Tender For Special Repair To Bldg No P-07 (Otm Accn) And Allied Works At Hq Sqn 130 Armd Bde At Akhnoor Mil Stn Under Ge (S) Akhnoor.
Tender Value
36.53 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
14 days left
EMD
73060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-07 (Otm Accn) And Allied Works At Hq Sqn 130 Armd Bde At Akhnoor Mil Stn Under Ge (S) Akhnoor.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed. |
| 2 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, joints filled with bitumen sand mixed 50mm thick, finished even and fair without using extra cement, complete all as specified and directed. |
| 3 | M&L for 25mm thick PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggte) as in floors finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match Shade, pattern, laying etc, including screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes in cement mortar 1:6 as directed at site, complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement and sand mortar 1:4, finishes even and rough, complete all as specified and directed. |
| 6 | M&L for machine cut kota stone slab flooring 16-18mm thick over and included cement screed base of 20mm thick cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 7 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 8 | Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 9 | M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade, including 10mm thick in cement mortar 1:4 on fair faces of brick work finished even and fair to receive tiles complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for machine cut kota stone 16-18mm thick as in riser of steps, skirting, dado and pillar ,over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 10mm thick plaster in cement concrete 1:3 for laying Kota Stone, complete all as specified and directed. |
| 11 | M&L for Sunken treatment as follows :(a) Demolition for cement concrete exc 15cm thickness but above ground floor as sunken floor , complete all as specified and as directed .“(b) All pipe passing through the wall of sunken floor shall be laid before the water proofing treatment is carried out and one number 50mm bore 500mm long medium grade 50mm GI pipe spout with SS wire gauge on inside mouth shall be provided.(c) Rendering of uneven surface with 10mm thick cement mortar 1:4 mixed with IWPC to make it even.(d) All junction of side wall where pipes are passing through shall be sealed with epoxy putty.(e) After cleaning apply three coat of polymer modified cementious water proof coating as per manufacturer instruction to bottom and vertical sides upto skirting height of the floors, proportion & applications as per manufacturer instruction.(f) The water proofed area shall be tested by filling water for at least 03 days. In case any leakage is noticed water proofing treatment shall be re-done and re-tested.(g) The sunken floor and sides of wall upto skirting height shall be plastered with 15mm thick cement mortar 1:4 mixed with IWPC @ 3% by weight including rounding at corner and junction sloping towards spout. Please Enable Macros to View BoQ information |
| 12 | M&L for Sunken treatment as follows :(a) Demolition for cement concrete exc 15cm thickness but above ground floor as sunken floor , complete all as specified and as directed .“(b) All pipe passing through the wall of sunken floor shall be laid before the water proofing treatment is carried out and one number 50mm bore 500mm long medium grade 50mm GI pipe spout with SS wire gauge on inside mouth shall be provided.(c) Rendering of uneven surface with 10mm thick cement mortar 1:4 mixed with IWPC to make it even.(d) All junction of side wall where pipes are passing through shall be sealed with epoxy putty.(e) After cleaning apply three coat of polymer modified cementious water proof coating as per manufacturer instruction to bottom and vertical sides upto skirting height of the floors, proportion & applications as per manufacturer instruction.(f) The water proofed area shall be tested by filling water for at least 03 days. In case any leakage is noticed water proofing treatment shall be re-done and re-tested.(g) The sunken floor and sides of wall upto skirting height shall be plastered with 15mm thick cement mortar 1:4 mixed with IWPC @ 3% by weight including rounding at corner and junction sloping towards spout. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender