Tender For For Deep Boring Installation With Laying Of Pipe At Ward 11 Jahira Path Under Mmc Jamshedpur In East Singhbhum Dist.
Tender Value
9.46 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
10 days left
EMD
18920
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for For Deep Boring Installation With Laying Of Pipe At Ward 11 Jahira Path Under Mmc Jamshedpur In East Singhbhum Dist.
BOQ
| Sl. No. | Item Description |
| 1 | Cost of drilling 200mm x 165mm x 175m deep bore well in all kinds of soil and rock in urban or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipments, as well as fule, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete.(1) From 0-50 meter |
| 2 | (2) From 51-125meter onwards |
| 3 | E/W in excavation (As per I.S. 3114/1965 For laying of different type and size of pipe so as to give one Mtr. Avarage cover over the socket of pipe with disposal of excavated earth within initial lead and as per specifaction and direction Engineer -in- Charge. |
| 4 | Supplying labour and tools for fixing G.I pipe with read lead and yarn of following nominal bore with screwed and socketted joint on wall,celing and floor including supplying and fitting of wall hook or pipe clamp,wooden plug,cutting pipe to size and threadind end if required etc.all complete as per specification. |
| 5 | GI Pipe 50 mm dia (TATA or equivalent make) as per IS-1239(part-01) / 2004 ISI Marked / Medium Quality |
| 6 | Full way Valve (ISI marked) 50mm |
| 7 | E/W in excavation (As per I.S. 3114/1965 For laying of different type and size of pipe so as to give one Mtr. Avarage cover over the socket of pipe with disposal of excavated earth within initial lead and as per specifaction and direction Engineer -in- Charge.1x200MX0.5MX1M =100M³ |
| 8 | Supplying labour and tools for fixing G.I pipe with read lead and yarn of following nominal bore with screwed and socketted joint on wall,celing and floor including supplying and fitting of wall hook or pipe clamp,wooden plug,cutting pipe to size and threadind end if required etc.all complete as per specification. |
| 9 | ProvidingP.C.C M-150 Iin nominal mix at foundn, with approved quality of stone chips 20 mm to 6mm size graded and clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing(but excluding the cost of reniforcement , taxes and royalty all complete as per building specification and direction of E/I |
| 10 | G.I. Fittings (Conforming to 1.S.- 1879) 50MM(A) GI BEND |
| 11 | (B) ELBOW |
| 12 | (G) UNION SOCKET |
| 13 | Supplying submersible pump sets confirming to lS 8034 andconfirming to lS 9283. Pump shall be suitable for varioushead and discharge with stainless steel pump shaft andnoryl impeller. Motor suitable for working on15V110%, 3PH, 50 Hz, A.C. supply with cable guard, thrustfiber bearing to withstand entire hydraulic thrust, water proofwinding shall be provided. The pump set shall be suitablefor direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valvell be provided with pump. 3 meter submersible copperductor cable in single/ double run shall be provided withSubmersible each pump.Submersible Pump 150 mm dia (with Bronzel SS impeller) up to 8 stage and 1.5 HP. |
| 14 | Supplying, installing & commissioning of panel board suitable for the motor pump set as mentioned in the item No.- 5, having voltmeter, ammeter, phase indicating lamps, Starters, main switch, fuses, inter connnection in the panel board including cost of wires etc. all complete job as per specification and direction E/I. IS 1239(Part-1990) |
| 15 | Providing and supplying in standard lenghts High density polythene pipe confirming to IS4984/14151/12786/13488 (latest revision with necessary jointing materials like mechnical connector i.e thread/ insert joint /joint excluding GRADE PE80-PN10 32MM DIA |
| 16 | Supplying, & commissioning of 5 KVA Servo Stabilizer of Sen & pandit or pagaria or approved eqivalent make (Range 90 V -300 V) single phase with cable, change over switch for submersible pump etc. all complete as per specification and direction of E/I. |
| 17 | Supplying, installing & commissioning of panel board suitable for the motor pump set as mentioned in the item No.- 5, having voltmeter, ammeter, phase indicating lamps, Starters, main switch, fuses, inter connnection in the panel board including cost of wires etc. all complete job as per specification and direction E/I. IS 1239(Part-1990) |
| 18 | Cost of PVC insulated copper submersible cable (2.5 sq mm x 3 core) of Finolex or equivalent make including lowering and making water proof joints including all taxes and transportation to work site etc. as per specification and direction of E/I. |
| 19 | Supplying & commissioning and fitting 10 sqmm 4 core heavy duty aluminium conductor |
| 20 | S/F/F Sign.Board |
| 21 | Goods & Service Tax (G.S.T.) - |
| 22 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender