Tender For Repair/ Replacement Of Boundary Wall, Retaining Wall, Fencing And Other Misc Works In The Area Of Kufri, Shimla And Jutogh Cantt Under Ge (I) Jutogh
Tender Value
40 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
2 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Boundary Wall, Retaining Wall, Fencing And Other Misc Works In The Area Of Kufri, Shimla And Jutogh Cantt Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors or pavings not exceeding 15cm thickness below or above ground level and removal of demolished material out of MoD land, complete all as specified and directed. |
| 2 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 3 | M&L for 40 mm thick, PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in flooring finished even and smooth surface complete all as specified and directed. |
| 4 | M&L for 75mm thick, PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring, complete all as specified and directed. |
| 5 | M&L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and pigment set, complete all as specified and directed. |
| 6 | M&L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment set, complete all as specified and directed. |
| 7 | M&L for sand filling under floors, below paver blocks or in foundation including watering and consolidation, complete all as specified and directed. |
| 8 | M&L for coloured chequred cement conc tiles (30cmx30cmx25mm thick) in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 9 | S&F plain cement concrete paver blocks of cobble stone pattern, 80mm thick of approved colour (red, black, grey, yellow, dholpur, coffee, green, cream, dark green ect,) for use in roadside paths, parks, parking areas and similar works. The exact sizes and combination of multiple sizes of paver blocks shall be finalized by the Engr-in-Charge after approval of the sample. The pattern shall mandatorily consist of not less than three different durable finish, complete all as specified and directed. |
| 10 | Dismantling of floor hearth or wall tiling/ stone slab including cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. |
| 11 | M&L for 16-18 mm thick jet black granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in CM(1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 12 | M&L of wall cladding glazed ceramic tiles in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing in to layer coat in CM 1:4, complete all as specified and directed. |
| 13 | M&L for 8-10mm thick vitrified coloured paver tiles (Endura tiles) of size 300 x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 14 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in surface channel and drain etc., including necessary formwork and smooth fair finish, complete all as specified and directed. |
| 15 | Demolition of brick or stone masonry built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed. |
| 16 | M&L for brick work with sub class 'B' bricks old size straight or curved on plan built in CM 1:4, complete all as specified and directed. |
| 17 | M&L for brick work with fly ash bricks, straight or curvedon plan exc 6m mean radius, built in old size straight or curved on plan built in CM 1:6, complete all as specified and directed. |
| 18 | M&L for walling of random rubble stone masonry, brought up to courses, well bonded, bedded and solidly hearted built in CM 1:6 including raking or cutting out joints complete all as specified and directed. |
| 19 | All as per Srl item No 18.00 above but \\"except stone\\" complete all as specified and directed. |
| 20 | M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as bonder stone set in cement mortar 1:6, complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 22 | M&L for plastering work 15 mm thick on fair surfaces of stone masonry, brick or concrete surfaces (1:4) to be finished even and fair (without using extra lime or cement) complete all as specified and directed. |
| 23 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought up to coarse in CM (1:4) including raking out existing pointing etc., complete all as specified and directed. |
| 24 | M&L for hand packing with broken stone or boulders (any thickness) at back of walls over arches etc. & raising (or lowering) to the required level, complete all as specified and directed. |
| 25 | M&L for applying two or more coats of 100% premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building/ tower, complete all as specified and directed. |
| 26 | M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.. |
| 27 | S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 28 | S&F 5 mm thick plain (solid) poly carbonate translucent sheeting fixed with self tapping, screw and dismantling of old sheet complete all as specified and directed. |
| 29 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 30 | Excavating in post holes hard/ dense soil (or similar holes) each n. exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard/ dense soil, complete all as specified and directed. |
| 31 | Dismantling of barbed wire any type and in any position, neatly coiled and removing from site complete all as specified and directed. |
| 32 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed. |
| 33 | Supply only chain link fencing made from 3mm to 4mm dia mild steel galvanised wire having mesh size 100mm x 100mm/100mm x 50mm, complete all as specified and directed. |
| 34 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc., (each line wire to be measured), complete all as specified and directed. |
| 35 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc., complete all as specified and directed. |
| 36 | S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete & screwing etc. wind ties for roof including securing bolts, posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165, complete all as specified and directed. |
| 37 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 38 | M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape, hooking ends for tying chain link fencing complete all as specified and directed. |
| 39 | S&F framed work as in steel gate in such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe-290, Gde -E-165, including all fittings and fixtures etc., complete all as specified and directed. |
| 40 | S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W (Gde-E- 250) quality-A etc., complete all as specified and directed. |
| 41 | S&F welded steel wire fabric weight (n.exc 4kg) complete to wood or steel members etc., complete all as specified and directed. |
| 42 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping to retaining walls/ steps/ parapet/ kerbs/ base of railing post etc., including necessary formwork complete all as specified and directed. |
| 43 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness including Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. |
| 44 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 45 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 46 | M&L for applying 2 mm thick wall care putty of old /new decorated plastered or unplastered surfaces of wall complete all as specified and directed |
| 47 | Removing weed vegetation, moss, small shrubs and rubbish material on chajjas, roofs, wallsat any position and at any situation in ground floor, roof or in 2nd floor , ACC roof parapets and making good with cement plaster or surface finish as existing surface complete all as specified and directed. |
| 48 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. Please Enable Macros to View BoQ information |
| 49 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender