Tender For Paver Block Pavement Works At Hwp(T) - Phase I
Tender Value
54.68 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
12 days left
EMD
1.09 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Paver Block Pavement Works At Hwp(T) - Phase I
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation to required level and profile for paver block works/pedestals/kerb wall/under floor in all types of soils, red gravel fill other than soft and hard rock upto a depth not exceeding 1.00 M from original average ground level, back filling in plinth and around foundations with excavated soil in layers not exceeding 150 MM, watering, consolidating including disposing off surplus earth within a distance of 500 Mts etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 2 | Providing and laying plain cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) using 40/20 mm nominal size stone aggregate of approved quality for foundations, kerb wall including form work, consolidation, leveling, finishing and curing etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 3 | Providing and laying brick Masonry in storm water drain/kerb wall with Cement mortar 1:6 (1 cement: 6 coarse sand) using common burnt clay bricks of class designation 7.5 including racking of joints, curing etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 4 | Providing and laying 115 mm thick brick masonry in kerb wall/collection pits/storm water drains with cement mortar 1:4 ( 1 cement : 4 coarse sand) using common burnt clay bricks of class designation 7.5 including racking of joints, hacking cc floor, key in existing brick wall, curing etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 5 | Providing and laying 12 mm thick plaster in Cement mortar 1:6 ( 1 Cement : 6 coarse sand) on concrete/brick masonry surfaces including hacking of concrete surfaces, curing etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 6 | Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam (WMM) in layers of 200 mm thick including premixing the materials with water at OMC in mechnanical mix plant, carriage of mixed material by tipper to site, laying in layers of specified thickness by mechanical means in Sub base on well prepared surface and compacting with 10 to 12 tonne capacity vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., all complete as per clause 406 of MORTH Rev-5, drawings and as directed by the Engineer. |
| 7 | Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam (WMM) in layers of 200 mm thick including premixing the materials with water at OMC in mechnanical mix plant, carriage of mixed material by tipper to site, laying in layers of specified thickness by manual means in Sub base on well prepared surface and compacting with 02 to 03 tonne capacity earth rammer to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., all complete as per clause 406 of MORTH Rev-5, drawings and as directed by the Engineer. |
| 8 | Providing and laying factory made chamfered edge 80mm thick (minimum) cement concrete paver blocks of M-35 grade (minimum) in drive ways of heavy vehicle (40 MT) of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand / 6 - 10 mm hard stone aggregates, compacting and proper embedding/laying of inter locking paver blocks into the sand / stone aggregates bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size pattern, finishing and sweeping extra sand etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 9 | Providing, laying and fixing in position Fe 500-D grade TMT reinforcement steel of M/s.SAIL/TATA/VIZAG brand conforming to IS 1786 for all reinforced cement concrete works including cutting, bending, supplying and binding with 16 gauge MS annealed wire, supplying and laying spacer blocks etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 10 | Providing and laying cast - in - situ machine mixed cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) reinforced cement concrete for pedestals, pavement including shuttering, required alignment, consolidating, finishing, curing etc., all complete as per drawings, specifications and as directed by the Engineer, but excluding cost of reinforcement steel. |
| 11 | Providing, hoisting and fixing precast reinforced cement concrete slab for process drain chambers in the proportion 1:1.5:3 (1 Cement: 1.5 coarse sand: 3graded stone aggregate 20 mm nominal size) including setting in position with cement mortar 1:3 (1 cement: 3 coarse sand), including required centering/ shuttering, finishing with neat cement on exposed surfaces and curing but excluding cost of reinforcement all complete as per drawings, specifications and as directed by the Engineer. |
| 12 | Providing and laying plain cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate) using 20/12 mm nominal size stone aggregate of approved quality for ramp/pavement edges wherever required including consolidating, finishing, curing etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 13 | Providing and laying cement concrete flooring 1:2:4 (one part of cement: two parts of fine aggregate: four parts of coarse aggregate 12.5mm and down grade) of average 40 mm thickness in panels of less than 2.00 sqm plan area by providing glass strips 4 mm thick x 40 mm deep (average) including alignment, level, consolidation, neat cement finishing, curing etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 14 | Providing and laying cement concrete flooring 1:2:4 (one part of cement: two parts of fine aggregate: four parts of coarse aggregate 12.5mm and down grade) of average 40 mm thickness in storm water drains, collection pits including alignment, level, consolidation, neat cement finishing, curing etc., all complete as per drawings, specifications and as directed by the Engineer. |
| 15 | Providing and laying non-pressure NP-2 class (light duty) R.C.C pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.., all complete at all levels as per drawings, specifications and as directed by the Engineer.15.1) 150mm dia pipes |
| 16 | 300mm dia pipes |
| 17 | Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within a lead of 50 mts etc..,all complete as per drawings, specifications and as directed by the Engineer. |
| 18 | Demolishing concrete floor manually/mechanical means including stacking of serviceable materials at store and disposing unserviceable material within a lead of 500 mts etc..,all complete as per drawings, specifications and as directed by the Engineer. |
| 19 | Demolishing brick work manually / mechanical means including stacking of serviceable materials at store and disposing of unserviceable material to a lead of 500 mts etc..,all complete as per drawings, specifications and as directed by the Engineer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender