Tender For Bmc For Maintenance Of Rolling Shutters, Collapsible And Sliding Doors
Tender Value
11.97 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
7 days left
EMD
23941
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Bmc For Maintenance Of Rolling Shutters, Collapsible And Sliding Doors
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Oct-2026 | CORRIGENDUM NO.1 | Date | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Servicing the rolling shutters, sliding doors and collapsible gates which includes greasing, oiling, overhauling and replacing defective spare parts, including cost of labour, cost of scaffolding work with CSL supplied scaffolding materials, sundries, general cleaning, filling oil in gear set but excluding cost of spare parts which will be paid separately. (Replacement bolts and nuts, screws, pins, etc. is to be done by the contractor without any extra cost. Other all spare parts will be measured and paid as per relevant item. Rate is for one time operation and is valid and effective for 6 months without any operational problem from the date of overhauling). |
| 2 | Rolling shutters-Upto 10 m2 |
| 3 | Rolling shutters- Between 10 m2 to 20 m2 |
| 4 | Rolling shutters- Between 20 m2 to 30 m2 |
| 5 | Rolling shutters- Between 30 m2 to 40 m2 |
| 6 | Rolling shutters- Between 40 m2 to 50 m2 |
| 7 | Sliding doors and collapsible gates- Upto 10 m2 |
| 8 | Sliding doors and collapsible gates- Between 10 m2 to 20 m2 |
| 9 | Sliding doors and collapsible gates- Between 20 m2 to 30 m2 |
| 10 | Sliding doors and collapsible gates- Between 30 m2 to 40 m2 |
| 11 | Sliding doors and collapsible gates- Between 40 m2 to 50 m2 |
| 12 | Supplying the following good quality genuine spare parts of approved make (Asian/ Anand/ Premier/ Kaniampuram) for the rolling shutters including cost, loading, unloading and conveyance. |
| 13 | Axle spring size 600mm/8mm - 24\\" |
| 14 | Axle spring size 600mm/8mm - 21\\" |
| 15 | Axle spring size 450mm/7mm - 18\\" |
| 16 | Axle bearing pulley 7\\" dia. Size |
| 17 | Gear set with box, Bracket, worm wheel & pinion |
| 18 | Ball bearing SKF/NBNI |
| 19 | Lock plate/ bottom plate 14g - 2mm thick with all accessories including handle etc. Complete |
| 20 | Leaf (lathes) 20guage |
| 21 | Top cover 22 guage |
| 22 | Top cover 24 guage |
| 23 | Guide channel 14guage - 2mm thick |
| 24 | Bracket 14\\" dia. 2mm thick |
| 25 | MS Pipe 37.5mm or higher size |
| 26 | Lock set 1 pair |
| 27 | Worm wheel male and female of Rolling shutters |
| 28 | Carrying out miscellaneous works by arranging various categories of labour in connection with the repair and maintenance of rolling shutters. |
| 29 | Fitter/Welder |
| 30 | Painting the rolling shutters with paint of approved quality and colour after rubbing and cleaning the surface including cost and conveyance of all materials, labour etc. complete. |
| 31 | One coat zinc chromate primer on old work |
| 32 | One coat Synthetic enamel paint on old work |
| 33 | Two coat Synthetic enamel paint on old work |
| 34 | Fabricating structural steel works including erecting in position, aligning the erected structures in line and level, bolting or welding wherever required, painting with two coats of synthetic enamel paint over one coat of zinchromate primer, conveyance of all materials, all accessories, hire charge of tools and plants, welding equipment, cost of electrodes, cost of bolts, nuts and washers, all labour, loading, unloading, other incidentals, etc. complete. (Provision of bolt holes to be made as required at no extra cost). |
| 35 | Using departmental supplied Steel |
| 36 | Using Contractor's Supply including cost of all materials- M.S. pipe |
| 37 | Using Contractor's Supply including cost of all materials- Structural steel |
| 38 | Supplying and fixing rolling shutters of approved make (Asian/ Anand/ Premier/ Kaniampuram) made of 80x1.25mm M.S laths interlocked together through their entire length and joined together at the end by designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation, including 1.25 mm thick top cover, cost of all materials, labour charge, cost of scaffolding work with CSL supplied scaffolding materials, plastering of wall in hinge fixing areas, cost of one coat zinchromate primer and two coat synthetic enamel paint etc. complete. |
| 39 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40mm dia. steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including cost of all materials, labour charge, cost of scaffolding work with CSL supplied scaffolding materials, plastering of wall in hinge fixing areas, painting with two coats of synthetic enamel paint over two coats of zinc chromate primer etc. complete. |
| 40 | Repairing steel windows/doors including repairing hinges, frames, renewing putty etc. complete. (MS structurals for repair work will be measured and paid separately). |
| 41 | Painting of steel windows with synthetic enamel paint one coat after cleaning the surface including all materials & labour cost. |
| 42 | Repairing steel windows/doors including repairing hinges, frames, renewing putty etc. complete. (MS structurals for repair work will be measured and paid separately). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender