Tender For Running And Maintenance Of Lwss Thora Bhaloon & Baral In Tehsil Nurpur District Kangra Himachal Pradesh ( Sub Head:- Sinking Of Percolation Well Below Ground Level From 6.00 To 9.00 Mtr )(Under Pdna)
Tender Value
9.17 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
5 days left
EMD
18356
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Running And Maintenance Of Lwss Thora Bhaloon & Baral In Tehsil Nurpur District Kangra Himachal Pradesh ( Sub Head:- Sinking Of Percolation Well Below Ground Level From 6.00 To 9.00 Mtr )(Under Pdna)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition above ground level up to floor two level including stacking of serviceable material and un-serviceable materials within 20 Metres lead and including cuttings the necessary reinforcement and separating out from RCC work. within all leads and lifts as per direction of Engineer-in-Charge. |
| 2 | Excavation in foundation for digging in all kinds of earth work i.e. spade work, pick work, jumper work, blasting work, hard blasting chiselling and saturated soil including bailing or pumping out water ground level upto the level where well curve is placed including depositing soils in 20 metres radios and filling space out side the well after completion within all leads and lifts as per the direction of Engineer-in -Charge. |
| 3 | Well sinking in gravel in all kinds of soil such as : pick work, jumper work, blasting, chiselling and blasting soft / hard rock where sides in saturated soil, pumping shoring etc. complete in all respect within all leads and lifts as per the direction of Engineer-in -Charge. |
| 4 | From spring level to 6.00 metre to 9.00 metre depth within all leads and lifts as per the direction of Engineer-in -Charge. |
| 5 | Providing and laying cement concrete work 1 : 2 : 4 ( 1 cement : 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 6 | Suspended floors, roofs, landings & shelves, and their support balconies, beams, girders, bressummers, and cantilevers up to floor two level, within all leads and lifts as per the direction of the Engineer-in-Charge |
| 7 | Columns, pillars posts and struts upto floor two level within all leads and lifts as per the direction of Engineer-in-Charge. |
| 8 | Providing form work with steel plates 3.15 milimetre thick welding with angle iron in frame 30x30x5 milimetre, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for in-situ-reinforced concrete and plain concrete work in:- |
| 9 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etc. up to 200 milimetres in thickness within all leads and lifts as per the direction of Engineer -in- Charge. |
| 10 | Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressummers 1.00 metre depth in all heights from floor within all leads and lifts as per the direction of Engineer-in -Charge. |
| 11 | Providing mild steel / tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in- Charge. |
| 12 | Boulder / stone filling under floors/behind retaining walls complete under lean concrete to prevent the entery of surface within all leads and lifts as per the direction of Engineer-in -Charge. |
| 13 | Brick work using common burnt clay building bricks of approved quality in foundation and plinth in cement mortar 1: 4 (1 cement : 4 sand) (1st. class bricks) within all leads and lifts as per the direction of Engineer-in -Charge. |
| 14 | 15mm thick cement plaster in single coat on Fair side of brick / stone masonry for interior plastering up to floor two level including arises, internal rounded angles, chamfers and. or rounded angles not exceeding in girth &finished even and smooth in cement mortar 1:6(1cement: 6sand).within all leads and lifts and as per direction and satisfaction of the Engineer-in-charge. |
| 15 | Steel work welded in built up sections, including cutting, hoisting, fixing in position & applying a priming coat of red paint. In R.S. Joints channels, tees including lowering of well curb in the existing percolation well complete in all respect with in all leads and lifts as per the directions and satisfactions of the Engineer-in-Charge |
| 16 | Manufacturing and fixing of Jali 25X25mm steel mesh complete in all respect as per the direction and satisfaction of Engineer in charge. |
| 17 | Disconnecting and re-fitting of existing Pumping machinery, path, path line, railing etc. complete including cost of cutting, welding etc. with in all leads and lifts as per the directions and satisfactions of the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender