Tender For Construction Of Underground Shelter Shed At Dc Office Complex Samba (Part B)
Tender Value
15.94 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
5 days left
EMD
31880
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Samba → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Underground Shelter Shed At Dc Office Complex Samba (Part B)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed byEngineer-in-Charge.2.7.1 All kinds of soil : |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Excavating, supplying and filling of local earth (including royalty)by mechanicaltransport upto a lead of 5 km also including ramming and watering of the earth inlayers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete |
| 4 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level ::1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate |
| 5 | Reinforced cement concrete work in columns ,attached pillarspillets, shear walls up to floorfive level, excluding the cost of centering, shuttering, finishing andreinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size). |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases up to floor with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size). |
| 7 | centering & Shuttering incl. propping and removal of same in columns, pillars, piers abutments,posts |
| 8 | Foundation and footings bases of columns, |
| 9 | centering & Shuttering incl. propping and removal of same in Suspended floors, roofs, landings, balconies and access |
| 10 | centering & Shuttering incl. propping and removal of same in sides of slabs Above 20 cm wide etc complete |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 13 | Extra for Brick work in superstructure above plinth upto floor v level |
| 14 | CEMENT PLASTER (IN FINE SAND) 12 mm mix 1 : 6 ( 1 cement : 6 Coarse) |
| 15 | 6MM CEMENT PLASTER6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 16 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.1mm Thick |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), including grouting the joints with white cement and matchingSize of Tile 600x600 mm |
| 18 | Providing and laying Ceramic glazed wall tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 19 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade incl primr. Two or more coats on new work |
| 20 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge.With float glass panes of 5.0 mm thickness (weight not lessthan 12.50 kg / sqm |
| 21 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge Powder coated aluminum (minimum thickness of powdercoated 50 microns) for Fixed portion |
| 22 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, 22.1.2 For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 23 | Providing and fixing 12mm thick prelaminated particle board/ACP flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal outer dia pipes. |
| 25 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 26 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 27 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 630x450 mm with single 15 mm C.P. brass pillar tap |
| 28 | Providing and Fixing one Piece white vitreous China Squatting pan with flushing tank complete incl. jet Class A (to be paid as per actual) |
| 29 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats includingS.W. drain pipe 100 mm diameter and 1.20m long complete as perstandard design |
| 30 | Providing and fixing- 110 mm PVC pipes |
| 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe - 32 mm dia |
| 32 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade |
| 33 | Providing and fixing PTMT grating of approved quality and colour. Circular type - 100 mm nominal dia. |
| 34 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length. |
| 35 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group A)( Includiung Sockets ,Main Box , Invertor wiring And supply lane) |
| 36 | Providing and fixing led light bulb/ Cconceld of 9 watt complete job |
| 37 | Providing and fixing Heavy Duty Fan 1200mm Sweep ISI mark of approved brand as per direction of engineer incharge |
| 38 | carriage of materials sand aggregates at avg distance of 10 kms by mt |
| 39 | carriage of material bricks for lead of 10 km |
| 40 | Add Cost Of CIB Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender