Tender For Improvement Works To Peelamedu Corporation Division Office At Pioneer Mill Road At Ward No 26 North Zone Roc No. 4344/2026/Md2
Tender Value
14.77 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
12 days left
EMD
14770
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works To Peelamedu Corporation Division Office At Pioneer Mill Road At Ward No 26 North Zone Roc No. 4344/2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of reinforced cement concrete complete direction as per the departmental officers |
| 2 | Dismantling of old damaged brickwork in cement mortor complete direction as per the departmental officers |
| 3 | Earth work excavation in all soils with initial lead and lift etc. complete as per direction of departmental officers |
| 4 | Desilting of existing drain complete as per direction of departmental officers |
| 5 | Conveyance of excavated earth complete as per direction of departmental officers |
| 6 | Jungle cleaning for cleaning scrub jungle complete as per direction of departmental officers |
| 7 | Providing,laying spreading and compacting WetMix Macadam with clean crushed,grade d aggregates and granular material and finished in accordance with the requirements of the specifications and thickness as per approved plans or as directed by the engineer. |
| 8 | Providing pile foundation complete as per direction of departmental officers |
| 9 | Plain cement concrete in 1:4:8 mix using 40mm HBG Metal from approved Quarry etc complete |
| 10 | Supplying and erecting centering for sides and soffits including supports and strutting for plain surfaces such as Plain cement concrete walls etc., with all cross bracing etc., including decentering after curing period,complete complying with standard specifications, at all leads inside the building, at all heights. |
| 11 | Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for all RCC items of work excluding centering, shuttering and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete |
| 12 | Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification |
| 13 | Flyash Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9\\" X 4 1/2\\" X 3\\" for the following including curing etc., completed. |
| 14 | Filling with Quarry Rubbish including watering and consolidation layer by layer with all incidental charges etc complete |
| 15 | Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength ofHydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape ofapproved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications |
| 16 | Supply and Fixing of M.S. Door using all round 25x25x6 mm thick cross bracing 20x6 mm M.S. Flats and M.S. sheet 18g with necessary locking arrangements including one coat of Red oxide paint (0.60 x 1.85m) |
| 17 | Providing of galvanised iron sheets complete direction as per the departmental officers |
| 18 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications |
| 19 | Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications |
| 20 | Providing and laying of 25mm compacted thick Semidence Bituminous Concrete using 0.10m3 of 11.2mm IRC metal/ 0.16m3 of 6.7mm IRC metal and 0.11 m3 of 2.8mm and below with 24 kgs of bitumen of grade 60/70 for premixing per 10 m2 including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tonnes capacity conveying the mix by tipper trucks to power site spreading the mix in required temperature for uniform thickness of 25mm with mechancial paver to the specified grades and cross section and compaction by 80-100 KN power roller to the required density etc., including labour for loading bitumen into bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire chrages and fuel charges for 20-30 T CMP with bitumen boiler, tipper trucks, power finisher power rollers and all another tools and plant required including all other incidental charges etc., completed as per specification using cmp clause 511 of MOST specification. |
| 21 | Flooring with bed of cement concrete 1:2:4 (One part of cement, two parts of sand and four parts of stone jelly by volume) using 20 mm thick granite hard broken stones, all machine mixed, laid to uniform thickness of 100mm and top left rought to receive floor finish including all labour charges for concreting, ramming, curing etc, and providing expansion joints, slopes & grades if any etc., complete complying with relevant standard specifications at all leads & lifts inside the building. |
| 22 | Plastering in Cement Mortar 1:5 mix 12mm thick |
| 23 | Painting with enamel paint two coats for doors, windows, grills, weldmesh etc |
| 24 | Painting with first quality emulsion paint two coats over a priming coat including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed. |
| 25 | Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Fan point (For Electronic regulator) SD- 16 |
| 26 | Supply and fixing of box type 4 40W flourescent tube wiring complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC un sheathed copper leads from terminals to the fitting |
| 27 | Supply and fixing of 40W street light fititng complete direction as per the departmental officers |
| 28 | Supply and fixing of 3 core 6sqmm aluminium flat cable for street light fititng complete direction as per the departmental officers Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender