Tender For For Deep Boring Installation With Platform At Ward No 06 Tirkey Maidan Under Mmc Jamshedpur In East Singhbhum Dist.
Tender Value
4.43 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
8 days left
EMD
8860
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for For Deep Boring Installation With Platform At Ward No 06 Tirkey Maidan Under Mmc Jamshedpur In East Singhbhum Dist.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation trenches in hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 3 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 4 | Providing and laying in position cement concrete of specified grade - All work up to plinth level : PCC(1:2:4) (1 cement : 2 coarse sand (zone-lll) :4 gradde stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers.and cantilevers. |
| 6 | providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up plinth level.1:1.5.3 (1 cement :1.5 coarse sand (zone-lll): 3 graded stone aggregate 20mmnominal size) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.(upto foundation) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.(upto roof excluding column) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landing, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral stair cases above plinth level up to floor five level , excluding the cost of centering , shuttering, finishing and reinforcement, with 1:1:5:3 (1 cement :1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size ) |
| 10 | Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.(a) 10mm (TMT,Coil Fe 500) |
| 11 | Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 12 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. |
| 13 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 14 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l. |
| 15 | Supplying Polythene water storage tank of ISI Mark (e.g. Sintex etc.) |
| 16 | Cost of drilling 200mm x 165mm x 175m deep bore well in all kinds of soil and rock in urban or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipments, as well as fule, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete.(1) From 0-50 meter |
| 17 | (2) From 51-125meter onwards |
| 18 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 19 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 20 | Supplying all tools, tackles & Lowering of 200mm Nominal dia MSERW Casing pipe 6mm thick Confirming relevent for specification, cost of pipe etc. including all taxes, VAT, excise duty, freight charges with inspection charges etc. as applicable, all complete job. |
| 21 | Supplying all material labour tools and equipment for fitting and fixing 200 mm dia MS CAP over casing pipe complete job |
| 22 | Supplying submersible pump sets confirming to lS 8034 andconfirming to lS 9283. Pump shall be suitable for varioushead and discharge with stainless steel pump shaft andnoryl impeller. Motor suitable for working on15V110%, 3PH, 50 Hz, A.C. supply with cable guard, thrustfiber bearing to withstand entire hydraulic thrust, water proofwinding shall be provided. The pump set shall be suitablefor direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valvell be provided with pump. 3 meter submersible copperductor cable in single/ double run shall be provided withSubmersible each pump.Submersible Pump 150 mm dia (with Bronzel SS impeller) up to 8 stage and 1.5 HP. |
| 23 | Supplying, installing & commissioning of panel board suitable for the motor pump set as mentioned in the item No.- 5, having voltmeter, ammeter, phase indicating lamps, Starters, main switch, fuses, inter connnection in the panel board including cost of wires etc. all complete job as per specification and direction E/I. IS 1239(Part-1990) |
| 24 | Providing and supplying in standard lenghts High density polythene pipe confirming to IS4984/14151/12786/13488 (latest revision with necessary jointing materials like mechnical connector i.e thread/ insert joint /joint excluding GRADE PE80-PN10 32MM DIA |
| 25 | Supplying, & commissioning of 5 KVA Servo Stabilizer of Sen & pandit or pagaria or approved eqivalent make (Range 90 V -300 V) single phase with cable, change over switch for submersible pump etc. all complete as per specification and direction of E/I. |
| 26 | Cost of PVC insulated copper submersible cable (2.5 sq mm x 3 core) of Finolex or equivalent make including lowering and making water proof joints including all taxes and transportation to work site etc. as per specification and direction of E/I. |
| 27 | Supplying & commissioning and fitting 10 sqmm 4 core heavy duty aluminium conductor |
| 28 | Add Carriage cost of Material Sand Lead (1K+9P)km |
| 29 | Stone chips Lead (1K+24P)km |
| 30 | Bricks Lead (1K+7P)km |
| 31 | Add cost for sign board (Attached Detail Estimate) |
| 32 | Goods & Service Tax (G.S.T.) - |
| 33 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender