Tender For Construction Of Dinning Block At Trivuban Sahakari University (Tsu) Bhubaneswar C Us.
Tender Value
20.08 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
0 days left
EMD
20090
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Dinning Block At Trivuban Sahakari University (Tsu) Bhubaneswar C Us.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in hard /gravely soil including 50m initial lead& 5m lift initial lift including all labour etc complete |
| 2 | Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 3 | Providing anti-termite treatment using quality chemical approved by Central Insecticides Board, as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate as directed by the manufacturer 50% of the emulsion to be filled in center to center etc. the holes made in trenches at 150mm IS:6313/1981(Part-II) and as per the direction of the Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete.( The payment shall be made on the basis of actual plinth area of the building at ground floor ) |
| 4 | Filling foundation trenches and plinth with excavated earth including watering ramming and compacting in layers not exceeding 150mm thick including labour sundries T&P etc complete and as per direction of engineer -in- charge. |
| 5 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement , 40 mm. size black hard hand broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 6 | Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crusing strength not less then 35Kg/cm2 in cement mortar (1:6) in foundation & plinth . |
| 7 | Fly Ash Brick Masonary (1:6) (Ground Floor Upto 3 mtr ht ):-Providing Flyash bricks(250mmx120mmx80mm size) In Superstructure having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6), immersing the bricks in water before use,splays cutting, circular moulding , corbelling etc.including cost of conveyance ,taxes & royalties,loading and unloading of all materials & cost of all labours , scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . |
| 8 | Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-25 grade in Column base, Column Footings, Raft Foundation, as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position as directed by the Engineer-in-charge. |
| 9 | Plinth Bend |
| 10 | Column & Beam Ground Floor ( Upto 5 mtr Ht) |
| 11 | Lintel Bend Ground Floor (Upto 3mtr Ht) |
| 12 | Chajja projection |
| 13 | Roof slab Ground Floor |
| 14 | Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only. |
| 15 | 6mm thick cement plaster in C M (1:4) over RCC work including watering curing with all cost & convayance and royality etc complete. |
| 16 | 12mm thick cement plaster (1:6) (Upto 3Mtr Ht) on brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm |
| 17 | 16mm thick cement plaster (1:6) on brick work (Upto 3Mtr Ht) including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm |
| 18 | Finishing wall surface of walls with cement based wall putty (water based) Ground Floor of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. Data for 10 sqm. |
| 19 | Wall painting two coats with plastic emulation paint GROUND FLOOR of approved shade on new work to give an even shade including cost of paint per sqm (data for 10 sqm) |
| 20 | Wall Painting 2 coats with weather coat UPTO 3MTR HT to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge. |
| 21 | Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 1200mm ground floor of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 235 of A/R - 2006, item - 1,in other building items chapter.(for new work only) |
| 22 | Supplying, fitting & fixing vetrifed tile in walls of size 600mm x 1200mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 235 of A/R - 2006, item - 1,in other building items chapter.(for new work only) |
| 23 | Supplying, fitting & fixing Granite tile in floors (Ground Floor) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 84 of A/R - 2016, item - 15 (d),in other building items chapter.(for new work only) |
| 24 | Supplying, fitting & fixing Granite tile in floors with (full moulding )of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC |
| 25 | Supplying,fitting,fixing of M.S grill gate/ventilator with cost,convayance,taxes of all materials,labour,T & P etc .required for the complete in all respect. |
| 26 | Supplying, fitting, fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. As per SOR-2022 New Miscellaneous item 25.17 / P-235, Sl no-12. |
| 27 | Supplying, fitting, fixing of Aluminum door with OEL anodized Al. door section of 9202 as vertical member and, 9201as top member and 9200 as bottom & middle mamber and 5 mm plain glass in top portion with 9 mm thick pre laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, etc. complete as per direction of EIC.( data for 3'-0\\" x 6'-6\\" = 19.50 Sft or 1.81 Sqm.)=23.76 kg |
| 28 | Painting 2 coats with approved synthetic enamel paint on steel/wood work over one coat of primer to give an even shade including cost of all materials,labourer,sundries,T & P etc complete as directed by the Engineer-in-charge |
| 29 | Providing fifting and fixing up false celling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.I. grid 2'-0\\"x2'-0\\" to be suspended from celling by using 12.5mm thick Fire Line Gypsum Board including cost of all mateials, all labour,all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 30 | Providing fifting and fixing of premoulded decortive corner beading of Model N0.C443 of GYPSUM INDIA LTD. Having cross section demension 112 x 80mm & fixing the same by providing PVC plug,screw, cornice adhesive, fevicol etc. complete in all respect. |
| 31 | Providing fifting and fixing of Venetian blinds to the window as per approved design including cost, conveyance, taxes etc.complete. |
| 32 | C.C (1:2:4) using 12mm size crusher broken granite metal including watering curing with all cost & convayance and royality etc complete. |
| 33 | Supplying,fabricating,fitting,fixing & erection of M.S Anglur truss and purlins including all cost convenyance etc. Purline made out of M.S Angle/Channel including all material & erection. |
| 34 | Supplying fitting and fixing of precoated Galvanized iron profile sheet semi gloss of total coated thickness 0.45 mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties including fixing of ridges valleys,wind ties etc. complete including cost of sheet and all fitting,all taxes labour,T&P etc.complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender