Tender For Construction Of Internal Roads Including Reinforced Cement Concrete Drainage At Rourkela Industrial Estate, Rourkela
Tender Value
56.20 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
7 days left
EMD
56208
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Internal Roads Including Reinforced Cement Concrete Drainage At Rourkela Industrial Estate, Rourkela
BOQ
| Sl. No. | Item Description |
| 1 | ROAD WORK |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. but excluding GST as required for the work complete as per direction of the E-I-C. |
| 3 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction construction & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision). |
| 4 | Excavation for road work in soil with hydraulic excavator of 0.9Cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment locations with all lifts & leads up to 1000mt as per approved Drawing & Technical Specifications and as per Clause- 301 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 5 | Disposal of excess excavated earth by mechanical means of transport within 5.00Km lead including supplying of hire and running charges of vehicles, labour charges, conveyance, T&P and taxes etc. as per the direction of Engineer-in-charge. |
| 6 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300- 2 & Clause 305 of MoSRT&H Specifications for Road and Bridge Works (4th Revision). |
| 7 | Construction of Granular Sub-Base coarse graded grading-VI by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Table 400-1 & 400-2) & in accordance with physical requirement of specification for road and bridge works MORT&H (5th revision) inclusive costs, contingencies, incidentals, involved for finished defect free item of work complete to specification & as directed by the Engineer-in-Charge. |
| 8 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (5th Revision). |
| 9 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per clause 502 of MoSRT&H Specifications for Road & Bridge works (5th Revision). |
| 10 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 503 of MoSRT&H Specifications for Road & Bridge works (5th Revision). |
| 11 | Providing and laying bituminous macadam Gr-II with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H Specifications for Road & Bridge works (5th Revision). |
| 12 | Providing and laying semi dense bituminous concrete Gr-II with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision). |
| 13 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 14 | DRAIN WORK |
| 15 | Earth work in excavation in foundation trenches, column foundation, pit, etc in hard soil within 50m, initial lead and 1.5m, initial lift, including wrought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge. |
| 16 | Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance,royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 17 | Providing and lying Plain Cement Concrete of proportion (1:3:6) using 40 mm black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. |
| 18 | Providing and lying Reinforced Cement Concrete of M-20 grade with 20 mm and down grade black hard granite (Crusherbroken) stone chips including hoisting and laying. |
| 19 | Raft/ Footing |
| 20 | Filling in Foundation and Plinth with excavated materials including watering and ramming as per the direction of Engineer-in-Charge. |
| 21 | Disposal of excess excavated earth by mechanical means of transport within 5.00Km lead including supplying of hire and running charges of vehicles, labour charges, conveyance, T&P and taxes etc. as per the direction of Engineer-in-charge. |
| 22 | Cutting, bending, binding and placing of MS bars in position including cost of uncoated HYSD bars and binding wire etc. complete as per drawing and technical specification. |
| 23 | Rigid and Smooth centering & shuttering for RCC works including false works and dismantling them after casting including cost of materials complete |
| 24 | R.C.C Foundation, Plinth Band and Footing Bases of columns mass concrete pre-cast slabs etc |
| 25 | R.C.C walls and fins including attached pillasters Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender