Tender For Repair And Maintenance Work Of Rajswan Room Doit Peeplu District Tonk
Tender Value
2.69 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
5380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tonk → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Work Of Rajswan Room Doit Peeplu District Tonk
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 2 | Extra for using Marble printed / Granite shadeor dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles. |
| 3 | Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. |
| 4 | Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. |
| 5 | Providing & Fixing of BEE Star rated copper wounded with class of Insulation 'F', double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in IS 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required. 1200 mm Sweep BEE 2 Star rated (service value >=4.5 to < 5 ) |
| 6 | All in all comprehensive maintenance of various type air conditioners including repair / replacement of compressor, condensing/ cooling coil , refrigerant piping , fan motor , remote , charging of refrigerant whenever required and periodical servicing as per OEM's recommendations and standard terms & conditions of PWD to meet efficient performance of the equipment. 1.5/1.8/2.0 Tr Split type air conditioner with inverter technology/hot&cold technology. |
| 7 | Removing of existing push back chairs by changing necessary 40 density foam in seat and 32 density in back and fabric of cost upto Rs 800/per Rmt. & cover for back and repairing of mechanical system if required complete as per approved of Engineer in charge |
| 8 | Removing of existing visitors chairs by changing necessary 40 density foam in seat and 32 density in back and fabric of cost upto Rs 800/per Rmt. & cover for complete us per approved of Engineer in charge. |
| 9 | Providing & Fixing BWR ISI marked 19 mm board of approved make for making wardrobe/shelves and other furniture with fevicol & nails complete as per approved by engineer in charge |
| 10 | Supply of “ Computer Table” of Modular nature having all thenecessary arrangement for keyboard, CPU, UPS, Printer and wiremanager Table Top : The table top of size 900 x 600mm(WxD)would be made out of post formed on 25 mm thick particle boardwith 0.7mm thick Carvica sheet in half round post formed finish onthe front and rear side, matching color compensating laminatefixed on the bottom side. Other two sides are edge banded and dulysealed with 1.5 mm thick PVC edge banding of matching colorwith high pressure through feed machine. Keyboard Below thetable top the keyboard pull out tray having sliding arrangementfixed on side supporting legs with 450mm G.I. telescopic channel.Keyboard of size 750 x 450 made out of 18 mm thick Particle board laminate with 0.7mm thick laminate sheet having all foursides Flat edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. Side Support :Two supporting side leg of size 600 x750mm(WxH) made out of post formed on 18 mm thick particle board with 0.7mm thick Carvica sheet in half round post formedfinish on two sides and other two sides are edge banded and sealed with 1.5mm thick PVC edge banding of matching color with high pressure through feed machine.Modesty Panel : Made out of 18 mm thick Particle board laminate with 0.7mm thick laminate sheet of size 900 x 750mm(WxH) having all four sides Flat edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. CPU, UPS &Printer Places Table having the provision for CPU of size 300 x 600 x 600mm(WxDxH) below the table top on the right side oftable adjoining to this on left side below the table the provision for UPS of size 450 x 600 x 250mm (WxDxH) and above this theprovision for the Printer and stationary having overall dimension of 450 x 600 x 300mm(WxDxH). All this is made out of 18 mm thick Particle board laminate with 0.7mm thick laminate sheet having all four sides flat edge banded and duly sealed with 1.5 mm thickPVC edge banding of matching color with high pressure through feed machine. All the parts of the table are duly fixed with mini fixdowel system with each other having matching drilled holes to be made on CNC multi hole boring machine for proper matching andalignment of the different part of the table, 4nos. of Self Adjusting level screw of size 45 x 6mm are provide at the bottom of the bothlegs for the proper leveling of the table. |
| 11 | Providing and fixing of false ceiling with grid of M.S.tube sectionof size 19mm X 19mm and with a wall thickness of 1mm+/-0.2mm.The side pipe and the intermediate pipes is fixed to the rooffrom the top with the help of ceiling angles/wire grid shall becovered by the uPVC profile section of size 6mm X 250mm withwall thickness of 0.80mm +/- 0.2mm,with the help of self tappingscrew of 6mm X 13mm, 6mm X 19mm.Necessary cutouts forelectric connections, lighting, air conditioning etc, shall beprovided at required place. The perimeter edge shall be covered byextruded PVC corner beading section of size 9mm X 28mm or25mm X30mm with a wall thickness of 1mm+/-0.2mm fixed byapplying cynoacrylic adhesive complete as per manufacturer’sspecification and direction of Engineer-in-charge |
| 12 | S&F following sizes of ISI marked ( IS:14927 P - II ) uPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners etc. as required. 32 mm x 12 mm |
| 13 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door (Metal / Glazed / Acrylic) Distribution board with Metal end box made out from Galvanized steel / CRCA sheet, powder coated conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, complete with 100 amp. insulated copper bus bar/shorting link , brass neutral link with shrouds, brass earth link , door earthing arrangement, color coded interconnecting wire set of minimum 10.0 sqmm size and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. Metal door (single phase) IK-09 and IP-43 with Metal end box 4 Way |
| 14 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanism , energy limiting of class 3 as per IEC, minimum phase termination capacity of 25 sq.mm., conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating, 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. |
| 15 | Single pole MCB (With B / C curve tripping characteristics) 6 A to 32 A rating |
| 16 | Double pole MCB (With B / C curve tripping characteristics) 50/63 A rating |
| 17 | SITC of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt outputonly at CW (5700K to 6500K) , internal surge protection of 2.5 KV,THD < 15% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) as required. 1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing |
| 18 | Supplying and laying FR PVC insulated & unsheathed flexible copper conductor of following nominal sizes with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. |
| 19 | 2 x 1.5 sq.mm |
| 20 | 2 x 2.5 sq.mm |
| 21 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988) accessories, Aluminum round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch, Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. |
| 22 | Short point (up to 3 mtr.) |
| 23 | Medium point (up to 6 mtr.) |
| 24 | Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make with following details :-Front side finishing with 1mm thick superior quality mica approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavybrass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS HangerRod 20mm dia) complete as per drawing and design approved by Engineer in Charge. |
| 25 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing withpolymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufacturedout of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shallconfoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) |
| 26 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 27 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excluding thecost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix |
| 28 | PVC chair |
| 29 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular /appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs andscrews or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc.Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleatangle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge.(Glazing and paneling to be paid for separately).Anodised aluminum (anodised transparent 81 dyed to requiredshade according to IS : 1868. (Minimum anodic coating of gradeAC 15, Anodizing to be got done from approved Anodizer) |
| 30 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprenegasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With glass panes of 4.0 mm thickness ( weight not less than 10.0kg/sqm) as per IS : 2835. |
| 31 | Add. GST @ 18% on BOQ Amount of Rs. 227601.24 as per FD Order date 23.03.26 and The CE PWD Rajasthan Order No. 21589477 Date 13.04.26 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender