Tender For Repair/Maintenance Of External Water Supply Network, Pump Set, Ug/Oh Water Reservoir At Ghatkopar And Vikhroli Area Under Ge (N) Santacruz Mumbai
Tender Value
10 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
13 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of External Water Supply Network, Pump Set, Ug/Oh Water Reservoir At Ghatkopar And Vikhroli Area Under Ge (N) Santacruz Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, and getting out in hard/dense soil for exposing pipes, etc., complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Returning and filling in, including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick, complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Supply, lay and joint in repairs, including taking up existing unserviceable 150 mm bore ductile iron pipe (DN 150), spigot and socket ends, Class K7, with rubber gasket (Tyton) joints and all necessary fittings, laid in trenches, including cutting to required lengths to match existing fittings/pipes or insertion of new CI specials, complete all as specified and as directed by Engineer-in-Charge.Make: TISCO / Electrosteel / Kesoram / Lanco / Jindal / Kalinga / Kapilansh |
| 5 | Supply, lay and joint in repairs, including taking up existing unserviceable 100 mm bore ductile iron pipe (DN 100), spigot and socket ends, Class K7, with rubber gasket (Tyton) joints and all necessary fittings, laid in trenches, including cutting to required lengths to match existing fittings/pipes or insertion of new CI specials, complete all as specified and as directed by Engineer-in-Charge.Make: TISCO / Electrosteel / Kesoram / Lanco / Jindal / Kalinga / Kapilansh |
| 6 | Supply and fix in repairs, including taking down existing unserviceable GI pipe, medium-grade galvanised steel water tubing with all fittings such as tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces, conforming to IS 1239, fixed to walls/ceilings or laid in floors with suitable size GI clamps, including making good disturbed surfaces, complete all as specified and as directed by Engineer-in-Charge.Make: Tata / Jindal / Surya Prakash / Zenith |
| 7 | 80 mm bore GI pipe |
| 8 | 50 mm bore GI pipe |
| 9 | 40 mm bore GI pipe |
| 10 | 25 mm bore GI pipe |
| 11 | 20 mm bore GI pipe |
| 12 | 15 mm bore GI pipe |
| 13 | Supply and fix in repairs gunmetal gate valve with iron wheel head, screwed at both ends for iron pipes, including taking down the existing valve, complete all as specified and as directed by Engineer-in-Charge.Make: Kirloskar / Zoloto / Upadhaya / Leader / BIR |
| 14 | 50 mm bore |
| 15 | 40 mm bore |
| 16 | 25 mm bore |
| 17 | Supply, fix, joint and test in repairs heavy-duty cast iron sluice valve with stainless steel spindle, PN 1.6, iron wheel head and coupling at both ends for cast iron pipes, including nuts, bolts, rubber gaskets and taking down the existing unserviceable sluice valve, complete all as specified and as directed by Engineer-in-Charge.Make: Kirloskar / Upadhaya / Leader / BIR |
| 18 | 150 mm dia |
| 19 | 100 mm dia |
| 20 | 80 mm dia |
| 21 | Material and labour in repairs for construction of new valve chamber, including necessary excavation and earthwork in any type of soil; 100 mm thick PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in base with 150 mm offset; 230 mm thick brickwork in cement mortar 1:6; 10 mm thick internal rendering and 15 mm thick external rendering in cement mortar 1:4; 50 mm thick PCC 1:2:4 Type B-1 as coping; 6 mm thick MS cover with hinges and locking arrangement fixed to angle iron frame of 40 x 40 x 6 mm MS angles; two coats of synthetic enamel paint over one coat of red zinc chrome primer on all metal surfaces; and three coats of whitewash on all plastered surfaces, including dismantling the existing unserviceable valve chamber with rusted MS cover without disturbing the existing pipeline, complete all as specified and as directed by Engineer-in-Charge. |
| 22 | 1200 x 1200 x 600 mm internal size |
| 23 | 900 x 900 x 600 mm internal size |
| 24 | Material and labour for desludging/desilting underground sedimentation reservoir of 150,000 gallons capacity by draining out water/sludge; removing scales, dirt, algae and other growth from floor, roof, internal surfaces and mouths of circulating pipes by wire brushing and high-pressure cleaning with rotary equipment and approved detergent; sucking out dirty water; disinfecting with approved chemical solution to make the surfaces bacteria-free; and finally cleaning with fresh water, including removal of all dirt to a distance not exceeding 50 m and cleaning the surrounding area within 5 m radius by removing vegetation, bushes, mud, dirt and dust and shifting the same to a distance not exceeding 50 m, complete all as specified and as directed by Engineer-in-Charge. |
| 25 | All as per Item No. 10 described hereinbefore, but for 60,000 gallons capacity. |
| 26 | All as per Item No. 10 described hereinbefore, but for 5,000 gallons capacity. |
| 27 | Rewinding of motor, both stator and rotor, with super-enamelled copper wire of the same size to match the existing pump-set motor, including replacement of worn-out bearings as required, complete all as specified and as directed by Engineer-in-Charge. |
| 28 | 20 HP motor |
| 29 | 10 HP motor |
| 30 | 5/7.5 HP motor |
| 31 | Material and labour for painting motor/pump bases and discharge and suction pipes within the pump house area, including thorough scraping and preparation of existing corroded painted surfaces and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Supply and fix swing-type foot valve of size 80 mm dia conforming to IS 4038 and PN 0.2, of rigid and sturdy design with minimum loss of head across the valve, including necessary fixing arrangements and taking down the existing valve, complete all as specified and as directed by Engineer-in-Charge.Make: Kirloskar / Kartar / Normex. |
| 33 | Supply and fix swing-type foot valve of size 50 mm dia conforming to IS 4038 and PN 0.2, of rigid and sturdy design with minimum loss of head across the valve, including necessary fixing arrangements and taking down the existing valve, complete all as specified and as directed by Engineer-in-Charge.Make: Kirloskar / Kartar / Normex |
| 34 | Material and labour for cutting existing bituminous road/hardstanding to a width not exceeding 450 mm and depth not less than 450 mm for passing GI pipe, and making good the disturbed surface by filling with excavated material and providing 200 mm thick PCC 1:3:6 Type C-1 using 20 mm graded aggregate at top, complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Material and labour for chart/poster/diagram/name plate made from 3 mm thick Perspex sheet, size 1.0 m x 1.0 m, with coloured background, diagram and lettering, including fixing with screws/adhesive as required, complete all as specified and as directed by Engineer-in-Charge.Note: The board shall indicate the following: Type of Pump, Make, Capacity, Discharge, Year of Installation and MES No. |
| 36 | Supply and fix in repairs dial-type pressure gauge for measurement of water pressure up to 5 kg/cm², matching the existing size, complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Cutting undergrowth, bushes, grass and small plants at the installation as directed, including removal from site and depositing at a distance not exceeding 50 m, complete all as directed by Engineer-in-Charge. |
| 38 | Cleaning of valve pit/chamber of any size by taking out mud and muddy water and depositing the same at a distance not exceeding 20 m from the pit, including sweeping and cleaning all dirt and rectifying leakage of valves of any size using appropriate packing material as required, complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Material and labour in repairs for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in an earth pit not less than 2.25 m deep below normal ground level with the top edge of the plate not less than 1.5 m below normal ground level; connected with 25 x 3 mm GI earth strip, 7.5 m long, from earth point to test point and further connected to control board/panel/equipment; laid under floors/plinths or fixed/concealed on walls as required with galvanised iron/steel bolts, nuts, check nuts and washers; including charcoal and common salt packed minimum 150 mm all around the earth plate; protection with 32 mm bore light-grade GI pipe; PCC pit in PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate; 50 x 50 x 5 mm MS angle iron frame; cast iron cover with locking arrangement; 20 mm bore medium-grade GI pipe and CI funnel with wire mesh for watering arrangement; necessary excavation and earthwork in any type of soil/strata; and testing, all as shown in Electrical Plate No. 3 of MES Schedule Part-I 2009, complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Fabrication and fixing of steel ladder using 50 mm dia GI pipe, 5 m long, with 25 mm dia GI pipe cross-steps at 300 mm centres, duly welded, including two coats of bituminous black paint and necessary fixing arrangements with MS clamps, nuts and bolts duly grouted to walls/floors, complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Supply and fix gland seal for pump motor and sluice valves of any size, complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labour for replacement of valve chamber cover/UG sump cover comprising angle iron frame fabricated from 40 x 40 x 6 mm MS angles and 3 mm thick MS sheet of Fe-410W (Grade E-250), Quality-B, with handle and hinged at one side, including two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Material and labour for scheduled maintenance and servicing, on each occasion as ordered, of existing electro-mechanical machinery comprising centrifugal pump motors and accessories of any type, make and model, including cleaning parts, removal of corrosion, refixing and rectification of leakage due to loose nuts/studs, gland packing/gland rope/star packing, clamps, washers, etc. of suitable size as required, complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Material and labour for repairing of pipe line by welding of GI/CI fitting of size 20-65mm dia at various locations to prevent leakage of water by welding of flanged / sockets / collars, ferrule or at the joints of including GP Joint, T joint, sluice valves / air release valve / non return valves or damaged pipeline etc., including necessary excavation and returning and filling and making disturbed surface good complete all as specified and as directed by Engineer-in-Charge. Note : GI / CI pipe will be paid separately with their respective item. |
| 45 | Material and labour for repairing of pipe line by welding of GI/CI fitting of size 80-150mm dia at various locations to prevent leakage of water by welding of flanged / sockets / collars, ferrule or at the joints of including GP Joint, T joint, sluice valves / air release valve / non return valves or damaged pipeline etc., including necessary excavation and returning and filling and making disturbed surface good complete all as specified and as directed by Engineer-in-Charge. Note : GI / CI pipe will be paid separately with their respective item. |
| 46 | Material and labour for 8 mm thick MS sheet circular cover, 750 mm dia, with hinges and locking arrangement, fixed to circular angle iron frame made from 40 x 40 x 6 mm MS angles to cover UG sump openings, including two coats of synthetic enamel paint over one coat of red zinc chrome primer on all metal surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 47,350.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender