Tender For Providing And Fixing Of cement concrete Collar, Panel, Junction Box In Place Of Missing/Broken Cover In Ward No. 4, 5 And 6 Under Sub Division No. 2, M.C. Chandigarh.
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
3 days left
EMD
9998
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of cement concrete Collar, Panel, Junction Box In Place Of Missing/Broken Cover In Ward No. 4, 5 And 6 Under Sub Division No. 2, M.C. Chandigarh.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Oct-2026 | Corrigendum | Date | 08-Oct-2026 |
| 2 | 08-Oct-2026 | Corri | Date | 12-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | S/E of CC Collars including following:- a) The box shall be enclosed in a cement collar made from cement concrete 1:2:4 with outside dia 16”. b) The collar shall be embedded in the group upto 6” shall stand 9” above ground shall have housed 12” high SMC Box and 6” top over the box.c) The collar shall be provided with 2 G.I. Pipe of 40mm dia and 45cm long to facilitate entry of cables in the junction box after digg out the cable loops from earth complete in all respects, connections etc.d) The collar shall be plastered properly finished, curing and painted with 2 coats of Apex paint of superior quality.e) Providing and Fixing junction box of size 250x200x100mm inside dimensions of thermosetting sheet moulding compound material of robust construction with double hinge, side clamp locking arrangement. The existing ckt cable loops be made properly connection after digging from the earth and refilling the same position. There should be a terminal Strip (Thimble type) 30 amp, one no. Kitkat, rating suitable for minimum 4x16 sq.mm aluminum cable termination. The sheath of the armoured cable should be properly thimbed with the pole for proper earthing. Curing of CC Collar must be done as per satisfaction of Engineer-in-charge. The junction box should have two numbers PVC Glands with sufficient space for cable entry and loose wires complete in all respect. |
| 2 | Providing and fixing of Junction Box Cover of Fiber Sheet of 10\\"x8\\" suitable size on existing octagonal pole/ Street Light Poles. The fiber cover shall be installed on existing jucntion box with the help of screw. The job includes the cost of all labour charges and other petty material required to complete the job upto entire satisfaction of Engineer-in-Charge. |
| 3 | Dismantling and re-erection of 16/12.5 Mtr high mast with the help of Crane. The work shall be executed as per the entire satisfaction of Engineer in Charge |
| 4 | The stainless steel wire ropes shall be in AISI 316 grade, 7/19 construction with central core in the same material of diameter and the breaking load of rope shall not be less than 2x2350 Kg, giving a factor of safety of over 5 for the system at full load as per the TR7 reffered to in the beginning of this specification. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 5 | Supply & Erection of PVC Insulated (sheathed) Copper Conductor Cable ISI marked size 5 core 2.5 mm2.Supply & Erection of ISI Marked PVC insulated 5 core 2.5mm2 cable of Copper Conductor (Sheathed) make KEI/ Havell's/ Cirtina/ Sunhome/ Lapp/ Polycab in pipe of suitable size excluding cost and erection of pipe/pole etc. (i) Cable size 5 core 2.5 mm2 Copper Conductor 1100 Volts Grade. The work shall be executed to the entire satisfaction of Engineer-in-charge. |
| 6 | Supply and erection of lubrication/greasing/oil in gear box. The work shall be executed as per the entire satisfaction of Engineer in Charge |
| 7 | Whinching of High mast of 16/12.5 mtr.The work shall be executed as per the entire satisfaction of Engineer in Charge |
| 8 | Dismantling of existing damaged/broken old bollard lights/CC Collar, Jallies alongwith junction box, wire and C.C. foundation etc. and other material complete in all respect to the satisfaction of Engg-in-charge. The entire “malba” shall be disposed off and send to C & D plant Industrial Area Phase-I. The work shall be executed as per the entire satisfaction of Engineer in Charge. |
| 9 | Painting of pedestal size 1200x900x350mm with P.O. red paint complete in all respect and bonding to the existing earth etc. and platform of cement concrete 1:2:4 around the pillar box of size 3’x2’x0’-4”. The Cost includes writing MCC and Danger in Bold letters such that it is warning about hazard as threats which are essential to safety for General Public. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 10 | Supply & laying of ISI marked 4 core 16 mm sq PVC Insulated Aluminium armoured cable loose in trench/pipe:-Supply & laying of ISI marked 4 core 16 mm sq PVC Insulated Aluminum conductor armoured cable (PVC Sheathed) of make Sunhome/ Finolex/ Cirtina/ Ecko/ Lapp/ Polycab/ KEI conforming IS:1554 (Pt.1) amended. The cable to be laid in trench/ pipe as per DSR Code 7.5.1/2022 MV CB PIP-25 Part-II (External). The cable should be terminated existing/ new cc collar with proper thimbling. The job included all Connections, Commissioning and testing of phase supply Material Testing report to be submitted and material to be supplied at site after confirmation from Engineer-in-charge. The specification of the cable as below:- i) Conductor – Aluminumii) Core – 4iii) Working Voltage – 1100 Viv) Nominal Cross Section – 16mm2 v) Minimum No. of Wire – 7/6vi) Insulation Thickness – 1.0mm (Nominal)vii) Inner Sheath Minimum Thickness – 0.3mm viii) Outer Sheath Minimum Thickness – 1.40mmix) Nominal size of Armoured Wire/Strip – 4x0.8mmx) Approximate O.D. – 22mmMaximum d.c. Resistance at 20 Deg. C – 1.91 ohm/kmThe work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 11 | Supply & Laying of DWC pipe 51/63mm with hand bockey:- DSR 14.15.1 (75 cm below) Supply and Laying of pipe (OD-63 mm & ID-51 mm nominal) Double Wall Corrugated (DWC) With Hand Bockey High Density Polyethylene pipe ISI marked (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, good weathering resistance, with all accessories like socket, bend, couplers etc. conforming to IS 14930/ IS 16205 complete with fitting and cutting, jointing etc.direct in ground (depth as per the direction of Engineer in charge or upto 75 cm below ground/ road level by digging the ground or cutting the road/ paver blocks upto required level & laying of DWC pipe for laying L.T. upto 1.1 KV grade) cables etc. including excavation and refilling the trench but including sand cushioning and protective covering etc., complete as required and PSEN-50086 (P-I & II) of Make Gemini, Rex, Duraline. The entire satisfaction of Engineer-in-Charge of work. |
| 12 | Supply & Laying of DWC pipe 51/63mm without hand bockey:- DSR 14.16.1 (75 cm below) Supply and Laying of pipe (OD-63 mm & ID-51 mm nominal) Double Wall Corrugated (DWC) Without Hand Bockey High Density Polyethylene pipe ISI marked (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, good weathering resistance, with all accessories like socket, bend, couplers etc. conforming to IS 14930/ IS 16205 complete with fitting and cutting, jointing etc. direct in ground (depth as per the direction of Engineer in charge or upto 75 cm below ground/ road level by digging the ground or cutting the road/ paver blocks upto required level & laying of DWC pipe for laying L.T. upto 1.1 KV grade) cables etc. including excavation and refilling of digging including sand cushioning and protective covering etc., complete as required and PSEN-50086 (P-I & II) of Make Gemini, Rex, Duraline. The entire satisfaction of Engineer-in-Charge of work. |
| 13 | Minor Repair of Cement Bollarrd/CC Collar. Minor Repair of Cement Bollarrd/CC Collar (with Red Paint) with Apex and all the necessary items for repair i.e. sand and cement and curing of CC collar after complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 14 | Repair of pedestal covers of size 1200X900X350 mm and 900X600X350 mm with Hinges, Welding and Labour at site all T&P for door as requried to the best satisfaction of Engineer in charge. |
| 15 | Providing and fixing of pad lock to be fixed in exisiting panel cover. The job also includes the cost of painting of the complete pedestal to the entire satisfaction of Engg. in charge. |
| 16 | Providing and fixing of front doors in place of missing or broken door of existing pedestal of size 1200x900x350 mm (16 SWG Sheet) with hinges, Red Paint 2 coat after Red Oxide Primer, Fabrication, Welding and Labour at site all T&P as requried to the best satisfaction of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 12, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender