Tender For Construction Of D Type Quarter Building For Tahasildar Kashipur For The Year 2026-27
Tender Value
50.57 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
10 days left
EMD
50570
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of D Type Quarter Building For Tahasildar Kashipur For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in cutting hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing, levelling and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour, T&P and cess, required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge.Ground Floor |
| 2 | Earth work in excavation of foundation in all kinds of soil including hard moorum, stoney earth mixed with doublers (except sheet rock and boulders requiring blasting) with all leads & lifts including dressing & leveling the bed & depositing the excavated earth at places away from work site with all leads & lifts including Cess and cost of all labour T&P & dewatering if required for the work etc. complete and as per specification and direction of Engineer-In-ChargeGround Floor |
| 3 | Compound wall |
| 4 | CC Road |
| 5 | Supplying and filling in foundation & plinth with sand in 23.5 cm (9\\") thick layers including watering and ramming with cost, conveyance, Royalty, DMF, EMF & Additional Charges of all materials, and labour with T&P required for the work including Cess etc complete. (Measurement will be taken on finished compacted section only) as per direction of Engineer-in-Charge.Ground Floor |
| 6 | Compound wall |
| 7 | CC Road |
| 8 | Providing cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2\\") size clean hard black hand broken granite stone metal of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15cm (6\\") thick to the required level ramming, watering & Curing etc. complete including cost & conveyance of all materials with all Royalty, DMF, EMF & Additional Charges and all labour with T&P required for the work with Cess etc, complete including dewatering if required as per direction of Engineer In Charge. Ground Floor |
| 9 | Compound wall |
| 10 | CC Road |
| 11 | Random rubble hard granite stone masonry in cement mortar (1:6) in foundation and plinth with hard black broken granite stone of approved size and quality and from approved quarry including splays cutting circular moulding and similar such type of work with neCessaryprojections, chamfering and corbelling watering and curing etc, complete including cost and conveyance of all materials with alland Royalty, DMF, EMF & Additional Charges and labour with T&P required for the work with Cess etc, complete as per the direction of Engineer-In-Charge. Ground Floor |
| 12 | Compound wall |
| 13 | Fly Ash brick masonary in Cement Mortar (1:6) using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all Royalty, DMF, EMF & Additional Charges with all T&P & Cess etc, complete in all respect as per the direction of Engineer-in-charge. In SuperstructureGround Floor |
| 14 | In SuperstructureCompound wall |
| 15 | Cement concrete of proportion (1:2:4) using 12mm (1/2\\") size clean crusher broken grantie chips of approved quality from approved quarry including hoisting lowering and levelling in position to required level including frame work where neCessary ramming and levelling cruing dewatering with cost conveyanceand Royalty, DMF, EMF & Additional Charges labour of all materials including hire and running charges of machineries T&P required for the work with Cess etc, complete as per specification and direction of Engineer-in-charge. Ground Floor |
| 16 | Compound wall |
| 17 | CC Road |
| 18 | Providing R.C.C work of M-20 grade with 20mm and down graded clean hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering, laying & compacting concrete, watering and curing for 4 weeks, centering, shuttering & finishing the exposed surface smooth to recieve painting or white or colour wasing providing grooves or beads where neCessary with cost, conveyance, Royalty, DMF, EMF & Additional Charges andof all materials and labour with T&P Cess required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charge for straightening, cutting, bending, binding etc. of the M.S. Rods or Tor steel and binding wire and laying the grills and placing in proper position etc complete and as per specification & direction of Engineer-in-charge Column BaseGround floor |
| 19 | Column BaseCompound wall |
| 20 | Column & BeamsGround floor |
| 21 | Column & BeamsCompound wall |
| 22 | Plinth BeamsGround floor |
| 23 | LintelsGround floor |
| 24 | ChajjaGround floor |
| 25 | Roof SlabGround floor |
| 26 | Precast Slabs / Lofts / ShelvesGround floor |
| 27 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance &of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&Prequired for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge. Ground floor |
| 28 | Compound wall |
| 29 | 20mm (3/4\\") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiseling the same and cleaning surface by wire brushing laid to proper slope finsihed smooth to receive tarfelt tratment watering and curing including cost and conveyance of all materials and labour with T&P and Cessrequired for the work with alland Royalty, DMF, EMF & Additional Charges etc, complete in all respect in all floors as per direction of Engineer-in-charge. Ground floor |
| 30 | 16mm (5/8\\") thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9\\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floor as per direction of Engineer-in-charge. Ground floor |
| 31 | 12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. Ground floor |
| 32 | Compound wall |
| 33 | Colour washing two coats over a coat of white washing with good shell lime and approved colouring materials with cost, conveyance Royalty, DMF, EMF & Additional Charges of all the materials & labour with T&P and Cess required for the work etc complete as per the direction of Engineer-in-Charge. Compound wall |
| 34 | Distempering two coats over a coat of oil bound primer to the wall surface with any approved shadeincluding cost of distemper and primer with cof all materials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. Ground Floor |
| 35 | Finishing wall surface two coats with any approved weather shield cement paint over a coat of oil bound primerto outer wall surface after celaning surface including cost of paint and primer watering curing with cost conveyance andof all materials and labour with T&P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge.Ground Floor |
| 36 | Compound wall |
| 37 | Supplying,fitting & fixing vetrified tile in floors of size 600mm x 600mm of approved make conforming to IS:13755laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved quality including with cost, conveyance,Royalty, DMF, EMF & Additional Charges ,of all materials & labour T&P and Cess required for the work all complete as per direction ofEngineer-In-Charge. (For New Work Only)Ground floor |
| 38 | 2.5 cm (1\\") artificial stone flooring with cement concrete (1:2:4) laid to proper slope using 12mm (1/2\\") size crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying & compacting concrete etc, watering curing cost & conveyance of all materials && Royalty, DMF, EMF & Additional Charges etc. with all labour T&P and Cess required for the work complete including side shuttering in all respects as per the direction of Engineer-in-charge. |
| 39 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality with frame, shutters and all fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.Ground Floor |
| 40 | Providing and fixing ISI marked 35mm thick flush door shutters confirming to IS : 2202 (Part-I) decorative type, core of block board constuction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.Ground Floor |
| 41 | Supplying, fitting, fixing of window (sliding type) made up of aluminium section 9778 as windows frame section no.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement, all fittings including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-chargeGround Floor |
| 42 | Providing, fabricating, transporting and supplying at site of M.S Doors, Windows, Grills and shutters of approved design with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.Ground Floor |
| 43 | Compound wall |
| 44 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.Ground Floor |
| 45 | Compound wall |
| 46 | Painting two coats with any approved paint over a coat of priming to new wood work and iron work including cost of the primer and paints including and papering, polishing the surface in all respect with cost, conveyance andof all materials and labour, Cess with T&P required for the work etc. complete in all respect.Compound wall |
| 47 | EI Work Wiring Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 48 | -do- Group B |
| 49 | -do- Group C |
| 50 | Recessed wiring to Fan Point in... -do- Group B |
| 51 | Recessed wiring to Call Bell Point in... -do- Group B |
| 52 | Recessed wiring to Exhaust Fan Point in Do Group B |
| 53 | Switch BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 54 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 55 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 56 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 57 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 58 | 2 Modular box with base & cover |
| 59 | 4 Modular box with base & cover |
| 60 | 6 Modular box with base & cover |
| 61 | 8 Modular box with base & cover |
| 62 | 12 Modular box with base & cover |
| 63 | Sub-Main2x1.5+1x1.5 (1.8.1) |
| 64 | 2x2.5+1x1.5 (1.8.2) |
| 65 | 2x4+1x1.5 (1.8.3) |
| 66 | 2x6+1x2.5 (1.8.4) |
| 67 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 68 | Circuit Breakers & BDBS/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 69 | S/F of 'C' series DP MCB of 32 amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)Make L&T/Havells/C&S or Equivalent |
| 70 | S/F of MCB 6 way Single door (2.3.1(a) + 2.3.1(b)) |
| 71 | Main switchesS/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 72 | EarthingEarthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 73 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 74 | FittingsProviding & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 75 | S/F of 300mm double ball bearing with metal body Exhaust fan Copper Winding having air delivery >1600 m3/min (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB ) With all acessories and Connection etc as required as per direction of Engineer in Charge ,Replace Warrenty will be two Years . |
| 76 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 77 | S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC) |
| 78 | SITC of 1200mm sweep A.C Ceiling fan (1Star) Copper Winding with Aluminium Blades having air delivery > 225m3/min without fan regulator(Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) including wiring the down rod of Standred length(upto 30cm) with 1.5 mmsq PVC insulated single core multistrand Copper Conducter etc as required as per direction of Engineer in Charge ,Replace Warrenty will be two Years . |
| 79 | Fixing /I.T.C. of stepped type Modular regulator (1.25a) |
| 80 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 81 | S/F of 12w Watt LED Bulb |
| 82 | S/F of 1.5T ,3Star,Inverter model, Split A.C Machine(Make- Hitachi(G318PCCISS)/Blue star(ID318DNUHC)/Carrier(CAI19CL3R35F0)/Daikin/LG/Mitsubishi/O-General) |
| 83 | S/F of 1650-1700VA/24V Invertor machine(Make-Microtek(Super power new 1700)/V-Guard(PRIME 1650)/Luminous(EVO S 1650) and 180Ah tall tubular BatteryMake-Luminous and 16A Delux plug Top with Luminous single Trolley for Inveryor Battery,2nos |
| 84 | S/F of Stabilizer (110-300V) 4KVA with 16A Delux plug Top(Make- V-Guard/Microtek) |
| 85 | Supply and installation of 35 Watt gate light. (Make- Havells) |
| 86 | PH WORk10 user septic tank Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.Initial lift upto 1.5 mtr ,3.04 m x 1.94 m x 1.50 m= |
| 87 | From 1.5 mtr to 3.0 mtr depth,3.04 m x 1.94 m x 0.70 m= |
| 88 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.3.04 m x 1.94 m x 0.15 m= |
| 89 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.04 m x 1.94 m x 0.10 m= |
| 90 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(3.04 m x 1.94 m x 0.10 m=0.589 cum+2.04 m x 0.94 m x 0.038 m = 0.072 Cum) |
| 91 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M(1:4) including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In Foundation and Plinth in C:M (1:4),2 x ( 2.74 + 0.94 ) m x 0.35 m x 1.10 m = 2.833 cum+ 2 x ( 2.50 + 0.94 ) m x 0.23 m x 0.80 m = 1.265 cum |
| 92 | In Foundation and Plinth in C:M (1:6) 1 x 0.40 m x 0.40 m x 0.60 m = 0.096 cum |
| 93 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.12 mm thick C.P in C:M (1:4),2 x ( 2.04 + 0.94 ) m x 1.90 m =11.324sqm + 2.04 x 0.94 m = 1.917sqm+ 4 x 0.40 x 0.60 m = 0.96 sqm |
| 94 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.,2 x ( 2.04 + 0.94 ) m x 1.90 m =11.324sqm +2.04 x 0.94 m =1.917 sqm |
| 95 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2 x ( 2.50 + 1.40 ) m x 0.10 m = 0.78 sqm+2.04 x 0.94 m = 1.917 sqm |
| 96 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 97 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2.50 m x 1.40 m x 0.10 m=0.39 cum |
| 98 | Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 99 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. 1.15 m x 0.45 m |
| 100 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 101 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2 x ( 2.74 + 1.64 ) m x 1.10 m = 9.636 Sqm + 2 x ( 2.50 + 1.40 ) m x 0.80 m = 6.24 Sqm + 2 x ( 2.74 + 1.40 ) m x 0.12 m = 0.993 Sqm |
| 102 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 103 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall |
| 104 | 375mm thick wall |
| 105 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 106 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe |
| 107 | 110mm dia U-PVC S. Trap |
| 108 | 110mm dia U-PVC P. Trap |
| 109 | 110mm U-PVC S/J with Door |
| 110 | 110mm U-PVC door bend |
| 111 | 110mm dia U-PVC Plain bend |
| 112 | 125mm dia CP Grating |
| 113 | 110mm U-PVC Plain Tee |
| 114 | 110mm U-PVC Cowl |
| 115 | 75mm dia U-PVC SWR Pipe |
| 116 | 75mm dia U-PVC Plain Tee |
| 117 | 75mm U-PVC Door Bend |
| 118 | 75mm U-PVC Plain Bend |
| 119 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 120 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
| 121 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90m dia x 2.00m deep soak way pit |
| 122 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with Haunch top |
| 123 | Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C.160 mm dia PVC gallary |
| 124 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. Suprem/Ashirbad20 mm dia C-PVC Pipe( Internal) |
| 125 | 25mm dia C-PVC Pipe (Internal) |
| 126 | Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC.1000 lit sintex tank (G Floor) |
| 127 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.1000 ltr capacity tank G Floor |
| 128 | Factory made FRP/Alluminum door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. . The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C Door -2x ( 2.00 + 2.00 + 0.75 ) =9.50 |
| 129 | Factory made single leaf rigid FRP/Alluminum door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. . A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. Door -2 x 1.95 x 0.72 =2.808 |
| 130 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor2x2.10m x 1.50m= 6.30 sqm1x 3.50m x 0.60m= 2.10 sqm2 x 0.75m x 0.30m= 0.45 sqm(-) 1 x 0.58m x 0.44m= 0.255 sqm |
| 131 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall2 x 6.60m x 2.10m= 27.72 sqm1 x4.0m x 0.90m= 3.60 sqm |
| 132 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580 mm Porcelain Orissa Pan |
| 133 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra) |
| 134 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra) |
| 135 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra ) |
| 136 | Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.Porcelain Pedestal |
| 137 | Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.B.E Mirror |
| 138 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Ambar make . |
| 139 | CP Towel ring heavy Stainless steel with mousoumi make . |
| 140 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 141 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Ambar make) (Shower+Arm) |
| 142 | Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality |
| 143 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra ) |
| 144 | Supplying all materials, labour, T&P and fixing Stainless Steel kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages fixing PVC waste pipe of 32mm nominal diameter including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. stainless steel kitchen sink(600x 400x200mm) |
| 145 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings ( Jaquar) of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia cp bib cock Short body Bib Cock . |
| 146 | 15mm dia cp Long Body Bib Cock |
| 147 | 15mm dia CP Two way bib Cock |
| 148 | 15mm dia CP wall mixture ( 2 in 1) |
| 149 | 15mm dia CP pillar cock |
| 150 | 15mm dia cp concealed stop cock |
| 151 | 15mm dia cp angle stop cock |
| 152 | Health Faucet |
| 153 | 15mm dia CP flange |
| 154 | 15mm dia CP Extension piece |
| 155 | 25mm dia Brass Ball Valve |
| 156 | Sinking of T.W (125mm x 100mm dia)Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell)Drilling of 125mm dia bore :-00 mtr to 30.00 mtr |
| 157 | Drilling of 100mm dia bore :-30.01 mtr to 80.00 mtr |
| 158 | Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. Lowering of 125 mm dia PVC pipes :- 00mtr to 30.00 mtr |
| 159 | Cost of 125 mm dia PVC pipes :- 00mtr to 30.30 mtr |
| 160 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. |
| 161 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 162 | Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
| 163 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 164 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 165 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 166 | Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.32 mm dia HDPE Pipe(Internal Pipe) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender