Tender For Special Repair To Road Shoulders From Inf Bn No 1 Rp Post To Mt Gate, Tcp No 04 To Ocf Guest Room, Mg Road Qtrs (Gate No. 2) To Subhash Road Tiraha, Dental Section To Infantry Chowk, Maulana Azad Road Infront Of Musem, Echs To Kv No 1 Shco
Tender Value
1.45 Crore
Estimated cost
Bid Submission
24 Oct 2026
21 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shahjahanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Road Shoulders From Inf Bn No 1 Rp Post To Mt Gate, Tcp No 04 To Ocf Guest Room, Mg Road Qtrs (Gate No. 2) To Subhash Road Tiraha, Dental Section To Infantry Chowk, Maulana Azad Road Infront Of Musem, Echs To Kv No 1 Shcool At Shahjahanpur Cantt Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPECIAL REPAIR TO ROAD SHOULDERS FROM INF BN NO 1 RP POST TO MT GATE, TCP NO 04 TO OCF GUEST ROOM, MG ROAD QTRS (GATE NO. 2) TO SUBHASH ROAD TIRAHA, DENTAL SECTION TO INFANTRY CHOWK, MAULANA AZAD ROAD INFRONT OF MUSEM, ECHS TO KV NO 1 SHCOOL AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY Contract No : CWE / BLY / GE(E) /122 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of bricks (laid flat or on edge) on brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed. |
| 3 | M&L for brick work with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in culvert/ road berm complete all as specified and directed. |
| 4 | M&L for 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or concrete surfacesusing water proofing compound @3% by weight of cement content complete all as specified and directed. |
| 5 | M&L for preparation of finishing walls and applying two coats of synthetic enamel paint over a coat of primer and putty complete all as specified and directed. |
| 6 | M&L for 100 mm thick cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed. |
| 7 | M&L for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 8 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 9 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), incl making joints with or without grooves (thick of joints except at sharp curve shall not to more than 5 mm), incl making drainage opening wherever required complete all as specified and as directed. |
| 10 | M&L repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth and making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) but making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet 2 cm thick, well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand) and again well rammed (including supply of premixed binder and sand) depth of pot hole n.exc. 30mm complete all as specified and directed. |
| 11 | M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed. |
| 12 | M&L for applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre (Paving bitumen grade VG-10) complete all as specified and directed. |
| 13 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm and depth n exc 50 mm deep complete all as specified and directed. |
| 14 | M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. |
| 15 | M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed.(Note :- (i) Design Mix for SDAC shall be carried out and the cost of testing shall be included in the quoted rate.(ii) Aggregate for bituminous works shall confirm to clause No 20B 2.5 of SSR 2009 Part-I (Specifications) with the following constraints:- Aggregate passing 13.2 mmIS Seive- 100%, Aggregate Passing 5.60mm IS Seive- 40% to 50%, Aggregate passing 2.8mm IS Seive- 30% to 35%, (iii) Based on job formula , in case the binder content (i.e. Bitumen)is less than the content specified under item NO 13 & 14 then a minus adjustment @ 40/- per Kg of bitumen (less consumed ) shall be appllied on the quoted rate of contractor against these items , hence the qouted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula). |
| 16 | M&L for preparing bituminous surface of road and marking 2.50 mm thick centre lines, dashes, arrows letter, marking etc and the like not exc 10 cm wide on new surface or previously treated road surface with hot applied retro-reflective thermoplastic road marking paint (white/ golden/ yellow) confirming to MORTH (clause 803.4) with 8% glass beads using special applicator machine with heating arregment upto 160 °C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender