Tender For Repair Of Damaged Radial Gate No 1 Sill Beam And Microcrete Etc. At Barrage Of 3X42 Mw Larji Hydro Electric Power Plant Under Sr. Executive Engineer (C/M), Civil maintenance Division, Hpsebl, Thalout (H.P)
Tender Value
15.81 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
7 days left
EMD
15820
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Damaged Radial Gate No 1 Sill Beam And Microcrete Etc. At Barrage Of 3X42 Mw Larji Hydro Electric Power Plant Under Sr. Executive Engineer (C/M), Civil maintenance Division, Hpsebl, Thalout (H.P)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and filling used cement bags with excavated silt /other material & laying them in position to prevent water leakage in the working area complete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge. |
| 2 | Hiring of 5 H.P, sebmersible Pump with operator & heads up to 15 m to drain the leakage water in radial gate 1 during the repair work in the seal beam complete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge. |
| 3 | Dismantling steel work in built up section in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 4 | Demolishing cement manually/by mechanical means, including disposal of material within 50metres leadas per direction of Engineer- incharge |
| 5 | Surface preparation by chipping loose chunk and material in spillway glacis block. |
| 6 | Applaying epoxy rasin bonding agent Fosroc Nitobond EP or equivalent on cement concrete plastered surface after and including preparing the surface by throughly cleaning oil grease dirt and other foreign matter, sand papering as required.. |
| 7 | Drilling of holes 20mm Ø for fixing of 16mm bar 500 mm deep anchors with epoxy resin Lokfix E77 or equivalent in the RCC work in Glaics block as per the direction of the Engineer-in-charge. |
| 8 | Drilling of holes 20mm Ø for fixing of 16 mm SS bolt 300 mm deep anchors in the beam base with epoxy resin Lokfix E77 as per the direction of the Engineer-in-charge. |
| 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 10 | Fixing the SS plate 12 mm thick of stainless-steel (SS) sill beam of approved grade of Radial gate-1 with specified welding and other arrangements at barrage of Larji HEP complete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge.. |
| 11 | Providing & grouting of Conbextra EP 10 grout after drilling /welding of holes and fixing of nozzles, grouting the nozzle with a mixture of sensitive epoxy grout Fosroc, complete in all respects, including cost of grout pump, materials, drilling, , etc., for supporting the sill beam level of Radial gate No.1 complete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge. |
| 12 | Fixing of NG Rails as per drawing to be welding on MS channels ISCR 100x50@ 2500 c/c and to be holded with additional anchors 16 mm bar by welding at the bottom of Rails complete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge. |
| 13 | Supplying and fixing MS wire welded mesh of 50 mmx50mmx4mm thick between NG rail in the Glacis block by welding with laid NG rail and anchors complete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge. |
| 14 | Providing and laying microcrete of fosroc Rendroc RG 65 or equivalent with a design mix suitable for damp conditions in thespillway Glacis Blockcomplete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge. |
| 15 | Applying high-strength abrasion Fosroc Nitomortar S or equivalent on micro-concrete after the Nitobond surface forms a thick, ultra-dense protective shield, including preparing the surface as required complete in all respects as Technical Specifications of the SBD and directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender