Tender For Repair To Path, Retaining Wall, Compound Wall, Fencing, Perapets Hard Standing Etc At Rms Chail Under Ge (I) Jutogh
Tender Value
20 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
15 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Path, Retaining Wall, Compound Wall, Fencing, Perapets Hard Standing Etc At Rms Chail Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed. |
| 2 | M&L for walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted built in CM 1:6, complete all as specified and directed. |
| 3 | All as per Srl item No 02.00 above but Except stone, complete all as specified and directed. Note: Old stone obtained from demolition shall be reused. |
| 4 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 5 | M&L for precast cement concrete 1:3:6, type C-1, using 20 mm graded crushed stone aggregate as in window or door cills, lintels, bressumers, steps, quoin blocks, kneelers, apex stones, pier caps, coulmns, posts, bed plates, pintel blocks, anchorage blocks, bonders , plinth courses, copings, cover slab and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete and setting with CM 1:4 with joints to match, complete all as specified and directed. |
| 6 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 7 | M&L for 75mm thick, PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base including finishing the surface even and smooth using extra cement, complete all as specified and directed. |
| 8 | M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS -15658 - 2006 of 80 mm thick, M-40 Grade, with grey cement and pigment set over sand cushioning, sand filling will be paid separately, complete all as specified and directed |
| 9 | M&L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed. |
| 10 | Dismantling of floor hearth or wall tiling/stone slab includingcement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. |
| 11 | M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, with Grey cement and no pigment set jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer of mortar in CM 1:4, complete all as specified and directed. |
| 12 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 13 | M&L for 40mm thick, PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in floor, hard standing, path etc finished even and smooth without using extra cement complete all as specified and directed |
| 14 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and fair, including taking down, complete all as specified and directed. |
| 15 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces, complete all as specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description, complete all as specified and directed. |
| 17 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground/natural ground, complete all as specified and directed. |
| 18 | Excavating in post holes or similar holes) each n exc 0.5 cum, getting out, in soft / disintegrated rock returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, complete all as specified and directed. |
| 19 | M&L for providing cement concrete 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in post holes, complete all as specified and directed. |
| 20 | M&L for rolled mild steel of in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths as in post holes), Fe-410-W, (Gde- E-250), quality- B, complete all as specified and directed. |
| 21 | Dismantling expanded metal, any thickness or mesh, fixed in fencing with steel or wood fillets exc. 4 kg, if any, complete all as specified and directed. |
| 22 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 23 | S&F TMT bars 10 mm dia and over cut to length bent to shape required including bending hooking, binding with MS wire not less than 0.9 mm dia, complete all as specified and directed. |
| 24 | Supply chain link M S Galvanised fencing any size or type, complete all as specified and directed. |
| 25 | Fixing only chain link fencing of GI wire 4mm dia in mesh of size 100 mm x 100mm including line wires and fixed complete to the fencing posts, complete all as specified and directed. |
| 26 | S&F mild steel work as in hand rails half round or other steel section or core for wooden hand rail straight portion drilled and counter sunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts, post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets securing wire mesh including all necessary drilling bolting and similar work confirming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 27 | M&L for two coats of synthetic enameled paint on steel and iron surface over 10 cm width or girth including preparation of new surface over a coat of red oxide primer, complete all as specified and directed. |
| 28 | S&F of single side single “W” metal crash barrier comprising of cold formed W profiled section having thickness 3mm (uncoated thickness) with frame width of 311 mm depth 83 mm and length 4318 mm (made of IS marked HR coils conforming to IS 5986/ 2011) spaced 2.00 m C/C of the post which will be 1.0m above top of beam/ wall with 300x300x 10mm thick base plate fixed by 04 Nos anchor bolt 10 dia to beam/ wall. Metal beam rail to be fixed on the vertical post with spacer channel of cold formed channel section size 150x75x5mm and 330mm long (made of IS marked HR coils conforming to IS 5986/2011), All the above components shall conform to clause 810 of MORTH specifications including all fittings required for erection on road side W-beams, posts, spacers shall be hot dip galvanized with zinc coating of 550 gm/Sqm. All bolts, nuts and washers shall also be hot dip galvanized to IS : 1367 pt-XIII/1983 (Re-affirmed 2011) for bolts and IS 14394/1996 (reaffirmed 2011) for nuts including carriage of material in all leads and lifts, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender