of jointing materials.PlugUpto 25 mm dia. |
| 37 | Above 25 mm upto 50 mm dia. |
| 38 | socket,reducing socket Upto 25 mm dia. |
| 39 | Above 25 mm upto 50 mm dia. |
| 40 | Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple.Upto 25 mm dia. |
| 41 | Above 25 mm upto 50 mm dia. |
| 42 | Labour for dismantling G.I. pipe with fittings.15 mm |
| 43 | 25 mm |
| 44 | 40 mm |
| 45 | 50 mm |
| 46 | Refixing G.I. pipe with fittings after cleaning where necessary.15 mm |
| 47 | 25 mm |
| 48 | 40 mm |
| 49 | 50 mm |
| 50 | Removing chokage in G.I. pipe including cleaning pipe.15 mm |
| 51 | 25 mm |
| 52 | 40 mm |
| 53 | 50 mm |
| 54 | Renewing brass spindle and valve of stop cock / bib cock / push cock / pillar cock.Upto 40 mm dia. |
| 55 | 50 mm dia. |
| 56 | Dismantling and refixing bib cock or stop cock.15 mm |
| 57 | Renewing brass spindle and valve of stop cock / bib cock / push cock / pillar cock.32mm |
| 58 | 40 mm |
| 59 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 60 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer |
| 61 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. |
| 62 | Labour for lowering plastic water storage tank and stacking in places as directed.(i) Upto 1500 litre capacity(a) From 1st floor to G.L. |
| 63 | Dewatering and repairing G.I. tank above 1000 litre and upto 2000 litre capacity with G.I. washer, bolts and nuts as necessary. |
| 64 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.ii) 550 mm X 400 mm size |
| 65 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(a) Sink onlyi) 530 mm X 430 mm x 180 mm |
| 66 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.ii) 450 mm long |
| 67 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.i) 600 mm long |
| 68 | Supplying, fitting and fixing pillar cock of approved make.d) Polythene Piller Cock (EMCO / ATLAS or equivalent)i) 15 mm |
| 69 | Refixing wash basin with brackets with or without waste fittings. |
| 70 | Refixing sink with brackets with or without waste fittings.i) Upto 450 mm length |
| 71 | Cleaning wash basin/ sink with acid. |
| 72 | Supply of UPVC pipes(B type) & fittings conforming to IS-13592-1992Single Socketed 3 Meter Length110 mm |
| 73 | Fittings, Plain Tee , 110 mm |
| 74 | Door Tee, 110 mm |
| 75 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. Under ground110 mm |
| 76 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).(i) 580mmx440 mm |
| 77 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mm |
| 78 | Supplying, fitting and fixing liquid soap container.b) PTMT(prayag or equivalent) |
| 79 | Supplying, fitting and fixing towel rail with two brackets.(ii) 25 mm dia. and 600 mm long |
| 80 | Cleaning E.P. or Anglo-Indian W.C. with acid. |
| 81 | Cleaning urinal with channel with acid. |
| 82 | Cleaning glazed tiles with acid. |
| 83 | Cleaning and polishing marble or mosaic partition including removing stains. |
| 84 | Rectifying leakage of W.C. by new joints by methor mistry. |
| 85 | Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) |
| 86 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(a) Upto 20 users:-Beyond a lead of 150 metre and outside the Municipal limit |
| 87 | Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at thejunction of floor and wall at 300 mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litreperhole. Theholes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para4.3.1.4 of codeI.S.-6313(Part-III) 1981. |
| 88 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) |
| 89 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats) |
| 90 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor: |
| 91 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 92 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 93 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) on Timber or plaster surface With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)(a) on Timber or plaster surface With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) |
| 94 | b)on steel or other metal surface Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender