Tender For Operation And Maintenance Of Water Supply Scheme For Village Kilba & Lingne In Gp Kilba, Tehsil Sangla Distt. Kinnaur (H.P.) (Jjm) (Sh:- Construction of Reinforced Cement Concrete Intake Chamber At Source, Wire Mesh Fencing Around Civil St
Tender Value
14.97 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
5 days left
EMD
29959
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Operation And Maintenance Of Water Supply Scheme For Village Kilba & Lingne In Gp Kilba, Tehsil Sangla Distt. Kinnaur (H.P.) (Jjm) (Sh:- Construction of Reinforced Cement Concrete Intake Chamber At Source, Wire Mesh Fencing Around Civil Structure At Wtp Site, Supplying, Installation And Commissioning Of Zinc Aluminium Storage Tank 20000 Ltr Capacity,C/O Retaining Wall In repair renovation Masonry Front Side Of Pre-Feb Storage Tank At Rd 0 To 6 And Construction of Polycarbonate Sheet For Wtp.)
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of excavated earth upto a lead of 20 metres:- P/J Work within all leads and lifts. |
| 2 | Excavation in earth work and disposal of excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed in Pick-Jumper work. (100%PW) |
| 3 | Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 40mm nominal size) excluding cost of centring & shuttering in foundation and plinth. |
| 4 | Providing and laying cement concrete 1:1.5:3 (1 cement: 1% sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 5 | Walls (any thickness but not less than 0.1m) including attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level) |
| 6 | Cement concrete flooring 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) laid in one layer finished with af loating coat of neat cement. (40mm thick) |
| 7 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain conrete work in. |
| 8 | Vertical surface such as wall (any thickness) Partition and the like ti./c attached pillaster buttresses plinth and string courses and the like. |
| 9 | Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level. |
| 10 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6) 2 Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal |
| 11 | Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominalsize) and curing complete excluding cost of form work in foundation and plinth |
| 12 | Providing and fixing angle Iron posts 2.50m high 50X50X5mm and welding of Wire mash of interlink chain with in all leads and lifts as per the direction of Engineer - in - charge |
| 13 | Providing, fixing & welding of MS Flat 40 x 5 mm with in all leads and lifts as per the direction of Engineer - in - charge |
| 14 | Applying priming coat over new steel & other metal surface after & including preparing the surface by thoroughly cleaning oil, grease, dirt & other foreign matter & new paper complete with ready mixed paint brushing red lead/red oxide/zinc oxide chrome. |
| 15 | Painting Two coat on G.I. sheet with ready mixed painting of approved brand & mfd of old work to give an even & great shade(Green shade). |
| 16 | Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (MS Gate with plain grill) |
| 17 | Providing and laying cement concrete 1:36 (One cement three sand six graded stone aggregate 40mm nominal inal size) and curing comple nd plinth within all leads and lifts as per the direction of work form work in foundation and plinth. |
| 18 | Providing and laying cement concrete 1:15:3 (One cement: one & half sand three nal size) and curing complete excluding the cost of 20mm graded stone aggreorce momonominal size)and curing comple and plinth within all leads and lifts as per the direction of work form work in:- |
| 19 | (Foundation and plinth.) |
| 20 | Lintle beams girders brassumers and cantilever up to any lintie beam etc. |
| 21 | Providing mild/tor steel reinforcement for reinforced concrete work including bending. binding and placing in position complete up to floor two level including within all leadsand lifts as per direction of Engineer-in-Charge. |
| 22 | Providing and fixing Zinc Aluminum steel storage tank rising capacity 100000 litrs. HDG Dome structure supporting dome roof of Zinc Aluminum including all fittings including 1 No. linear, eavy duty cage ladder Gl. 1 No Nylon rope and aluminum step ladder, access hatch on roof, inlet, outlet and over flow nozzies, level indicator of material approved by STAC and warranty of 10 years including fixing of three taps under the roof on out let pipe complete in all respect. |
| 23 | (A)Roof Specification(i)Roof Type:-Self Supported Doom Type(ii)Bulk Density Kg/Cum :-1000Kg/m^3(iii)Sesmic Zone:-Zone IV(iv)Roof Angle:- 30° (v)Wind Speed :-180 km/hr(vi)Roof Structure :- Hot Dipped Ganvanized(B)Technical Specifications of Sheet(i)Wall Sheet Yield strength :-300 MPA(ii)Wall Sheet Tensile strength :-340 MPA(iii)Elongation :-18%(iv)Sheet Corrugation Space :-75mm(v)Depth:- 18mm(vi)Thickness:-0.8mm each Corrugated Sheet(vii)Sheet Galvanize Coating:- Zincalume(C )Technical Specifications of Liner(i)Weight/ Sqm (GSM):-760 gsm(ii)Anti-Algae Stabilized:- Yes(iii)Both side PVC Food Grade:-Yes(iv)Thickness (mm) :-0.8mm(v)Water Proofness :- 200 PSI(vi)Standerd Colour :- Grey(vii)Basic Febric :-High Teenacity Polyster Filment Yarn(viii)Tempreture :-20 to +60 Degree Celcius(ix)PH Range :- 3 to 13(x)Tasted :-2 kg/cm² for any leaks |
| 24 | Providing laying and fixing to wall ceiling and floor galvanised mild steel tube, tube fitting (light grade) and clamps including making good the wall ceiling and floor an cutting welding of G.I. pipe with M.S. flanges table -5 where required in Inlet, Outle Scour and by pass arrangement of following dia. |
| 25 | i) Scour pipe 50 mm.dia |
| 26 | Fixing cast irom sluice valves of different dias with hand wheel complete in all respect. |
| 27 | i) Scour pipe 50 mm.dia |
| 28 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. With |
| 29 | Beams, girders brassumers and cantilever up to any linte beam etc. |
| 30 | Fine sand filling for storage tank |
| 31 | Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth: |
| 32 | Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement: 6 sand) in breast walls and retaining walls. Including all lead lifts and carriage of material at site and as per the direction of Engineer in Charge. |
| 33 | P/L CC Topping in 1:3:6 |
| 34 | Stone filling behind the retaining wall with in all leads and lifts. |
| 35 | Steel work welded in hollow structural sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. |
| 36 | In beams joists, Hollow structural sections, channels, angles, tees, flats with connection plates or angle cleats as in main and cross beams hip and jack rafters purlins connected to common rafters and the like. |
| 37 | Providing corrugated Polycarbonate sheet roofing fixed with galvanised iron Hex flange head self drilling screw with EPDM washer (12x55mm) for roofing application complete excluding the cost of purlins rafters and trusses. |
| 38 | (In Mono pitched roof/Lean-to-roof) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender