Educational and Research Institute Boards / Undertakings / PSU Closing in 20 days TDR #57741470

Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Operation And Preventive Maintenance Of Sub Station Equipment For Two Year With Arc Rate For Spare Parts; Ht Panel; Annual Maintenance Contract (Amc); Daily Monthly Quaterly Annually; Y

Issued by Boards / Undertakings / PSU · Ahmedabad, Gujarat
Tender Value
84.50 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
20 days left
EMD
2.53 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Available
Quantity
1

Project Description

Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Operation And Preventive Maintenance Of Sub Station Equipment For Two Year With Arc Rate For Spare Parts; Ht Panel; Annual Maintenance Contract (Amc); Daily Monthly Quaterly Annually; Yes - Providing And Erecting Required Size Hot Deep Galvanised Iron Strip For Earthing Of H.T. , Ocb/ Acb/ Transformer Lt Panel Board, Motors Etc. Using Proper Cl . , Providing And Erecting Required Size Copper Strip For Earthing Of H.T. Ocb / Acb/ Transformer, Lt Panel Board, Motors Etc. Using Copper Cl . , Providing And Erecting Annealed Bare Copper Wire 8 To 16 Swg. , Providing And Erecting Hot Deep Galvanised Iron Strip Wire 8 To 16 Swg. , Supplying & Erecting In Earthpit Of Minimum Bore Dia. 225Mm Size Approved Make Safe Earthing Electrode Consisting Pipe-In-Pipe Technology As Per Is 3043-1987 Made Of Corrosion Free Hot Dipped G.I.Pipes Having Outer Pipe Dia Of 80 Mm Having 80-200 Micron Galvanising, Inner Pipe Dia Of 40 Mm Having 200-250 Micron Galvanising, Connection Terminal Dia Of 14 Mm With Constant Ohmic Value Surrounded By Highly Conductive Compound With High Charge Dissipation Suitable For Following Type Of Applications With Chamber And Heavy Duty Cover (A)(Approved Make Oem Has To Submit Test Certificate Including Value Of Earth Resistance Of Installation Duly St Ed And Signed By Agency And Officer Incharge Has To Ensure The Value Of Earthing Resistane Mentioned In Test Certificate) & Having Back Filling Compound Of (B) Inner Chemical (Ccm Compound)- Resistivity:- 0.2 Ohm / Meter Testing As Per Iec 62561-2017, Voltage Drop:- < 1 Volt At No Load & Dry Form, Sulphar Content:- <2%(C) Back Fill Compound :- Earthing Compound Should Be Capable To Retain Moisture For Long Time Necessary Test Report Must Be Submitted By Agency. , [A] For Electrical Installation Up To 440 Vlength Of Pipe - 1 Mtrback Filling Compound - 1 Nos. Of Bag Of 15 Kgs. , [B] For Electrical Installation Up To 11 Kv Located In Other Than Normal Soil I.E. Soft Rock, Marshy Soil Etc. -Length Of Pipe : 2 Mtr -Back Filling Compound :1 No. Bag Of 25 Kg. , [C] For Electrical Installation Covering Transformer Neutrals, Lightning Arrester Earthing, A.C.Plant & Sensitive Computer System(Like Automation, Scada)I.E. Independent Earthing Located In Other Than Normal Soil I.E. Soft Rock, Marshy Soil Etc..-Length Of Pipe : 3 Mtrs. -Back Filling Compound :2 Nos Bags Of 25 Kg. , Sitc Of 14.2 Mm Dia 3 Mtr Long Earth Electrode Of High Tensile Steel Electrode With 250 Micron Copper Bonding & 1 Bag Of Carbon Fill Based Environment Friendly Backfill Tested As Per Iec 62561-7 In Nabl Accredited Laboratory And Suitable Stainless Steel Double Sided Cl . Eco Friendly Rust Proof Heavy Duty Weather Proof Polyethylene Earth Pit Chamber With Following Dimensions :254 Mm Dia (Top), 330 Mm Dia (Bottom) & 260 Mm (Height). , Supplying & Erecting Funnel Type Earthing Having Earth Plate Of Following Size Burred In Specifically Prepared Earth Pit 3 Mtr. Below Ground With 40 Kg. Charcoal And Salt With Alternate Layers Of Charcoal & Salt, 20Mm.Dia. G.I. Pipe With Funnel With A Wire Mesh For Watering & Bricks Masonry Block, C.I. Cover Complete As Per Para 7.3 Of Is 3043 With Necessary Length Of Double Galvanised Iron / Copper Earth Wire No 6 Swg Bolted With Lug To The Plate And Covered In 12 Mm Dia. G.I. Pipe 2.5 Mtr Long Complete Connected To The Nearest Switch Gear With End Socket As Per Direction & Duly Tested By Earth Tester Confirming To Is (As Per Drawing) With Following Specification , Providing And Erecting Isi Marked 3Core 240 Sq.Mm Xlpe Insulated 11 Kv Armoured Cable Aluminium Conductor Is-7098 To Be Laid On Wall With Cl S Or In Provided Cable Trench / Pipe Approved Manner As Directed. , Providing And Erecting Cable End Termination Kit, Heat Shrinkable Push On Type Densons/ Raychem/ Elastimold Make Suitable For 11 Kv Xlpe Cable 3Core 240 Sq.Mm , (A) Outdoor Type , (B) Indoor Type , Supplying And Erecting High Tension Cable End Box Outdoor Type Suitable. For 11 Kv 240Sq.Mm 3Core H.T. Cable Complete With Gland Bushing And Jointing Material. , Providing And Fixing Printed Instruction Chart Both In English And Gujarati And Duly Framed With Front Glasses, For Treatment Of Person Suffering From Electric Shock With Minimum 50 Diagonally Size. , Providing And Fixing Printed Instruction Chart Both In English And Gujarati And Duly Framed With Front Glasses, For Treatment Of Person Suffering From Electric Shock With Minimum 50 Diagonally Size. , Providing Pair Of Rubber Hand Gloves Suitable For Working On 11 Kv/22 Kv Supply. , Supplying Rubber Matting Of Following Thickness As Per Is:15652/Iec 61111 , (B)4Mm , (C)12Mm , Supplying & Fixing Steel Chequered Plate Having 10 Mm Thickness,With Handle Duly Painted With Two Coats Of Black Japan Colour. (Average Wt 84.6 Kg / Sq.Mtr) , Supplying & Fixing Steel Chequered Plate Having 12 Mm Thickness, Duly Painted With Two Coats Of Black Japan Colour. (Average Wt 200.3 Kg / Sq.Mtr) , Supplying Stand First Aid Box With Antiseptic Cream, Medicine For Use On Wounds Due Burn, Crepe Bandage, Gauge Bandage, Medicated Ready To Use Bandage (Band-Aid) Adhesive Tape For Medicinal User, Scissors, Anti-Septic Solution (Savlon Or Similar) Etc. (All Above Contents Shall Be Of Standard Makes) , Supplying & Erecting D.C.P. Type Fire Extinguisher For Following Capacity Cartridge Type With Gun Metal Cap 150 Gram Co2 Gas Cartridge, Powder And Brackets Confirming To Is 2171 1985 And Complete Erected With Necessary Cl S Made From 50 X 6 Mm M S Flat With Nuts And Bolts Grouted In Wall Complete. , [A] For 5 Kg Capacity , [B] For 10 Kg Capacity , Supplying & Erecting Carbon Dioxide (Co2) Fire Extinguisher User Of Following Capacity With Necessary Cl S Made From 50 X 6 Mm M.S. Flat With Nut & Bolts Grouted In Wall Complete. , [A] For 4.5 Kg Capacity , [B] For 5.5 / 6.5 Kg Capacity , Supplying Fire Bucket Round Bottom Of 9 Litres Capacity Made Out Of 24 Gauge G.I. Sheet With Extra Handle At Bottom Duly Painted White Inside And Red Out Side With Fire Mark, Filled With Dry-Sand And Kept On Existing Stand Provided Or Hung On Wall Hook. , Supplying And Erecting Floor Mounting Stand For Keeping Four Nos. Of Fire Buckets Comprising 1500 Mm In Length, 900 Mm Height Frame Made Out Of 30Mm X30 Mm X 4 Mm Angle Iron With Cross Supports For Legs, Welded With 4 Hooks And Duly Painted With One Coat Of Red Lead And Two Coats Of Approved Enamelled Silver Paint. , Wall Hook 22 To 25 Cms. Projection For Keeping Fire Buckets Made Out Of 15 Mm Dia. M.S Rod Grouted In Wall To A Depth Of Minimum 15 Cms. , Providing And Erecting Metallic Vitrified Danger Notice Board For Medium Voltage Installation To Be Erected As Per Is. , Providing And Erecting Metallic Vitrified Danger Notice Board For High Voltage Installation To Be Erected As Per Is. , Providing & Erecting Medium/Low Voltage Danger Notice Board Sticker Of Standard Size , Providing & Erecting High Voltage Danger Notice Board Sticker Of Standard Size , Supply & Erecting Of Ur 12 Kv, Ir 400A, Isc25ka, Up12kv 50Hz , Supply & Erecting Of 3 C/O + 1 Earth Foult Relay , Supply & Erecting Of 86 High Speed Master Trip Relay 110-125V , Supply & Erecting Of Buach Trip Relay-110-125V , Supply & Erecting Of Wti Trip Relay-110-125V , Supply & Erecting Of Oti Trip Relay-110-125V , Supply & Erecting Of M2-8 Pogrammable Annunciator V2.0 , Supply & Erecting Of Multifunction Meter , Supply & Erecting Of Digital Ammeter , Supply & Erecting Of Digital Voltmeter , Supply & Erecting Of Tnc Switch , Supply & Erecting Of Tch Push Button With L (White) , Supply & Erecting Of Local Remote 2Pole 2Way , Supply & Erecting Of Led Type Indicating L (Red) , Supply & Erecting Of Led Type Indicating L (Yellow) , Supply & Erecting Of Led Type Indicating L (Blue) , Supply & Erecting Of On Led Type Indicating L (Red) , Supply & Erecting Ofoff Led Type Indicating L (Green) , Supply & Erecting Of Trip Led Type Indicating L (Amber) , Supply & Erecting Of Spring Charge Led Type L (Blue) , Supply & Erecting Of Vcb Test Led Type L (White) , Supply & Erecting Of Vcb Service Led Type L (Yellow) , Supply & Erecting Of Close Push Button With Elements(Black) , Supply & Erecting Of Electronic Hooter , Supply & Erecting Of Dc Power Pack(230Vac I/P, 110Vdc O/P) , Supply & Erecting Of 16A Dp 10Ka Mcb With C Curve , Supply & Erecting Of 10A Dp 10Ka Mcb With C Curve , Supply & Erecting Of 6A Dp 10Ka Mcb With C Curve , Supply & Erecting Of 3C/O Relay With Base 110Vdc , Supply & Erecting Of Terminal Type Neutral Link , Supply & Erecting Of Bridge Rectifire , Supply & Erecting Of Heater On/Off Switch , Supply & Erecting Of 5/15A Socket With Switch , Earthing System For Ht 11Kv Charcol , Earthing System For Ht 11Kv Charcol With Upto 3 Mtr Depth , Earthing System For Lt 440 V Chemical Upto 2 Mtr Depth , Earthing System For Lt 440 V Charcol Upto 2 Mtr Depth , One-Time Job For Updating All Preventive Maintenance Of Existing Transformers At C Us 1 (2 Nos.) , Electrical Noc – Clearing All Charges And Exemption Of Legal Fees

BOQ

Sl. No. Item TitleItem Description
1Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.
2Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.
3Providing and erecting Annealed bare Copper wire 8 to 16 SWG.Providing and erecting Annealed bare Copper wire 8 to 16 SWG.
4Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.
5Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency.Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency.
6[A] For electrical installation up to 440 VLength of Pipe - 1 MtrBack filling compound - 1 Nos. of Bag of 15 Kgs.[A] For electrical installation up to 440 VLength of Pipe - 1 MtrBack filling compound - 1 Nos. of Bag of 15 Kgs.
7[B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe : 2 mtr -Back filling Compound :1 no. Bag of 25 Kg.[B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe : 2 mtr -Back filling Compound :1 no. Bag of 25 Kg.
8[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..-Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..-Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.
9SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).
10Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following specificationSupplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following specification
11Providing and erecting ISI Marked 3core 240 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor IS-7098 to be laid on wall with clamps or in provided cable trench / pipe approved manner as directed.Providing and erecting ISI Marked 3core 240 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor IS-7098 to be laid on wall with clamps or in provided cable trench / pipe approved manner as directed.
12Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 240 Sq.mmProviding and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 240 Sq.mm
13(A) Outdoor type(A) Outdoor type
14(B) Indoor type(B) Indoor type
15Supplying and erecting high tension cable end box outdoor type suitable. for 11 KV 240Sq.mm 3core H.T. cable complete with gland bushing and jointing material.Supplying and erecting high tension cable end box outdoor type suitable. for 11 KV 240Sq.mm 3core H.T. cable complete with gland bushing and jointing material.
16Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock with minimum 50\\" diagonally size.Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock with minimum 50\\" diagonally size.
17Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock with minimum 50\\" diagonally size.Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock with minimum 50\\" diagonally size.
18Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.
19Supplying rubber matting of following thickness as per IS:15652/IEC 61111Supplying rubber matting of following thickness as per IS:15652/IEC 61111
20(b)4mm(b)4mm
21(c)12mm(c)12mm
22Supplying & fixing Steel Chequered Plate having 10 mm thickness,with handle duly painted with two coats of black Japan colour. (Average Wt 84.6 kg / Sq.Mtr)Supplying & fixing Steel Chequered Plate having 10 mm thickness,with handle duly painted with two coats of black Japan colour. (Average Wt 84.6 kg / Sq.Mtr)
23Supplying & fixing Steel Chequered Plate having 12 mm thickness, duly painted with two coats of black Japan colour. (Average Wt 200.3 kg / Sq.Mtr)Supplying & fixing Steel Chequered Plate having 12 mm thickness, duly painted with two coats of black Japan colour. (Average Wt 200.3 kg / Sq.Mtr)
24Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)
25Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall complete.Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall complete.
26[A] For 5 Kg Capacity[A] For 5 Kg Capacity
27[B] For 10 KG Capacity[B] For 10 KG Capacity
28Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete.Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete.
29[A] For 4.5 Kg Capacity[A] For 4.5 Kg Capacity
30[B] For 5.5 / 6.5 KG Capacity[B] For 5.5 / 6.5 KG Capacity
31Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook.Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook.
32Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint.Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint.
33Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a depth of minimum 15 cms.Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a depth of minimum 15 cms.
34Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.
35Providing and erecting metallic vitrified danger notice board for HIGH VOLTAGE installation to be erected as per IS.Providing and erecting metallic vitrified danger notice board for HIGH VOLTAGE installation to be erected as per IS.
36Providing & erecting Medium/LOW Voltage Danger Notice Board sticker of standard sizeProviding & erecting Medium/LOW Voltage Danger Notice Board sticker of standard size
37Providing & erecting High Voltage Danger Notice Board sticker of standard sizeProviding & erecting High Voltage Danger Notice Board sticker of standard size
38SUPPLY & ERECTING OF UR 12 KV, IR 400A, ISC25KA, UP12KV 50HZSUPPLY & ERECTING OF UR 12 KV, IR 400A, ISC25KA, UP12KV 50HZ
39SUPPLY & ERECTING OF 3 C/O + 1 EARTH FOULT RELAYSUPPLY & ERECTING OF 3 C/O + 1 EARTH FOULT RELAY
40SUPPLY & ERECTING OF 86 HIGH SPEED MASTER TRIP RELAY 110-125VSUPPLY & ERECTING OF 86 HIGH SPEED MASTER TRIP RELAY 110-125V
41SUPPLY & ERECTING OF BUACH TRIP RELAY-110-125VSUPPLY & ERECTING OF BUACH TRIP RELAY-110-125V
42SUPPLY & ERECTING OF WTI TRIP RELAY-110-125VSUPPLY & ERECTING OF WTI TRIP RELAY-110-125V
43SUPPLY & ERECTING OF OTI TRIP RELAY-110-125VSUPPLY & ERECTING OF OTI TRIP RELAY-110-125V
44SUPPLY & ERECTING OF M2-8 POGRAMMABLE ANNUNCIATOR V2.0SUPPLY & ERECTING OF M2-8 POGRAMMABLE ANNUNCIATOR V2.0
45SUPPLY & ERECTING OF MULTIFUNCTION METERSUPPLY & ERECTING OF MULTIFUNCTION METER
46SUPPLY & ERECTING OF DIGITAL AMMETERSUPPLY & ERECTING OF DIGITAL AMMETER
47SUPPLY & ERECTING OF DIGITAL VOLTMETERSUPPLY & ERECTING OF DIGITAL VOLTMETER
48SUPPLY & ERECTING OF TNC SWITCHSUPPLY & ERECTING OF TNC SWITCH
49SUPPLY & ERECTING OF TCH PUSH BUTTON WITH LAMP (WHITE)SUPPLY & ERECTING OF TCH PUSH BUTTON WITH LAMP (WHITE)
50SUPPLY & ERECTING OF LOCAL REMOTE 2POLE 2WAYSUPPLY & ERECTING OF LOCAL REMOTE 2POLE 2WAY
51SUPPLY & ERECTING OF LED Type Indicating lamp (Red)SUPPLY & ERECTING OF LED Type Indicating lamp (Red)
52SUPPLY & ERECTING OF LED Type Indicating lamp (YELLOW)SUPPLY & ERECTING OF LED Type Indicating lamp (YELLOW)
53SUPPLY & ERECTING OF LED Type Indicating lamp (BLUE)SUPPLY & ERECTING OF LED Type Indicating lamp (BLUE)
54SUPPLY & ERECTING OF ON LED Type Indicating lamp (RED)SUPPLY & ERECTING OF ON LED Type Indicating lamp (RED)
55SUPPLY & ERECTING OFOFF LED Type Indicating lamp (GREEN)SUPPLY & ERECTING OFOFF LED Type Indicating lamp (GREEN)
56SUPPLY & ERECTING OF TRIP LED Type Indicating lamp (AMBER)SUPPLY & ERECTING OF TRIP LED Type Indicating lamp (AMBER)
57SUPPLY & ERECTING OF SPRING CHARGE LED TYPE LAMP (BLUE)SUPPLY & ERECTING OF SPRING CHARGE LED TYPE LAMP (BLUE)
58SUPPLY & ERECTING OF VCB TEST LED TYPE LAMP (WHITE)SUPPLY & ERECTING OF VCB TEST LED TYPE LAMP (WHITE)
59SUPPLY & ERECTING OF VCB SERVICE LED TYPE LAMP (YELLOW)SUPPLY & ERECTING OF VCB SERVICE LED TYPE LAMP (YELLOW)
60SUPPLY & ERECTING OF CLOSE PUSH BUTTON WITH ELEMENTS(BLACK)SUPPLY & ERECTING OF CLOSE PUSH BUTTON WITH ELEMENTS(BLACK)
61SUPPLY & ERECTING OF ELECTRONIC HOOTERSUPPLY & ERECTING OF ELECTRONIC HOOTER
62SUPPLY & ERECTING OF DC POWER PACK(230VAC I/P, 110VDC O/P)SUPPLY & ERECTING OF DC POWER PACK(230VAC I/P, 110VDC O/P)
63SUPPLY & ERECTING OF 16A DP 10KA MCB WITH C CURVESUPPLY & ERECTING OF 16A DP 10KA MCB WITH C CURVE
64SUPPLY & ERECTING OF 10A DP 10KA MCB WITH C CURVESUPPLY & ERECTING OF 10A DP 10KA MCB WITH C CURVE
65SUPPLY & ERECTING OF 6A DP 10KA MCB WITH C CURVESUPPLY & ERECTING OF 6A DP 10KA MCB WITH C CURVE
66SUPPLY & ERECTING OF 3C/O RELAY WITH BASE 110VDCSUPPLY & ERECTING OF 3C/O RELAY WITH BASE 110VDC
67SUPPLY & ERECTING OF TERMINAL TYPE NEUTRAL LINKSUPPLY & ERECTING OF TERMINAL TYPE NEUTRAL LINK
68SUPPLY & ERECTING OF BRIDGE RECTIFIRESUPPLY & ERECTING OF BRIDGE RECTIFIRE
69SUPPLY & ERECTING OF HEATER ON/OFF SWITCHSUPPLY & ERECTING OF HEATER ON/OFF SWITCH
70SUPPLY & ERECTING OF 5/15A SOCKET WITH SWITCHSUPPLY & ERECTING OF 5/15A SOCKET WITH SWITCH
71EARTHING SYSTEM FOR HT 11KV CHARCOLEARTHING SYSTEM FOR HT 11KV CHARCOL
72EARTHING SYSTEM FOR HT 11KV CHARCOL WITH UPTO 3 MTR DEPTHEARTHING SYSTEM FOR HT 11KV CHARCOL WITH UPTO 3 MTR DEPTH
73EARTHING SYSTEM FOR LT 440 V CHEMICAL UPTO 2 MTR DEPTHEARTHING SYSTEM FOR LT 440 V CHEMICAL UPTO 2 MTR DEPTH
74EARTHING SYSTEM FOR LT 440 V CHARCOL UPTO 2 MTR DEPTHEARTHING SYSTEM FOR LT 440 V CHARCOL UPTO 2 MTR DEPTH
75ONE-TIME JOB FOR UPDATING ALL PREVENTIVE MAINTENANCE OF EXISTING TRANSFORMERS AT CAMPUS 1 (2 NOS.)ONE-TIME JOB FOR UPDATING ALL PREVENTIVE MAINTENANCE OF EXISTING TRANSFORMERS AT CAMPUS 1 (2 NOS.)
76ELECTRICAL NOC – CLEARING ALL CHARGES AND EXEMPTION OF LEGAL FEESELECTRICAL NOC – CLEARING ALL CHARGES AND EXEMPTION OF LEGAL FEES

AI Tender Summary

OUR REF NO 57741470
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 84.50 Lakhs
LAST DATE 19-10-2026
Authority
Authority Name Institute Of Kidney Diseases And Research Centre
Work Description Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Operation And Preventive Maintenance Of Sub Station Equipment For Two Year With Arc Rate For Spare Parts; Ht Panel; Annual Maintenance Contract (Amc); Daily Monthly Quaterly Annually; Yes - Providing And Erecting Required Size Hot Deep Galvanised Iron Strip For Earthing Of H.T. , Ocb/ Acb/ Transformer Lt Panel Board, Motors Etc. Using Proper Cl . , Providing And Erecting Required Size Copper Strip For Earthing Of H.T. Ocb / Acb/ Transformer, Lt Panel Board, Motors Etc. Using Copper Cl . , Providing And Erecting Annealed Bare Copper Wire 8 To 16 Swg. , Providing And Erecting Hot Deep Galvanised Iron Strip Wire 8 To 16 Swg. , Supplying & Erecting In Earthpit Of Minimum Bore Dia. 225Mm Size Approved Make Safe Earthing Electrode Consisting Pipe-In-Pipe Technology As Per Is 3043-1987 Made Of Corrosion Free Hot Dipped G.I.Pipes Having Outer Pipe Dia Of 80 Mm Having 80-200 Micron Galvanising, Inner Pipe Dia Of 40 Mm Having 200-250 Micron Galvanising, Connection Terminal Dia Of 14 Mm With Constant Ohmic Value Surrounded By Highly Conductive Compound With High Charge Dissipation Suitable For Following Type Of Applications With Chamber And Heavy Duty Cover (A)(Approved Make Oem Has To Submit Test Certificate Including Value Of Earth Resistance Of Installation Duly St Ed And Signed By Agency And Officer Incharge Has To Ensure The Value Of Earthing Resistane Mentioned In Test Certificate) & Having Back Filling Compound Of (B) Inner Chemical (Ccm Compound)- Resistivity:- 0.2 Ohm / Meter Testing As Per Iec 62561-2017, Voltage Drop:- < 1 Volt At No Load & Dry Form, Sulphar Content:- <2%(C) Back Fill Compound :- Earthing Compound Should Be Capable To Retain Moisture For Long Time Necessary Test Report Must Be Submitted By Agency. , [A] For Electrical Installation Up To 440 Vlength Of Pipe - 1 Mtrback Filling Compound - 1 Nos. Of Bag Of 15 Kgs. , [B] For Electrical Installation Up To 11 Kv Located In Other Than Normal Soil I.E. Soft Rock, Marshy Soil Etc. -Length Of Pipe : 2 Mtr -Back Filling Compound :1 No. Bag Of 25 Kg. , [C] For Electrical Installation Covering Transformer Neutrals, Lightning Arrester Earthing, A.C.Plant & Sensitive Computer System(Like Automation, Scada)I.E. Independent Earthing Located In Other Than Normal Soil I.E. Soft Rock, Marshy Soil Etc..-Length Of Pipe : 3 Mtrs. -Back Filling Compound :2 Nos Bags Of 25 Kg. , Sitc Of 14.2 Mm Dia 3 Mtr Long Earth Electrode Of High Tensile Steel Electrode With 250 Micron Copper Bonding & 1 Bag Of Carbon Fill Based Environment Friendly Backfill Tested As Per Iec 62561-7 In Nabl Accredited Laboratory And Suitable Stainless Steel Double Sided Cl . Eco Friendly Rust Proof Heavy Duty Weather Proof Polyethylene Earth Pit Chamber With Following Dimensions :254 Mm Dia (Top), 330 Mm Dia (Bottom) & 260 Mm (Height). , Supplying & Erecting Funnel Type Earthing Having Earth Plate Of Following Size Burred In Specifically Prepared Earth Pit 3 Mtr. Below Ground With 40 Kg. Charcoal And Salt With Alternate Layers Of Charcoal & Salt, 20Mm.Dia. G.I. Pipe With Funnel With A Wire Mesh For Watering & Bricks Masonry Block, C.I. Cover Complete As Per Para 7.3 Of Is 3043 With Necessary Length Of Double Galvanised Iron / Copper Earth Wire No 6 Swg Bolted With Lug To The Plate And Covered In 12 Mm Dia. G.I. Pipe 2.5 Mtr Long Complete Connected To The Nearest Switch Gear With End Socket As Per Direction & Duly Tested By Earth Tester Confirming To Is (As Per Drawing) With Following Specification , Providing And Erecting Isi Marked 3Core 240 Sq.Mm Xlpe Insulated 11 Kv Armoured Cable Aluminium Conductor Is-7098 To Be Laid On Wall With Cl S Or In Provided Cable Trench / Pipe Approved Manner As Directed. , Providing And Erecting Cable End Termination Kit, Heat Shrinkable Push On Type Densons/ Raychem/ Elastimold Make Suitable For 11 Kv Xlpe Cable 3Core 240 Sq.Mm , (A) Outdoor Type , (B) Indoor Type , Supplying And Erecting High Tension Cable End Box Outdoor Type Suitable. For 11 Kv 240Sq.Mm 3Core H.T. Cable Complete With Gland Bushing And Jointing Material. , Providing And Fixing Printed Instruction Chart Both In English And Gujarati And Duly Framed With Front Glasses, For Treatment Of Person Suffering From Electric Shock With Minimum 50 Diagonally Size. , Providing And Fixing Printed Instruction Chart Both In English And Gujarati And Duly Framed With Front Glasses, For Treatment Of Person Suffering From Electric Shock With Minimum 50 Diagonally Size. , Providing Pair Of Rubber Hand Gloves Suitable For Working On 11 Kv/22 Kv Supply. , Supplying Rubber Matting Of Following Thickness As Per Is:15652/Iec 61111 , (B)4Mm , (C)12Mm , Supplying & Fixing Steel Chequered Plate Having 10 Mm Thickness,With Handle Duly Painted With Two Coats Of Black Japan Colour. (Average Wt 84.6 Kg / Sq.Mtr) , Supplying & Fixing Steel Chequered Plate Having 12 Mm Thickness, Duly Painted With Two Coats Of Black Japan Colour. (Average Wt 200.3 Kg / Sq.Mtr) , Supplying Stand First Aid Box With Antiseptic Cream, Medicine For Use On Wounds Due Burn, Crepe Bandage, Gauge Bandage, Medicated Ready To Use Bandage (Band-Aid) Adhesive Tape For Medicinal User, Scissors, Anti-Septic Solution (Savlon Or Similar) Etc. (All Above Contents Shall Be Of Standard Makes) , Supplying & Erecting D.C.P. Type Fire Extinguisher For Following Capacity Cartridge Type With Gun Metal Cap 150 Gram Co2 Gas Cartridge, Powder And Brackets Confirming To Is 2171 1985 And Complete Erected With Necessary Cl S Made From 50 X 6 Mm M S Flat With Nuts And Bolts Grouted In Wall Complete. , [A] For 5 Kg Capacity , [B] For 10 Kg Capacity , Supplying & Erecting Carbon Dioxide (Co2) Fire Extinguisher User Of Following Capacity With Necessary Cl S Made From 50 X 6 Mm M.S. Flat With Nut & Bolts Grouted In Wall Complete. , [A] For 4.5 Kg Capacity , [B] For 5.5 / 6.5 Kg Capacity , Supplying Fire Bucket Round Bottom Of 9 Litres Capacity Made Out Of 24 Gauge G.I. Sheet With Extra Handle At Bottom Duly Painted White Inside And Red Out Side With Fire Mark, Filled With Dry-Sand And Kept On Existing Stand Provided Or Hung On Wall Hook. , Supplying And Erecting Floor Mounting Stand For Keeping Four Nos. Of Fire Buckets Comprising 1500 Mm In Length, 900 Mm Height Frame Made Out Of 30Mm X30 Mm X 4 Mm Angle Iron With Cross Supports For Legs, Welded With 4 Hooks And Duly Painted With One Coat Of Red Lead And Two Coats Of Approved Enamelled Silver Paint. , Wall Hook 22 To 25 Cms. Projection For Keeping Fire Buckets Made Out Of 15 Mm Dia. M.S Rod Grouted In Wall To A Depth Of Minimum 15 Cms. , Providing And Erecting Metallic Vitrified Danger Notice Board For Medium Voltage Installation To Be Erected As Per Is. , Providing And Erecting Metallic Vitrified Danger Notice Board For High Voltage Installation To Be Erected As Per Is. , Providing & Erecting Medium/Low Voltage Danger Notice Board Sticker Of Standard Size , Providing & Erecting High Voltage Danger Notice Board Sticker Of Standard Size , Supply & Erecting Of Ur 12 Kv, Ir 400A, Isc25ka, Up12kv 50Hz , Supply & Erecting Of 3 C/O + 1 Earth Foult Relay , Supply & Erecting Of 86 High Speed Master Trip Relay 110-125V , Supply & Erecting Of Buach Trip Relay-110-125V , Supply & Erecting Of Wti Trip Relay-110-125V , Supply & Erecting Of Oti Trip Relay-110-125V , Supply & Erecting Of M2-8 Pogrammable Annunciator V2.0 , Supply & Erecting Of Multifunction Meter , Supply & Erecting Of Digital Ammeter , Supply & Erecting Of Digital Voltmeter , Supply & Erecting Of Tnc Switch , Supply & Erecting Of Tch Push Button With L (White) , Supply & Erecting Of Local Remote 2Pole 2Way , Supply & Erecting Of Led Type Indicating L (Red) , Supply & Erecting Of Led Type Indicating L (Yellow) , Supply & Erecting Of Led Type Indicating L (Blue) , Supply & Erecting Of On Led Type Indicating L (Red) , Supply & Erecting Ofoff Led Type Indicating L (Green) , Supply & Erecting Of Trip Led Type Indicating L (Amber) , Supply & Erecting Of Spring Charge Led Type L (Blue) , Supply & Erecting Of Vcb Test Led Type L (White) , Supply & Erecting Of Vcb Service Led Type L (Yellow) , Supply & Erecting Of Close Push Button With Elements(Black) , Supply & Erecting Of Electronic Hooter , Supply & Erecting Of Dc Power Pack(230Vac I/P, 110Vdc O/P) , Supply & Erecting Of 16A Dp 10Ka Mcb With C Curve , Supply & Erecting Of 10A Dp 10Ka Mcb With C Curve , Supply & Erecting Of 6A Dp 10Ka Mcb With C Curve , Supply & Erecting Of 3C/O Relay With Base 110Vdc , Supply & Erecting Of Terminal Type Neutral Link , Supply & Erecting Of Bridge Rectifire , Supply & Erecting Of Heater On/Off Switch , Supply & Erecting Of 5/15A Socket With Switch , Earthing System For Ht 11Kv Charcol , Earthing System For Ht 11Kv Charcol With Upto 3 Mtr Depth , Earthing System For Lt 440 V Chemical Upto 2 Mtr Depth , Earthing System For Lt 440 V Charcol Upto 2 Mtr Depth , One-Time Job For Updating All Preventive Maintenance Of Existing Transformers At C Us 1 (2 Nos.) , Electrical Noc – Clearing All Charges And Exemption Of Legal Fees
Basic Detail
Tender No GEM/2026/B/8090433
Bidding Type Tender
Location
City Ahmedabad
State Gujarat
Key Dates
Publish Date 28 Sep 2026
Submission Date 19 Oct 2026
Open Date 20 Oct 2026
Finance
Tender Value 84.50 Lakhs
Tender Fee Ref. Documents
EMD 2.53 Lakhs
Exemption Available
Document List
80fa6c5b-1f23-406c-8915-a4d329c72b8a.pdf
1790574590.xlsx
1790574605.pdf
1790574619.pdf
1790574624.pdf
1790574673.pdf
1790574684.pdf
atc_5d6f8bd0-eb67-439a-9d3a1790574871227_ikdpurchase1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 28, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Oct 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
pdf

80fa6c5b-1f23-406c-8915-a4d329c72b8a.pdf

xlsx

1790574590.xlsx

pdf

1790574605.pdf

pdf

1790574619.pdf

pdf

1790574624.pdf

pdf

1790574673.pdf

pdf

1790574684.pdf

pdf

atc_5d6f8bd0-eb67-439a-9d3a1790574871227_ikdpurchase1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders