Tender For Repair To Chain Link Fencing, Security Compound Wall And Drain At installation Kardip. 8874/E8
Tender Value
18 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
14 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Chain Link Fencing, Security Compound Wall And Drain At installation Kardip. 8874/E8
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts/strut (wood, steel or RCC ) any section embeded in natural or concrete ground including taking out embeded portion and making good complete all as specified and direct. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Dismantling fencing wire mesh any type or in any position complete all as specified and as directed |
| 4 | Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and mixed with earth around, inlayers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft/loose soil complete all as specified and as directed. |
| 5 | M&L for cement concrete type C2 1:3:6 (40mm graded aggregates) in foundation filling and mass concrete . |
| 6 | S&F mild steel works such as hand rail, half round or other stock section or core for wooden hand-rail straight portion drilled and counter sunk for baluster, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing with bolts post and strut in fencing including cutting tops to shape as directed dilling holes notcning for wire etc, flat iron fillets for securing fencing mesh including all necessary drilling, bolting or rivetting etc and similar work using rolled section confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 7 | M&L for round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed. |
| 8 | S&F in repair mild steel bolt having dia of neck exc 12mm but not exc 20mm purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 30 cm long complete all as specified and as directed. |
| 9 | S&F PVC Vinyl coated GI Chain link mesh of size 50mm x 50mm made out of 3.60mm dia GI Wire 1.00mm thick on both sides PVC Coating all as specified and as directed Note :- (a) The dia of mesh wire after PVC Coating will be 5.60mm.(b) The PVC Coating shall be green in colour (c) The GI Chain link mesh with PVC Coating shall be weighed for the purpose of payment. (d) The weight of chain link shall not be less than 5.6kg/sqm with and including PVC coating |
| 10 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed |
| 11 | M&L for preparation of new steel surfaces of any description not otherwise described not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed |
| 12 | Supply and fix Galvanized, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including secruing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured) |
| 13 | Material and labour for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ as in coping, kerbs or mud stops, rounded or chamfered on edges, as directed including use of form work as necessary all as specified and as directed. |
| 14 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for coping, benching etc complete all as specified and as directed. |
| 15 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete |
| 16 | M&L for providing pre cast reinforced cement concrete type B-1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, posts and struts average section area exc 100 sqcm and n.exc 250 sqcm complete all as specified and as directed. |
| 17 | Dismantling of Brick or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed. |
| 18 | M&L for providing precast cement concrete block masonry type C1 1:3:6(20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed. |
| 19 | M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces on wall complete all as specified and directed. |
| 20 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 21 | Schedule of Credit (Minus) Rs.28975.00 NOTE: Bidder shall insert credit amount of Rs. 28975.00 as rate in Green field under Col-13. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender