Tender For annual repair & maintenance of Various Type- I To Type- Vi Gad Qtrs At Kasumpti, Shimla-9. (Sh:- External Repair And Painting, Repair Of Windows, providing and Fixing Rainwater Pipes In Type-Ii Set No. 01 To 09 At Dhalli Under Kasumpti Sec
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
8800
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Various Type- I To Type- Vi Gad Qtrs At Kasumpti, Shimla-9. (Sh:- External Repair And Painting, Repair Of Windows, providing and Fixing Rainwater Pipes In Type-Ii Set No. 01 To 09 At Dhalli Under Kasumpti Section. ) (Excluding Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Finishing wall with weather proof exterior grade emulsion of approved design Apexultima Protek ) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) One or more coats on old work (Excluding GST) |
| 5 | Repair to plaster in patches of 2.50 square meter under and upto 10 to 15mm thick including cutting the patch in proper shape and re-plastering the surface of wall including disposal to the dumping ground with a lead of 20 metres with including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) Cement Mortar 1:5(One cement: Five sand). (Excluding GST) |
| 6 | Providing and Fixing Scaffolding in building side including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) One or more coats on old work. (Excluding GST) |
| 7 | Providing and applying base coat for Apex Ultima Protek including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 8 | Lettering with black Japan paint of approved brand and manufacturing carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 9 | Removing dry or oil bound distemper, water proofing cement paint and the like By scrapping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 10 | Disposal of muck /denris/ excavated earth upto site approved by Municipal Corporation surrounding Shimla upto all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 11 | Finishing wall with weather proof exterior grade emulsion of approved design Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 12 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110 mm dia. (Excluding GST) |
| 13 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110 mm dia. (Excluding GST) |
| 14 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) (i) 110 mm dia. |
| 15 | Providing and fixing PVC cowl in PVC pipe, including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 16 | Providing and fixing panelled glazed or shutters for doors windows and clerestory windows. Fixing with but hinges of required size with necessary screws,excluding panelling with will be paid for seprately , all complete as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. (Excluding GST) |
| 17 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick 2nd class deodar wood (Excluding GST) |
| 18 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 150x10mm (Excluding GST) |
| 19 | (ii) 200x10 mm (Excluding GST) |
| 20 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm (Excluding GST) |
| 21 | Providing and fixing bright finished brass hard drawn hooks and eyes including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 200 mm (Excluding GST) |
| 22 | Providing wood work in frames of doors,windows, clerestory,windows and other frames wrought,framed and fixed in position including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2nd class marindi wood (Excluding GST) |
| 23 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6(1cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required completge, including disposal of rubbish to the dumping ground, all complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Window chowkats. (Excluding GST) |
| 24 | Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (Sixteen into three point fifteen milimetre) lugs 10 cm.(Ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm(Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6(One cement:Three sand:Six graded stone aggregate 20mm(Twenty milimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. n all leads and lifts as per directions of the Engineer-in-Charge. (i) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15 x 10 x 10 cm of CC 1:3:6 (Excluding GST) |
| 25 | Extra for Providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type) , approved shape and section with screws instead of glazing clips and metal sash putty , in steel doors, windows , ventilators and composite units, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 26 | Providing and fixing MS Tubular frames for doors , windows , ventilators and cupbords with rectangular/ LType sections made of 1.60 mm thick M.S sheet, joints mitred , welded and grinded finsih with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming cost of approved steel primer including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15 x 10 x 10 cm of CC 1:3:6 (Excluding GST) |
| 27 | Providing and fixing M.S stays and clamps for PVC pipes of diameter 20 mm, including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 28 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty (i) Float glass panes of nominal thickness 4 mm including carriage of materials in all leads as per directions of the Engineer-in-Charge. (weight not less than 10kg/sqm) (Excluding GST) |
| 29 | Froster glass 5 mm thick (Excluding GST) |
| 30 | Providing and Fixing Bambi in gutter , including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender