Tender For Road Safety Work At Anauni Turn On Budhanpur Didarganj Mehnajpur Audihar Road
Tender Value
20.40 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
0 days left
EMD
2.04 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghazipur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work At Anauni Turn On Budhanpur Didarganj Mehnajpur Audihar Road
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. without lead. |
| 2 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 3 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 4 | Providing and applying primer coat with bitumen slow setting emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. |
| 5 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 6 | Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.20 kg. Per sqm on the prepared the bituminious / granular surface cleaned with mechanical broom. |
| 7 | Bituminous Concrete-Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average out of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent or mix and mier uransporing the not mis to work site laying with a hydrostatic paver finisher with sensor contorl to the required grade, level and alignment rolling with smooth wheeled vibratory and tandem rollers to achive the desired comkpaction as per MORTH specifiaction clause No.509 complete in all lrespects |
| 8 | P/L hot applied thermoplastic compund 2.5 mm thick including reflectionsing glass beads @ 250 gms per sqm area thickness of 2.5 mm is exculusive of suraface applied gllass beads as per IRC:35 the finished surface to be level uniform and free from |
| 9 | P/L hot applied thermoplastic compund 5.0 mm thick including reflectionsing glass beads @ 500 gms per sqm area thickness of 5.0 mm is exculusive of suraface applied gllass beads as per IRC:35 the finished surface to be level uniform and free from |
| 10 | Direction of Place identification sign with size more than 0.9 sqm size board providing & irecting direction & place identification reflectorised sign as per IRC 67 made of high intensity grade sheeting vide clause 801.3 fixed over alluminium sheeting 2 mmthick area exceeding 0.90 Sqm supported on a mils steel angle iron post 75 mm x 75mm x 6mm 2 no. Firmly fixed to the ground by means of property designed foundation with M 15 grade cement concreate 45 cm x 60cm, below ground level as per approved drawing with 7 years warranty . Rate include desing fabrication supply transportation and errection of the sign board and slso inclusive of all taxes royallty etc. All T&P Machine material and labour required for proper comletion of work. Note. The composite warranty jointly singed by original manufacturer & authorise converter of at least 7 years shall be furnised on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. Si no new item 3(i) ch, 27.1/C all cess labour cess levy toll free contractor profit but excluding GST. |
| 11 | STOP SIGNS Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. |
| 12 | SPEED LIMIT Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. |
| 13 | PLACE IDENTIFICATION SIGN BOARD Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. |
| 14 | T-BOARD Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. |
| 15 | T-BOARD Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. |
| 16 | TRAFFIC SIGNS- HAZARD MARKER Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium soling. 1.5 mm thick supported on a mild steel angle iorn post 75 mm x75 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. |
| 17 | TRAFFIC SIGNS- DOUBLE CHEVRON Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium soling. 1.5 mm thick supported on a mild steel angle iorn post 75 mm x75 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. |
| 18 | Supply of Laying of pavement marker ( cat eye) of 3 m or avery Dennission company at S.V name of poly carbonate with electrically welded promate retroreflective lenson both side for maximum retro relective in wet and dry condition with 3 m bitumin adhesive B.T.69 |
| 19 | Providing and erecting \\"W\\" metal beam crash barrier (A-Type) comprising of 3mm thick corrgugated sheet metal beam rail 70cm above road/ground level, fixing on ISMC series channel vertical post 1.50×75×5mm spaced 2mtr. centre to centre 1.8m high 1.1m below ground/road level all steel parts and fitments to be galvanized by hot deep process all fittings to confirm to IS:1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150×75×5mm, 330m long complete as per clause 810 and also including fixing in cement concrete 1:2:4 (1 cement, 2 core sand and 20mm nominal size grit) including of all materials labour T/P etc. RCC foundation of size 0.35×0.35cm & 1100 deep and also including all taxes and excluding cartage at site as per direction engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender